diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py index 742d1872cb..56abfc0fa1 100755 --- a/cura/BuildVolume.py +++ b/cura/BuildVolume.py @@ -880,7 +880,7 @@ class BuildVolume(SceneNode): result[extruder.getId()] = [] # Currently, the only normally printed object is the prime tower. - if self._global_container_stack.getProperty("prime_tower_enable", "value"): + if self._global_container_stack.getProperty("prime_tower_mode", "value") != 'none': prime_tower_size = self._global_container_stack.getProperty("prime_tower_size", "value") machine_width = self._global_container_stack.getProperty("machine_width", "value") machine_depth = self._global_container_stack.getProperty("machine_depth", "value") @@ -1208,7 +1208,7 @@ class BuildVolume(SceneNode): _raft_settings = ["adhesion_type", "raft_base_thickness", "raft_interface_layers", "raft_interface_thickness", "raft_surface_layers", "raft_surface_thickness", "raft_airgap", "layer_0_z_overlap"] _extra_z_settings = ["retraction_hop_enabled", "retraction_hop"] _prime_settings = ["extruder_prime_pos_x", "extruder_prime_pos_y", "prime_blob_enable"] - _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"] + _tower_settings = ["prime_tower_mode", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"] _ooze_shield_settings = ["ooze_shield_enabled", "ooze_shield_dist"] _distance_settings = ["infill_wipe_dist", "travel_avoid_distance", "support_offset", "support_enable", "travel_avoid_other_parts", "travel_avoid_supports", "wall_line_count", "wall_line_width_0", "wall_line_width_x"] _extruder_settings = ["support_enable", "support_bottom_enable", "support_roof_enable", "support_infill_extruder_nr", "support_extruder_nr_layer_0", "support_bottom_extruder_nr", "support_roof_extruder_nr", "brim_line_count", "skirt_brim_extruder_nr", "raft_base_extruder_nr", "raft_interface_extruder_nr", "raft_surface_extruder_nr", "adhesion_type"] #Settings that can affect which extruders are used. diff --git a/plugins/LegacyProfileReader/DictionaryOfDoom.json b/plugins/LegacyProfileReader/DictionaryOfDoom.json index f65cc271d1..90e973b779 100644 --- a/plugins/LegacyProfileReader/DictionaryOfDoom.json +++ b/plugins/LegacyProfileReader/DictionaryOfDoom.json @@ -68,7 +68,7 @@ "meshfix_keep_open_polygons": "fix_horrible_use_open_bits", "magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"", "magic_spiralize": "spiralize", - "prime_tower_enable": "wipe_tower", + "prime_tower_mode": "\"normal\" if wipe_tower else \"none\"", "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))", "ooze_shield_enabled": "ooze_shield", "skin_overlap": "fill_overlap" diff --git a/plugins/SliceInfoPlugin/SliceInfo.py b/plugins/SliceInfoPlugin/SliceInfo.py index be021251da..f61f5cf295 100755 --- a/plugins/SliceInfoPlugin/SliceInfo.py +++ b/plugins/SliceInfoPlugin/SliceInfo.py @@ -263,7 +263,7 @@ class SliceInfo(QObject, Extension): print_settings["retraction_enable"] = global_stack.getProperty("retraction_enable", "value") # Prime tower settings - print_settings["prime_tower_enable"] = global_stack.getProperty("prime_tower_enable", "value") + print_settings["prime_tower_mode"] = global_stack.getProperty("prime_tower_mode", "value") # Infill settings print_settings["infill_sparse_density"] = global_stack.getProperty("infill_sparse_density", "value") diff --git a/plugins/XmlMaterialProfile/XmlMaterialProfile.py b/plugins/XmlMaterialProfile/XmlMaterialProfile.py index 41beb88419..98c0f95e10 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialProfile.py +++ b/plugins/XmlMaterialProfile/XmlMaterialProfile.py @@ -579,8 +579,9 @@ class XmlMaterialProfile(InstanceContainer): meta_data[tag_name] = entry.text - if tag_name in self.__material_metadata_setting_map: - common_setting_values[self.__material_metadata_setting_map[tag_name]] = entry.text + for tag_name, value in meta_data.items(): + if tag_name in self.__material_metadata_setting_map: + common_setting_values[self.__material_metadata_setting_map[tag_name]] = value if "description" not in meta_data: meta_data["description"] = "" @@ -1222,7 +1223,9 @@ class XmlMaterialProfile(InstanceContainer): "diameter": "material_diameter" } __material_metadata_setting_map = { - "GUID": "material_guid" + "GUID": "material_guid", + "material": "material_type", + "brand": "material_brand", } # Map of recognised namespaces with a proper prefix. diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json index cd59e1c169..83af53fb3c 100644 --- a/resources/definitions/atmat_signal_pro_base.def.json +++ b/resources/definitions/atmat_signal_pro_base.def.json @@ -110,7 +110,7 @@ "min_infill_area": { "value": "5.0" }, "minimum_polygon_circumference": { "value": "0.2" }, "optimize_wall_printing_order": { "value": "True" }, - "prime_tower_enable": { "value": "True" }, + "prime_tower_mode": { "value": "normal" }, "retraction_amount": { "value": "1" }, "retraction_combing": { "value": "'noskin'" }, "retraction_combing_max_distance": { "value": "10" }, diff --git a/resources/definitions/deltacomb_dc20flux.def.json b/resources/definitions/deltacomb_dc20flux.def.json index f81909dae5..50f69636bd 100644 --- a/resources/definitions/deltacomb_dc20flux.def.json +++ b/resources/definitions/deltacomb_dc20flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_enable": { "value": true }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc21flux.def.json b/resources/definitions/deltacomb_dc21flux.def.json index dbcdf3ad37..e09fbeca63 100644 --- a/resources/definitions/deltacomb_dc21flux.def.json +++ b/resources/definitions/deltacomb_dc21flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_enable": { "value": true }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc30flux.def.json b/resources/definitions/deltacomb_dc30flux.def.json index 4a42ae4d63..f59bf53a9a 100644 --- a/resources/definitions/deltacomb_dc30flux.def.json +++ b/resources/definitions/deltacomb_dc30flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_enable": { "value": "1" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/dxu_dual.def.json b/resources/definitions/dxu_dual.def.json index 6d30af005f..8fb2092b65 100644 --- a/resources/definitions/dxu_dual.def.json +++ b/resources/definitions/dxu_dual.def.json @@ -6,6 +6,6 @@ { "machine_end_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\"" }, "machine_start_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" }, - "prime_tower_enable": { "default_value": true } + "prime_tower_mode": { "default_value": "normal" } } } \ No newline at end of file diff --git a/resources/definitions/elegoo_neptune_2D.def.json b/resources/definitions/elegoo_neptune_2D.def.json index c9aa5a0184..2d5ef0024e 100644 --- a/resources/definitions/elegoo_neptune_2D.def.json +++ b/resources/definitions/elegoo_neptune_2D.def.json @@ -55,8 +55,8 @@ "settable_per_extruder": false }, "prime_blob_enable": { "default_value": false }, - "prime_tower_enable": { "default_value": true }, "prime_tower_min_volume": { "default_value": 90 }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_size": { "default_value": 30 }, "raft_airgap": { "default_value": 0.25 }, "raft_margin": { "default_value": 5 }, diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 2f63bf5798..1d453456a8 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -76,6 +76,22 @@ "type": "str", "enabled": false }, + "material_type": + { + "label": "Material Type", + "description": "The type of material used.", + "default_value": "", + "type": "str", + "enabled": false + }, + "material_brand": + { + "label": "Material Brand", + "description": "The brand of material used.", + "default_value": "", + "type": "str", + "enabled": false + }, "material_diameter": { "label": "Diameter", @@ -963,7 +979,7 @@ "description": "Width of a single prime tower line.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 0.4, "value": "line_width", "minimum_value": "0.001", @@ -3347,7 +3363,7 @@ "description": "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal.", "type": "float", "unit": "mm/s", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 60, "value": "speed_print", "minimum_value": "0.1", @@ -3725,7 +3741,7 @@ "maximum_value_warning": "10000", "default_value": 3000, "value": "acceleration_print", - "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('acceleration_enabled')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('acceleration_enabled')", "settable_per_mesh": false } } @@ -4044,7 +4060,7 @@ "maximum_value_warning": "50", "default_value": 20, "value": "jerk_print", - "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('jerk_enabled')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('jerk_enabled')", "settable_per_mesh": false } } @@ -6778,14 +6794,20 @@ "description": "Settings used for printing with multiple extruders.", "children": { - "prime_tower_enable": + "prime_tower_mode": { - "label": "Enable Prime Tower", - "description": "Print a tower next to the print which serves to prime the material after each nozzle switch.", - "type": "bool", + "label": "Prime Tower", + "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.", + "type": "enum", + "value": "'none' if (extruders_enabled_count < 2) else ('interleaved' if (all(material_type_var == extruderValues('material_type')[0] for material_type_var in extruderValues('material_type')) and all(material_brand_var == extruderValues('material_brand')[0] for material_brand_var in extruderValues('material_brand'))) else 'normal')", + "options": + { + "none": "None", + "normal": "Normal", + "interleaved": "Interleaved" + }, + "default_value": "none", "enabled": "extruders_enabled_count > 1", - "default_value": false, - "resolve": "(extruders_enabled_count > 1) and any(extruderValues('prime_tower_enable'))", "settable_per_mesh": false, "settable_per_extruder": false }, @@ -6795,7 +6817,7 @@ "description": "The width of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 20, "resolve": "max(extruderValues('prime_tower_size'))", "minimum_value": "0", @@ -6814,7 +6836,20 @@ "default_value": 