From 33e3dea2130bd765442015540e921bdb488bee2e Mon Sep 17 00:00:00 2001
From: probonopd <probonopd@users.noreply.github.com>
Date: Sun, 15 Jan 2017 03:41:07 +0100
Subject: [PATCH] Create renkforce_rf100.def.json

---
 .../definitions/renkforce_rf100.def.json      | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 resources/definitions/renkforce_rf100.def.json

diff --git a/resources/definitions/renkforce_rf100.def.json b/resources/definitions/renkforce_rf100.def.json
new file mode 100644
index 0000000000..8e7086836a
--- /dev/null
+++ b/resources/definitions/renkforce_rf100.def.json
@@ -0,0 +1,87 @@
+{
+    "id": "RF100",
+    "version": 2,
+    "name": "Renkforce RF100",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "author": "Simon Peter (based on RF100.ini by Conrad Electronic SE)",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "manufacturer": "Renkforce",
+        "platform_offset": [0, 0, 0],
+        "visible": true
+    },
+
+    "overrides": {
+        "adhesion_type": {
+            "default_value": "skirt"
+        },
+        "bottom_thickness": {
+            "default_value": 0
+        },
+        "infill_sparse_density": {
+            "default_value": 15
+        },
+        "machine_depth": {
+            "default_value": 100
+        },
+        "machine_end_gcode": {
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_height": {
+            "default_value": 100
+        },
+        "machine_name": {
+            "default_value": "Renkforce RF100"
+        },
+        "machine_start_gcode": {
+            "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing..."
+        },
+        "machine_width": {
+            "default_value": 100
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "retraction_amount": {
+            "default_value": 2
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "speed_topbottom": {
+            "default_value": 30
+        },
+        "speed_travel": {
+            "default_value": 50
+        },
+        "speed_wall_0": {
+            "default_value": 25
+        },
+        "speed_wall_x": {
+            "default_value": 35
+        },
+        "support_xy_distance": {
+            "default_value": 0
+        },
+        "support_z_distance": {
+            "default_value": 0.1
+        },
+        "top_thickness": {
+            "default_value": 0.5
+        }
+    },
+
+    "categories": {
+        "material": {
+            "settings": {
+                "material_bed_temperature": {
+                    "visible": false
+                }
+            }
+        }
+    }
+}