6, "minimum_value": "0", "maximum_value_warning": "(resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height') - sum(extruderValues('prime_tower_min_volume')) + prime_tower_min_volume", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "settable_per_mesh": false, + "settable_per_extruder": true + }, + "prime_tower_max_bridging_distance": + { + "label": "Prime Tower Maximum Bridging Distance", + "description": "The maximum length of the branches which may be printed over the air.", + "unit": "mm", + "type": "float", + "default_value": 5, + "minimum_value": "line_width", + "maximum_value_warning": "10.0", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "settable_per_mesh": false, "settable_per_extruder": true }, @@ -6824,7 +6859,7 @@ "description": "The x coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 200, "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_x')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)", "maximum_value": "(machine_width / 2 if machine_center_is_zero else machine_width) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)", @@ -6838,7 +6873,7 @@ "description": "The y coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 200, "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_y')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)", "maximum_value": "(machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)", @@ -6851,7 +6886,7 @@ "label": "Wipe Inactive Nozzle on Prime Tower", "description": "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower.", "type": "bool", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": true, "settable_per_mesh": false, "settable_per_extruder": true @@ -6862,7 +6897,7 @@ "label": "Prime Tower Base", "description": "By enabling this setting, your prime-tower will get a brim, even if the model doesn't. If you want a sturdier base for a high tower, you can increase the base height.", "type": "bool", - "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('adhesion_type') != 'raft'", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('adhesion_type') != 'raft'", "default_value": false, "settable_per_mesh": false, "settable_per_extruder": false @@ -6874,7 +6909,7 @@ "description": "The width of the prime tower brim/base. A larger base enhances adhesion to the build plate, but also reduces the effective print area.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 1.2, "minimum_value": "0", "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)", @@ -6888,7 +6923,7 @@ "description": "The height of the prime tower base. Increasing this value will result in a more sturdy prime tower because the base will be wider. If this setting is too low, the prime tower will not have a sturdy base.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 0, "minimum_value": "0", "maximum_value": "machine_height", @@ -6900,7 +6935,7 @@ "label": "Prime Tower Base Slope", "description": "The magnitude factor used for the slope of the prime tower base. If you increase this value, the base will become slimmer. If you decrease it, the base will become thicker.", "type": "float", - "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 4, "minimum_value": "0", "maximum_value": "10", @@ -6918,7 +6953,7 @@ "minimum_value": "0", "minimum_value_warning": "raft_base_line_width", "maximum_value_warning": "100", - "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('adhesion_type') == 'raft'", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, "limit_to_extruder": "raft_base_extruder_nr" diff --git a/resources/definitions/leapfrog_bolt_pro.def.json b/resources/definitions/leapfrog_bolt_pro.def.json index e4a13217e5..449967072f 100644 --- a/resources/definitions/leapfrog_bolt_pro.def.json +++ b/resources/definitions/leapfrog_bolt_pro.def.json @@ -80,7 +80,7 @@ "material_final_print_temperature": { "value": "default_material_print_temperature" }, "material_initial_print_temperature": { "value": "default_material_print_temperature" }, "material_standby_temperature": { "enabled": false }, - "prime_tower_enable": { "resolve": "extruders_enabled_count > 1" }, + "prime_tower_mode": { "resolve": "'normal' if extruders_enabled_count > 1 else 'none'" }, "retraction_amount": { "default_value": 2 }, "retraction_combing": { "value": "'all'" }, "skirt_line_count": { "default_value": 3 }, diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json index f4ce358be1..89eeac9b75 100644 --- a/resources/definitions/lotmaxx_sc60.def.json +++ b/resources/definitions/lotmaxx_sc60.def.json @@ -44,8 +44,8 @@ "machine_width": { "default_value": 235 }, "meshfix_maximum_resolution": { "value": 0.25 }, "optimize_wall_printing_order": { "value": true }, - "prime_tower_enable": { "value": true }, "prime_tower_min_volume": { "value": 30 }, + "prime_tower_mode": { "value": "normal" }, "retract_at_layer_change": { "value": false }, "retraction_amount": { "value": 4.5 }, "roofing_layer_count": { "value": 1 }, diff --git a/resources/definitions/strateo3d_IDEX420.def.json b/resources/definitions/strateo3d_IDEX420.def.json index d4236c126e..785301c51e 100644 --- a/resources/definitions/strateo3d_IDEX420.def.json +++ b/resources/definitions/strateo3d_IDEX420.def.json @@ -112,8 +112,8 @@ "machine_use_extruder_offset_to_offset_coords": { "default_value": false }, "machine_width": { "default_value": 420 }, "material_diameter": { "default_value": 1.75 }, - "prime_tower_enable": { "default_value": true }, "prime_tower_min_volume": { "default_value": 35.6 }, + "prime_tower_mode": { "default_value": "normal" }, "raft_acceleration": { "value": "machine_acceleration" }, "raft_base_acceleration": { "value": "machine_acceleration" }, "raft_interface_acceleration": { "value": "machine_acceleration" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 17a4b6045e..9e4c9310c8 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -149,7 +149,7 @@ "enabled": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" }, - "prime_tower_enable": { "default_value": true }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_position_x": { "value": "185" }, "prime_tower_wipe_enabled": { "default_value": false }, "retraction_amount": { "value": "6.5" }, diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 6e40f0bbf1..b046657f4c 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -346,9 +346,9 @@ "prime_tower_base_curve_magnitude": { "value": 2 }, "prime_tower_base_height": { "value": 6 }, "prime_tower_base_size": { "value": 10 }, - "prime_tower_enable": { "value": false }, "prime_tower_flow": { "value": "material_flow" }, "prime_tower_line_width": { "value": 1 }, + "prime_tower_mode": { "value": "none" }, "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" }, "prime_tower_wipe_enabled": { "value": true }, "print_sequence": { "enabled": false }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 483825df5a..47a81035c9 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -103,7 +103,7 @@ "default_value": false, "enabled": true }, - "prime_tower_enable": { "value": "True" }, + "prime_tower_mode": { "value": "normal" }, "retraction_amount": { "value": "6.5" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index cd48c4fd38..30ad07dd2c 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -104,7 +104,7 @@ "default_value": false, "enabled": true }, - "prime_tower_enable": { "value": "True" }, + "prime_tower_mode": { "value": "normal" }, "retraction_amount": { "value": "6.5" }, "retraction_combing": { "value": "'no_outer_surfaces'" }, "retraction_hop": { "value": "2" }, diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index f4da80ded9..54807c88b3 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg index a052562cd3..312313c9c5 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 145cd34ead..485e82345a 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg index e6e2cb78a0..7fb90fd093 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index 56587fe883..ce3fe8c60b 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg index 10353f6110..a95c6ce5d3 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg index 33b5c2c111..2e0d11b6eb 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg index 5be0dc9527..fc487f97e4 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg index 76aa867f8f..3eef71ef41 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg index 20bb125cd9..35534c090e 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg index cc0224cf23..d61061ff55 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg index ec2ebdc647..df09da8d68 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg index 136ec93d16..be38167856 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg index 3a0a94782c..24299680ad 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg index 719a4bdcbd..2c89d60680 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg index 4486a1d3bc..c3cbb96ae7 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg index b938502e85..5e062678c3 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg index 3b88ca6b67..b9651ddf53 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg index 4134717770..3e36641037 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg index e267e7c6eb..bdb9ca3ce5 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg index 35e2e07b41..741e6c613a 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg index dd944cbfd1..c8421e34a5 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg index 8aa462e206..39bafd45c6 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg index 0691a01deb..c73c5baecd 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg index a4d0582c3a..b9f63dff35 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg index 831e17c018..86e03b328c 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg index d9a57d6012..b51b54cb62 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg index 8408fbc014..82ad7d5d49 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg index 18c813a79a..dcc7dfcd48 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg index 660c536a5e..d0fb6ec6e2 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg index 5dbea58c49..1817111e2a 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg index 9bfd649e99..8ba8f905d6 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg index d5a2f73729..82cfb879dd 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg @@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg index e86f454664..3b8cc5bb5f 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg @@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg index db7e5a43c7..23e6730f11 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg @@ -17,7 +17,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg index d84cc9e656..f305930448 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg @@ -20,7 +20,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg index b6c63fad0f..cfc8fb9b32 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg index 1e3eec080a..52ebc5566b 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg index 09bc57ffea..683bfe317a 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg index 66eb9f49c0..40cc88859a 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg @@ -11,7 +11,7 @@ type = quality variant = 0.40mm_Elegoo_Nozzle [values] -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 skin_overlap = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg index 209ce52fa2..6043a569d0 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg @@ -11,7 +11,7 @@ type = quality variant = 0.40mm_Elegoo_Nozzle [values] -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg index 9805a1ae5a..3076011555 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg @@ -12,7 +12,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] infill_sparse_density = 15 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 skin_overlap = 20 top_bottom_thickness = 0.8 diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg index cb6ca323e6..562b84bf02 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg @@ -14,7 +14,7 @@ variant = 0.40mm_Elegoo_Nozzle infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 skin_overlap = 20 top_bottom_thickness = 0.9 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg index d9f0a0aaea..7178468de7 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg index 620622e555..cb966418ec 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg index 05eeb68305..23733ea85e 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg index b63ef09a6b..01577a46d0 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg @@ -29,7 +29,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg index 038affd56f..dc279c6232 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 20 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg index 5091d36813..d5684e3ccb 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 45 / 60) speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg index 0420284fa8..bd43496eb4 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 40 / 50) speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg index 927bdbe7b9..420b8a9d9c 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 40 / 55) speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg index 02d1292c17..ec682feabd 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg index b1c540d01e..591e6e2964 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg index 6aac1f4972..604e491db3 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg index e831dfb254..e610dcf495 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg @@ -34,7 +34,7 @@ material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg index 6e0ac10718..37d77be67c 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_print = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg index 5e84c3e1a1..f27381d0e3 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg index 8974dcbb03..1c49689b2a 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg index cbada0be18..82b3f109f4 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg index 70817b06e3..e6e18da492 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_print = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg index b6991202b2..50b8662604 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg index 930f5cf3fd..baf7af3fdc 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg index 6595446fee..bf5fb6b1c9 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg index 1904758532..86216145d9 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature + 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg index 2a0a5729ec..7d4abe2d3f 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 13 material_print_temperature_layer_0 = =material_print_temperature + 3 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg index 304c4f17f0..3aace2ea38 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 15 material_print_temperature_layer_0 = =material_print_temperature + 3 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg index bc712bf999..04b769ec81 100644 --- a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg index c51c068ae2..5f7216e9b8 100644 --- a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg index 3b6749dfb9..0f4b43d1ad 100644 --- a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg index 45418e5994..bf262d9b0d 100644 --- a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg index 90424ee65e..6f15ddf686 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg index 7857ed00e7..e56ee10a98 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg index 4194c6f3b7..c8c93a744f 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg index 87dd876588..70db87df10 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg index 891a20540d..a134533c46 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg index e009094760..d8c5450478 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg index 947c042b8c..f941d5a55d 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg index 08cb14cb26..d96bf8d17e 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal raft_margin = 10 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg index 187ed1f212..53142e5348 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg index 10b6e8185a..5a4cb62ee2 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg index ed0fc7fd8a..4168b05c61 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal raft_margin = 10 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg index 9def9ecb97..af930c749a 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg index 4c3f60a240..dab7612a6c 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg index 1b7c05ac3c..7ec446e803 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg index 7cbb60c3aa..9913ea3779 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg @@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg index 4994e3f9f4..54d9c23b98 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg @@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature + 19 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg index fd15d041b8..289e9d48b7 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg @@ -31,8 +31,8 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg index 5c88fb165f..c8cad9bb3f 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg @@ -30,8 +30,8 @@ material_initial_print_temperature = =material_print_temperature material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/nps/nps_ABS_B.inst.cfg b/resources/quality/nps/nps_ABS_B.inst.cfg index 3f700405bd..520bda4b05 100644 --- a/resources/quality/nps/nps_ABS_B.inst.cfg +++ b/resources/quality/nps/nps_ABS_B.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 100 material_flow = 96 material_print_temperature = =default_material_print_temperature + 13 material_print_temperature_layer_0 = =243 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_ABS_C.inst.cfg b/resources/quality/nps/nps_ABS_C.inst.cfg index 6138e4004c..1131f61d36 100644 --- a/resources/quality/nps/nps_ABS_C.inst.cfg +++ b/resources/quality/nps/nps_ABS_C.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 100 material_flow = 91 material_print_temperature = =default_material_print_temperature + 15 material_print_temperature_layer_0 = =245 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_A.inst.cfg b/resources/quality/nps/nps_PC_A.inst.cfg index 8665f8ceae..90cc71d951 100644 --- a/resources/quality/nps/nps_PC_A.inst.cfg +++ b/resources/quality/nps/nps_PC_A.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 100 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =280 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_B.inst.cfg b/resources/quality/nps/nps_PC_B.inst.cfg index 9ccb5cea53..3761d802d7 100644 --- a/resources/quality/nps/nps_PC_B.inst.cfg +++ b/resources/quality/nps/nps_PC_B.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 88 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_C.inst.cfg b/resources/quality/nps/nps_PC_C.inst.cfg index 30267d4237..85752e78c2 100644 --- a/resources/quality/nps/nps_PC_C.inst.cfg +++ b/resources/quality/nps/nps_PC_C.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 88 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_A.inst.cfg b/resources/quality/nps/nps_PETG_A.inst.cfg index 3cae430f1c..0985dd1b3a 100644 --- a/resources/quality/nps/nps_PETG_A.inst.cfg +++ b/resources/quality/nps/nps_PETG_A.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 80 material_flow = 98 material_print_temperature = =default_material_print_temperature + 20 material_print_temperature_layer_0 = =230 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_B.inst.cfg b/resources/quality/nps/nps_PETG_B.inst.cfg index 5860f65414..e3a5f165ad 100644 --- a/resources/quality/nps/nps_PETG_B.inst.cfg +++ b/resources/quality/nps/nps_PETG_B.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 80 material_flow = 95 material_print_temperature = =default_material_print_temperature + 20 material_print_temperature_layer_0 = =230 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg index 39ba32a332..0569a356f3 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg index dd0d167e6b..e906508f7f 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg index f894a7dc13..a883aba2ec 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg index 7642489c2a..dc595e8c5d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg index bf5c18405b..a84b12135f 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg index 6756384e4a..ef6358a6a0 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg index 978484d813..7a0cd7ee8d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg index bcec4fe68f..4fa5d070aa 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg index 85f79ebe7a..7944c44371 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg index 9b29e49624..fb2ee81c9f 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg index 07a46f0d05..4e63f1513d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg index 60410d8d34..5e158007ab 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg index 9304630630..f73adbfa51 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg index d39d91c91a..da2aa05237 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg index e716824cf0..e636a5ebee 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg index bd964bed2a..a997ac74dd 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg index cd27f77737..7055e3dadd 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg index 78191af7be..6c66ffd76c 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg index f37a3b4d6d..f451618a28 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 260 material_print_temperature_layer_0 = 265 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg index 75fed99b1e..5866dad50b 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg index 51911c3811..502dd8be07 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg index e4596d9def..5279228105 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg @@ -33,7 +33,7 @@ material_flow = 105 material_flow_layer_0 = 120 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg index d0faf6eb66..92c62d2b43 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg index 3a64a52254..92811521ac 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg index debf74ed0d..234d33c2eb 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg index 990d5cf645..76ea2997ba 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg index 82f26cd66d..fc3d8e47ec 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg index a91b035e38..f4bfb4c698 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg index c7194e18d2..82715060a6 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 10 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg index 078e213a26..ca19b0ee14 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg index bfb4c46c46..f61b83ab7b 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg index 8dd1c17ea6..85097b4506 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 107 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature - 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg index cca98aa599..967f7c21a5 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg index 5a343d6893..9110650629 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg index e6be881341..de6356694f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg index c4342c149a..ec119cba9f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg index e3581e0823..0b4df9f3a3 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg index 4c451894bd..ad5d8c8586 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg index 65c2c9e81f..e0600e72d8 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg index 2f5cf9cfa3..5827b15cf9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg index 36d6697edb..3ee7204b92 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg index e92561350a..4834ca9eef 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg index e61775fde0..4850f68dc0 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg index 020b95dad2..ec7cbcc0fd 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg index 6688d82ec8..6f086f0605 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg index 2c8d6a82d3..ff5016d543 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg index fe012ff873..e324931269 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg index c0adce0f84..5aea3605f5 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg index 5b58c2f37b..24a1faed48 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg index f986831fd5..d73b6ac796 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg index 5d360b244b..14d3867950 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg index 3875e668f4..26e6ebc4df 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg index d4d0e1c17e..54954ff567 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg index f2bb237ea2..057fb1b8cc 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg index f6780fbded..63f71cff82 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg index 6e726932a6..afef00df11 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg index 7ef50ff5b1..7b81803b0c 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg index 4d4af1e0f7..c0ac99423d 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg index 0d88c99c85..bd0f177b1b 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg index de476e6e46..586d49b7db 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg index 3fe7ff347c..16c8c5e6aa 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg index 9dd3039b65..71a70f0849 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 260 material_print_temperature_layer_0 = 265 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg index 346f33bafb..ad26bba4cb 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg index 8571e8c4b0..e4da72d39a 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg index 4231e1b3a1..b7bebe13b7 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg index c141a0ab07..f3bc48c8c9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg index 9cd4262c55..70c2d3044c 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg index 6f49ec9e3b..d52ceb51ea 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg index 415379417c..6124b1dfed 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg index c4ce86563f..b4a8bc21f4 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg index dc4505591f..a764026ca7 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 10 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg index 224fa18cd6..11b9d689c8 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg index 44737981b0..7521ef5d62 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg index 8bf71b5cf5..6de69d4eba 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg index 3102afdc2c..e2b282ab2a 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg index ad6e361582..60d02fac6d 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg index b7445aee86..4969aad456 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg index cc849df9ba..7bf8dc30d4 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg index 10cbd3a4cf..27cef2d7c9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg index 055bbb7623..24e3a1f238 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 107 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature - 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg index 028586beb4..4211634c6d 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg index 8bc0b97bc5..bd2c12c3f1 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg index ec355cec15..589f27a221 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg index 3ab4df020c..bca586491d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 98 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg index 455cb44a7b..2e90b6fd6f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 96 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg index 3475c621c3..e2f63845ee 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg index d7d937fdef..bc9df5fa14 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 98 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg index e83067bdc8..7216eb093c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg index 188cddf0d6..a90e755a49 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg index 6127c2ec43..1d54fd6b3c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg index ca38be0476..90d3d00507 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg index caa9003cb3..ca2b4a9c9e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 101 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg index a10cbdac7d..b297719ba1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 99 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg index 85fe174e95..34882ab1af 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg index 9b48be1b8b..07969b958a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg index 0440a0a34a..ecd3384a5b 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg index 7f124ae4ec..a4a87bc3f3 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg index f662c41048..c0f93168da 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg index dae0dda098..4116205747 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg index 1079c746ec..df1fb6e2e7 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg index 04991249e9..aa5bfa30f2 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg index 685778f3f1..887a35f80e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg index ab5eca1d47..a9a4bcb18f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg index a5a2addbc6..d73114c313 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg index 6ecc9a3265..e3f0657f1f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg index 9e060959dd..542f9405b1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg index 322d30a975..43ff676c46 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg index 5ae6c32cb8..2cca8a5c45 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg index 3fbe1f6370..951e26d841 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg index 46aacdf22c..f408c5a293 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg index 6997dae536..8b72022a0d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg index 70bb7206af..2540f2bea9 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg index eb89937ded..c6bd8cc70e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg index 4bc567a2d9..02b8e45e22 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg index f08c2e68b7..26e2eb5029 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 92 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg index 4a9a1472b8..f97462d99c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg index 41edbc8e32..540e14ba23 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg index 10356ad344..af851371a1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 92 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg index 9f04791ac2..e2470b9ecf 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg index 56e09ac385..21c4f9eccc 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg index 6c8a5462aa..b210d0fd30 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg index be4a045e0d..6b6a5923ce 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg index 6b107e9c9b..f677ac9e32 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg index ca169572b9..9ed4c381c9 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg index 7e7a3ed9d1..3f928f436d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg index a08e251fe0..d8e702dc7a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg index 2bcf4d4b1d..53516d4617 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg index 1352a75a8a..e7298a71d3 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg index ad699959aa..cd9de526ec 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 105 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature - 2 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg index 6fdabc1a83..4de06235da 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg index 1954931cc7..431623b7c6 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg index 913af1994b..e0c29062d7 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg index 573834fc79..9230df64e3 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg index 3d5d1781ae..7117a889ed 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg index 4910a69272..97d2209bda 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg index 28d395019a..111504ad7b 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg index b91ceb1f85..d5322c039a 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg index 4a32ddceaf..74d0fa3869 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg index e45a8970f7..80dfbe8dbc 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg index c0a9632b95..26decee7ba 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg index bce7e2891f..850458ed36 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg index 0a053f123e..06f9ed6686 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg index 4f167ecacc..36398c0cfc 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg index 8efea7e264..8dd9bc10fb 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg index d2f6973da7..fb149908d1 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg index 57e9fc27a4..47d9a50940 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg index 2ef4a5b479..e57fefc2b9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg index a7549a851c..0cbddce4c9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg index 322f31e986..965c08e8f9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg index 6f3fa578bf..4062997ba0 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg index ee3166e7da..e6acfe27b8 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg index 05eabcc6a3..602837f410 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg index d10b2df53b..d5bb0ac8ba 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg index 181d89f957..022a6f36bf 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg index 38bd72884b..35421e68d6 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg index d8b2e660fc..65217b7ff9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg index c39338eeca..118acb433f 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg index f88eff1615..c8102ecdf9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg index 59a6db473d..df178b1807 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg index 9a94498b12..95973a4428 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg index 2611e1deba..32073574ea 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 93 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg index 35644e47a8..4b306434b9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 99 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg index a820dd8467..99a245dfb4 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 98 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg index a4f135a4fa..d7ecb95748 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg index ee58caf9e6..9a973d225d 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg @@ -27,7 +27,7 @@ material_flow = 93 material_initial_print_temperature = =default_material_print_temperature material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg index 6399e7fd1f..6ff6a8dd0e 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg index e034d49e6e..5f19e2ab77 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg index 632c45a51f..5ea81eab76 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg index e882d42015..cc5ecebffe 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg index 7b52c7bb2d..d133a60b41 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg index a0fcdc4a52..1e243bbea4 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg index 496e5fe215..54889f9923 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg index 9c676c934b..8f484b0616 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg index 0b4c3c0281..f328b88645 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 105 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg index ffbb925a22..9d11111b78 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 103 material_print_temperature = =default_material_print_temperature + 6 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg index 60af5617e3..ed25c0fb46 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 101 material_print_temperature = =default_material_print_temperature + 9 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg index 71581b46ad..0b70ff0384 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg index bcbb45062a..f519ec66d5 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg index 827ae4a7ba..83c109070a 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg index 29f88f6e15..09ffbaed98 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg index 316e5d4447..ff50fd3deb 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg index 44203ad144..fbbc7a0187 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg index e322951476..95a6d4e732 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg index b4ee9ea985..2c0caa6a06 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg index 708896fdb7..c896adef1b 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg index 63ca3d88ff..0dcc4405d7 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg index 62ed1914db..73dce76c2e 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg index ac9ec6324e..36902a619f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg index b225d8a911..b0bc012110 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg index 6e859c8dd0..baf4211645 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg index 6b8ebd9d20..754d20c802 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg index f168d4cf46..717aed8e49 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg index 652876d6b2..d41dea9d7b 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg index 482b99c2f6..b708481aeb 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg index 551e79a8e4..5e604e6f65 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg index 5709736147..31f7a30f3f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg index 38f3b2b2ef..f35389424c 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg index 54a6d54cc0..902e42aef1 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg index abdd37d98d..f1fc4dd877 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg index 50f3b04e16..03c73269f8 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg index 35e9d19957..ddf8abc4c1 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg index 6e59384a4d..77eb559e6e 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg index 9df5f69d75..5053e91cbb 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg index 45b5a9e415..0e658a7bd2 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg index 70ec1234ff..f30a55729c 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg index 6327502027..eca2362651 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg index d7056a3f11..ec460ac49e 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg index a5ec67621f..1e85473f67 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg index 4ddc98ddd2..9650dac1c0 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg index 1b3a77ab8b..38cf5927f0 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg index be45c084a5..60baaa1038 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg index c02401c4d5..385d21e44d 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg index ba91c749d5..ef7573779d 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg index b1d4c72a34..86e4022a27 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 102 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg index 4fac7e687d..aa2af46845 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 101 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg index 91b4699598..915523eadf 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg index 8d84bc4fd5..d258496552 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg index eafe3eef80..93420a5103 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg index 3286e7fb08..41764726df 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg index bb164bcd99..2e4bb516b0 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg index 82ad174a95..700c0102c2 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg index f33abf1ec3..941f0a6c81 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg index 2edb0e32f8..4cd7728a69 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 102 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg index 30d7139eb9..01b584afcd 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 101 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg index 1bf36453d1..a4c6fd4046 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg index f413dd3e17..376c9b1d51 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg index 9b228f7b05..5e27fec150 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg index 68c8604a95..5ca32bd655 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg index 66fc7c2f92..bdebb9a0ac 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg index aceba867c2..01c65f4586 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg index a34c3a4d45..9a8aaeb18e 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg index bd41a808d0..ba4d2b22ec 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg index 6036150353..2b1b5fb2f9 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg index c150380c74..6e05ba15a6 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 107 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg index 74ce8559d2..56765cb156 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 105 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg index f59b68f675..36d6248682 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg index 689c1fe076..d88ff841d0 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg index 514cdcbfde..9bb1258fc8 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg index 123dc9a953..7a662ec6d1 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg index 9c3f620a2d..767b72a566 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg index 0b841dfb09..da088dc345 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg index adfe816125..1ae6c25ebb 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg index 4b6108e51d..a9eb8331c8 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg index 99af35534f..03cb145944 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg index 21043cae58..ac77c87265 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg index ac5f3e5bee..538bcfedb9 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg @@ -22,8 +22,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_min_travel = 2 skirt_gap = 2 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg index eca85becc6..86c4cd1894 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg index 8071d7193e..83ec574663 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg index 8354fba5e0..2269a480a5 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg index 074632abda..4fed169568 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index eeb924906f..632a1fb46d 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index a64c8298a2..0667ef961d 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 16be0db845..d93ba61d9d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 916b283c9c..b92a826f5a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 5dcbe80bbb..2fe35f1a2e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = False +prime_tower_mode = none speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index 1420880995..fcecc2701b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = False +prime_tower_mode = none speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index e0dd43cc28..cf417a84b6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' skin_overlap = 20 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index 16ece7c2dd..363a43975e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index ca7fd8cbf3..92dae4a19f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' skin_overlap = 10 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 5de59e58c9..2540a78b21 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 layer_height = 0.2 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index b2020831d7..37e8df992d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 layer_height = 0.15 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 4be3a9c13a..5ba84b0564 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 2e24f485d0..0fb115b548 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 28e8ccbf75..d0d447acdf 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 5113277ab2..e55a49baba 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 636ce41e71..ee55427cf7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index a7c533bfea..15410514cd 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 1d44e48193..a79b715ee0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 6b99ed5a70..a838352f48 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index 97be45babc..e5a10d9222 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index f305caa82d..486b74c1b2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index c82043d3af..4293ca81f1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_amount = 6.5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 74a628f7cb..1b396f5417 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index fa9b4c54ea..6c4ee71b82 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index cffd1e6075..d8fca155d3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index 94fe824f5e..5ea9fe9336 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 05a6896646..4e03569ca6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index dcca81f3ef..0443afa3f6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 585ae8eefe..ccae2cc5d8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 2280a837ae..9596b00d33 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index b1f867807b..4a7e29ec36 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index a75ae74ada..5c5b732990 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 15 layer_height = 0.4 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index c1544a00e2..9a48e11a7b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 15 layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index a0fc036566..747730c0a7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 547ab013fb..40f0779369 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index b17789ad0f..03116ec10d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg index 3eafff9a07..aab2e25ac2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing = all speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index fe36a86948..45ec96e089 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 layer_height = 0.4 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing = all speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg index 2bba762e2d..ee92c6add7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 layer_height = 0.3 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing = all speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 57a830402a..84a9b9a5fb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 40f710327f..ae59471ff3 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 702c64bb78..2a4c093dca 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.3 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 145389fbe4..c9e31486c0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 68d54bd406..e821581360 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 2aa79cad79..a5817651d8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,9 +17,9 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index a9b7a92918..5e0816ef9a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 support_angle = 70 top_bottom_thickness = =layer_height * 6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 16e17c500e..36e25d258a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 96dec4f1c5..ffbc413b6e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 35) speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 859eb3b33a..d8f7812d75 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -23,8 +23,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 61ace7da80..a689035132 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -23,8 +23,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index e45b8f2d1d..f4b61cac5d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -24,8 +24,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index eab1a39931..64ad8ff7f3 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skin_overlap = 20 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index ad1e26c7da..2cdc81a5d9 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skin_overlap = 15 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index e5ae49b17d..fa2b7026a1 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_infill_sparse_thickness = =3*layer_height diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index 38334b4358..d16740c8ef 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_infill_sparse_thickness = =2*layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg index 369cbcd563..acad5a484b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg index 6485844da8..262e4f4b54 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg index 6877d9b6a2..ad25724904 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg index de1905e410..c0890c9740 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg index ae5c9bcbc1..fbe263ab43 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg index 701a2db84d..059d39f6c1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg index 684336d1eb..cb741764d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 7 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg index a7a17e5f69..3af6b9a69d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg index a3b8129ed7..1526b46ba5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg index 5c051039d0..999e2ce9c9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg index 61073067fc..42b98f5be7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg index 880461bccf..864421ed78 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg index 5dd5e61f82..2591f15abb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg index 7617b35b3b..ab0354f9ea 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg index 7ed1fcd298..7ac2d06998 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg index c9eebee8a0..9968edc74c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg index bcd04f4b24..0138115976 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg index 278e502231..f2a006ce6c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg index 1baf43933c..0e72f56e02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg index 4b8f9f433b..d313f08887 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg index 5581284de4..73105ed512 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg index 30af138465..b6eac28eb9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg index e5dc960d98..7ee4df3cac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg index 719adc820b..80a564e05a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg index 3b106196f2..775e8420df 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg index 455338a901..f8448e868b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg index b1f5e1f19a..e561a64075 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg index b5253cb077..26cce4fcad 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg index 69cf85f349..86d98cfd6c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg index 397992c551..2715630b07 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg index 773da6d3ac..8446a7957f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg index 10e43b5699..8e4d4596af 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg index de5e0faf2e..95f9c84609 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg index c39c6d42c8..447b6dfee5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg index 08bb2befdf..49a6120c8f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg index 89b8386d2f..2f595d38d0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg index cc0da1a253..5aa2ff791b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg index d4431382dd..170e2199be 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg index c304f13e34..aae7ff42a2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg index 854b868259..96c3513a97 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg index 9678ba9523..3a87267e37 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg index c53596bc9f..17dd161346 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg index 58a8a1ebb0..70b9a95dd4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg index 2870c09199..564b251c4b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg index 6f450463b9..5d27f8e05e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg index e193aa51c3..b1ac45f1b0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg index 622f2030e4..6201f53938 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg index 09f02aa375..4c9e939ccc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg index 3b82ebfac7..dc07130b6c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg index 2fd9e5ef2c..cbaf3cd89a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg index c2d04c9bad..ff96a0df68 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg index caf16e5f94..a3d9b394b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg index 1cd46fab48..dc46682c39 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg index f9ee324f33..f2ea43800e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg index f883fe1998..58193faaaf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg index a5c059c5e6..7e58326c02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg index e7d656dcc4..5b33c9854f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg index 08c1f4933b..6ac1edf4e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg index c4d2894885..536a00cc00 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg index d901c6c0dd..539a8c5a7c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg index 0279882346..bf92354310 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg index 373d6a0b78..138369ef63 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg index 1feae070fc..a3935c55f7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg index f93f0848db..9f7162abe0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg index 67f9cdfcf0..997095fcbf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index 7619fcf43d..2ec19359cf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index b157ed198c..6726d34585 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index 550a26c7f8..0bf76412b2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg index 1f706632ce..a59a80d04a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg index b1437e9160..c840722681 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg index 7c3c4ff6e9..1865589991 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 5d6ce58f7c..437fc03997 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 1b69ada75d..05401c0d34 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index d678d7e178..a77cde65e6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg index 9d7b4455d6..79f23f9c2c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg index e2a5c54c66..a187dc3179 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg index 26d3dc7fb8..cc2c57bcff 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg index b1dae1cb7a..9649f71775 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg index 4d4ffa0059..a0d9dbdee7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg index 5cc6a43e13..840008f60d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg index 59f8409483..c0719e38b3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg index a4cdd898f1..8f045a1238 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg index 79dc105f86..b1e8b913fd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg index a76864a1a3..176cfb2cb2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg index d364232726..404435e21b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg index 02a71fa9b7..76724ad958 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg index 12b815d5ab..b69ddd1011 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =3 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg index 5390b3ecb7..67a101d2bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg index b15b5958a7..66c0486b0f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg index e273e85eb5..6e36d9578f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg index ea2902cd6c..9b81b09599 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg index bbbad9be1f..e596c6fcd0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg index 300e2ebaed..5c9671c99e 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg index 84040ede4e..872368142c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg index 402ae15eba..2b76474e5f 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg index 0c9154a233..dc84108298 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg index e7b72d6cd0..3706d83424 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg index 38c857de5e..6e03ebd7e5 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg index eef6e66a5e..dc6dc3906d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg index 56689c4bfa..69a5af3102 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg index 573b758705..f96f28e71f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg index 926ef49922..9cc0a12b5a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg index 598e83d922..651c780d32 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg index 5f5e9e2fd3..28bd4cddff 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg index 8656a28067..49e70ecb1c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 7 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg index a4381e0e3b..b2dd10f321 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg index 5f4c480fa4..ba704aa34b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg index 9e3c0153b1..ccccb2d3e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg index bd4e13ebaf..cc6e8f9453 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg index a77d1b4233..0b11bc463b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg index 805fb08ead..476cdad5ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg index 77f775d672..6a18d6a859 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg index 877c48c42d..dcd01b1084 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg index c58107dcf9..c2d943bb77 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg index b210b894e5..30b1896528 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg index aa17d35a97..aa58bd07b3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg index 616443b129..e74d6a6532 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg index f34549bc78..e724f809d5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg index 4a9e914b99..2cce79480c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg index dc73f13bb5..5a730aba3a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg index ead512bb50..a1bde9d68d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg index c6641e7a08..e0070ff73b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg index 8eb0d257d6..0f06f432d4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg index bd4dd317bb..68aeea4c25 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg index 1e5ea9efb6..2f7a70bfa0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg index cf7a8335b8..2bf08e3489 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg index a7dcb61128..3b44a9eb37 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg index f053b33478..3167f39563 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg index 4e98b6005a..238468f784 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg index 5c6ed28548..208277dc9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg index c0b4799ca9..e7d58a1001 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg index d430f867d8..20e10b3e78 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg index b2c25e26c7..fe37499b76 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg index 15b87d8229..5f85f0b6d1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg index 9a10024813..7d9bd13d07 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg index 5d14f014b9..4673f7dddc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg index 4e1b0f535f..7ffa9aa60a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg index ab66eed0ab..5cf1740ad1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg index 2b192e8c1c..cc05029e74 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg index 11301a2990..a7bebed472 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg index 28cf131812..4ca8ccaa86 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg index a01b433eb2..c1ea2d98dd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg index f368ac13d8..597bf3b302 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg index b699ebc9f3..81f4e207be 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg index d0ee391c65..a38a73679d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg index 9869a18bb3..f045d5425d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg index fc8507c42b..79e8161047 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg index 0dd369e4dd..a7877d90e1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg index e6ce183f4a..2b5b521f02 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg index 0c3abc6e3f..ff9a049f7e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg index eb6e07e080..a3340f81a8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg index e7958d9841..7c80d16f24 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg index 0683b2959b..18ec3e9dbe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg index 5a774e0750..798db0dfc8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg index bed4ac46d7..86d6130a70 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg index a0d58757da..2d9c3ebabe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg index 6208ad9bec..7f51af7154 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg index 98b0d3f5f8..81d08397f3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg index 156113b809..689455183f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg index 10bf06fbb5..d00e5235ba 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg index 1a63005ced..a22439011e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg index 5e22cee246..7a97620cb4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index c338c4b7ff..355e3afa78 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index 62d9eb235d..e89b5d717b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index b2792b6fee..542ba0bb5b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg index 26c20268ea..1c5161a635 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg index cc28dc5150..0a4c4ad2c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg index eb338d1e1d..2fc8aaf746 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 2491d0ed88..3deb8f57a0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index e975175ce0..fd30dfc228 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index 5334fac1f0..2f21317657 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_enable = True prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg index 9ba4a38c6e..e308015dd8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg index 4ab74980ef..3d7cabe23d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg index 269d51dd4b..f7ab03fac0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg index 4f56167ffd..692f4f8aa7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg index 9fdf9a665b..93e4e071f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg index 3368ae6e2d..592c835689 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg index ca93df9dc1..fd0b6da130 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg index 4461ae0772..a6b7ac0439 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg index 1acdad53a0..c873edfacb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg index 4973ec35bb..413903a8e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg index 2bcf3fa82d..f0c5169389 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg index 3e4693c115..cb12b8740c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg index 2bc28f4c1a..022e91ed9f 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg index f5b8c35298..40cf72eff4 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg index 6457f97c9c..8b5a3e9f67 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg index eef90f5f17..1ff95a0e3b 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg index e1862ce3c4..58796a07a4 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg index 8b807c1eb5..b7d9b2a05f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg index ebc58413e2..e3e8d486b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg index 1204be4c15..f01921353b 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg index 6a7d52af4b..0a1cc1204d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg index 40d414cbcb..4437f2c531 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg index 6144a2c3f0..3796177bc5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg index 5bf5d910e8..1ec4911676 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg index 21407b6e66..36b56b6513 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/setting_visibility/advanced.cfg b/resources/setting_visibility/advanced.cfg index cd501267d0..57698bf252 100644 --- a/resources/setting_visibility/advanced.cfg +++ b/resources/setting_visibility/advanced.cfg @@ -127,7 +127,7 @@ brim_line_count brim_outside_only [dual] -prime_tower_enable +prime_tower_mode prime_tower_position_x prime_tower_position_y prime_tower_brim_enable diff --git a/resources/setting_visibility/basic.cfg b/resources/setting_visibility/basic.cfg index 0193eb26ba..f5552f3cd8 100644 --- a/resources/setting_visibility/basic.cfg +++ b/resources/setting_visibility/basic.cfg @@ -53,7 +53,7 @@ adhesion_type adhesion_extruder_nr [dual] -prime_tower_enable +prime_tower_mode prime_tower_position_x prime_tower_position_y diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index 01861c39ff..0a07fff449 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -356,7 +356,7 @@ raft_fan_speed raft_is_shrink_plate [dual] -prime_tower_enable +prime_tower_mode prime_tower_size prime_tower_min_volume prime_tower_position_x @@ -367,6 +367,7 @@ prime_tower_base_size prime_tower_base_height prime_tower_base_curve_magnitude prime_tower_raft_base_line_spacing +prime_tower_max_bridging_distance ooze_shield_enabled ooze_shield_angle ooze_shield_dist diff --git a/resources/variants/liquid/liquid_vo08.inst.cfg b/resources/variants/liquid/liquid_vo08.inst.cfg index 58cbea1b9d..a69a0f806e 100644 --- a/resources/variants/liquid/liquid_vo08.inst.cfg +++ b/resources/variants/liquid/liquid_vo08.inst.cfg @@ -37,7 +37,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True retract_at_layer_change = =not magic_spiralize retraction_amount = 3 diff --git a/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg b/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg index 4bf51a967a..b66b984346 100644 --- a/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.3 machine_nozzle_id = HT0.4 machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 1.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False support_angle = 45 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg index 3d705453d8..968c7c7262 100644 --- a/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.3 machine_nozzle_id = Standard 0.4 machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 1.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False support_angle = 60 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg index 3443f64531..9b6d921d70 100644 --- a/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.4 machine_nozzle_id = Standard 0.6 machine_nozzle_size = 0.6 machine_nozzle_tip_outer_diameter = 1.5 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False support_angle = 55 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg index f436ce1fe7..11ff582ef1 100644 --- a/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.5 machine_nozzle_id = Standard 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg index b957d58d9f..c9d50d91c3 100644 --- a/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.6 machine_nozzle_id = Standard 1.0 Experimental machine_nozzle_size = 1.0 machine_nozzle_tip_outer_diameter = 2.5 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg index 3a35f9c4a2..f1f03bfcb4 100644 --- a/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.7 machine_nozzle_id = Standard 1.2 Experimental machine_nozzle_size = 1.2 machine_nozzle_tip_outer_diameter = 3.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 4190aab0cd..baf5f4043a 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 62227f50f6..5250dff5e9 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 941634e3a6..109cd55a9d 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 2a88f165e6..c40c69ff62 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index e7d3487503..5385e5e540 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index d0f78ac3bd..56b1ea9af7 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 04a3a97d11..4bb5eda5db 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 07b556d206..b833c4bcf3 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s7_aa0.8.inst.cfg b/resources/variants/ultimaker_s7_aa0.8.inst.cfg index b3253f7d25..1feea8c676 100644 --- a/resources/variants/ultimaker_s7_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s7_bb0.8.inst.cfg b/resources/variants/ultimaker_s7_bb0.8.inst.cfg index 010d5c7cf1..17a9971002 100644 --- a/resources/variants/ultimaker_s7_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 4.5