diff --git a/resources/i18n/cs_CZ/cura.po b/resources/i18n/cs_CZ/cura.po index cfe7c3b0a6..f20c8c2949 100644 --- a/resources/i18n/cs_CZ/cura.po +++ b/resources/i18n/cs_CZ/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2023-02-16 20:28+0100\n" "Last-Translator: Miroslav Šustek \n" "Language-Team: DenyCZ \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Nelze přečíst odpověď." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "Poskytnutý stav není správný." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Vypršel časový limit při autentizaci se serverem s účty." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Při autorizaci této aplikace zadejte požadovaná oprávnění." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Při pokusu o přihlášení se stalo něco neočekávaného, zkuste to znovu." @@ -6716,22 +6716,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Přidat tiskárnu manuálně" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Výrobce" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Autor profilu" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Název tiskárny" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Pojmenujte prosím svou tiskárnu" diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot index 033fdf015a..9321ffa72b 100644 --- a/resources/i18n/cura.pot +++ b/resources/i18n/cura.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -426,22 +426,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" @@ -6019,22 +6019,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "" @@ -6244,224 +6244,14 @@ msgstr "" msgctxt "@label" msgid "No items to select from" msgstr "" -#: plugins/3MFReader/plugin.json +#: plugins/LegacyProfileReader/plugin.json msgctxt "description" -msgid "Provides support for reading 3MF files." +msgid "Provides support for importing profiles from legacy Cura versions." msgstr "" -#: plugins/3MFReader/plugin.json +#: plugins/LegacyProfileReader/plugin.json msgctxt "name" -msgid "3MF Reader" -msgstr "" - -#: plugins/PostProcessingPlugin/plugin.json -msgctxt "description" -msgid "Extension that allows for user created scripts for post processing" -msgstr "" - -#: plugins/PostProcessingPlugin/plugin.json -msgctxt "name" -msgid "Post Processing" -msgstr "" - -#: plugins/CuraDrive/plugin.json -msgctxt "description" -msgid "Backup and restore your configuration." -msgstr "" - -#: plugins/CuraDrive/plugin.json -msgctxt "name" -msgid "Cura Backups" -msgstr "" - -#: plugins/DigitalLibrary/plugin.json -msgctxt "description" -msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." -msgstr "" - -#: plugins/DigitalLibrary/plugin.json -msgctxt "name" -msgid "Ultimaker Digital Library" -msgstr "" - -#: plugins/FirmwareUpdateChecker/plugin.json -msgctxt "description" -msgid "Checks for firmware updates." -msgstr "" - -#: plugins/FirmwareUpdateChecker/plugin.json -msgctxt "name" -msgid "Firmware Update Checker" -msgstr "" - -#: plugins/MachineSettingsAction/plugin.json -msgctxt "description" -msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." -msgstr "" - -#: plugins/MachineSettingsAction/plugin.json -msgctxt "name" -msgid "Machine Settings Action" -msgstr "" - -#: plugins/ImageReader/plugin.json -msgctxt "description" -msgid "Enables ability to generate printable geometry from 2D image files." -msgstr "" - -#: plugins/ImageReader/plugin.json -msgctxt "name" -msgid "Image Reader" -msgstr "" - -#: plugins/Marketplace/plugin.json -msgctxt "description" -msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website." -msgstr "" - -#: plugins/Marketplace/plugin.json -msgctxt "name" -msgid "Marketplace" -msgstr "" - -#: plugins/SimulationView/plugin.json -msgctxt "description" -msgid "Provides the preview of sliced layerdata." -msgstr "" - -#: plugins/SimulationView/plugin.json -msgctxt "name" -msgid "Simulation View" -msgstr "" - -#: plugins/XmlMaterialProfile/plugin.json -msgctxt "description" -msgid "Provides capabilities to read and write XML-based material profiles." -msgstr "" - -#: plugins/XmlMaterialProfile/plugin.json -msgctxt "name" -msgid "Material Profiles" -msgstr "" - -#: plugins/FirmwareUpdater/plugin.json -msgctxt "description" -msgid "Provides a machine actions for updating firmware." -msgstr "" - -#: plugins/FirmwareUpdater/plugin.json -msgctxt "name" -msgid "Firmware Updater" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.13 to 5.0" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.4 to 4.5" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json -msgctxt "name" -msgid "Version Upgrade 3.2 to 3.3" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.2 to 4.3" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json -msgctxt "name" -msgid "Version Upgrade 3.5 to 4.0" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.6.0 to 4.6.2" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.11 to 4.12" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.9 to 4.10" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json -msgctxt "name" -msgid "Version Upgrade 2.6 to 2.7" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.1 to 4.2" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json -msgctxt "name" -msgid "Version Upgrade 3.4 to 3.5" +msgid "Legacy Cura Profile Reader" msgstr "" #: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json @@ -6474,94 +6264,34 @@ msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." +msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "name" -msgid "Version Upgrade 4.6.2 to 4.7" +msgid "Version Upgrade 4.11 to 4.12" msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." +msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" -msgid "Version Upgrade 4.7 to 4.8" +msgid "Version Upgrade 4.1 to 4.2" msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." +msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" -msgid "Version Upgrade 2.5 to 2.6" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.8 to 4.9" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.0 to 4.1" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json -msgctxt "name" -msgid "Version Upgrade 3.0 to 3.1" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 5.2 to Cura 5.3." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json -msgctxt "name" -msgid "Version Upgrade 5.2 to 5.3" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json -msgctxt "name" -msgid "Version Upgrade 2.1 to 2.2" -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json -msgctxt "description" -msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." -msgstr "" - -#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json -msgctxt "name" -msgid "Version Upgrade 4.5 to 4.6" +msgid "Version Upgrade 3.5 to 4.0" msgstr "" #: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json @@ -6574,14 +6304,44 @@ msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" -msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." +msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "" -#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" -msgid "Version Upgrade 4.3 to 4.4" +msgid "Version Upgrade 4.4 to 4.5" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json +msgctxt "name" +msgid "Version Upgrade 3.0 to 3.1" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json +msgctxt "name" +msgid "Version Upgrade 2.1 to 2.2" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.13 to 5.0" msgstr "" #: plugins/VersionUpgrade/VersionUpgrade53to54/plugin.json @@ -6594,6 +6354,116 @@ msgctxt "name" msgid "Version Upgrade 5.3 to 5.4" msgstr "" +#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json +msgctxt "name" +msgid "Version Upgrade 3.2 to 3.3" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.0 to 4.1" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.2 to 4.3" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.7 to 4.8" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json +msgctxt "name" +msgid "Version Upgrade 3.4 to 3.5" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.8 to 4.9" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.3 to 4.4" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json +msgctxt "name" +msgid "Version Upgrade 2.5 to 2.6" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.6.2 to 4.7" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json +msgctxt "name" +msgid "Version Upgrade 2.6 to 2.7" +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json +msgctxt "description" +msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." +msgstr "" + +#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json +msgctxt "name" +msgid "Version Upgrade 4.5 to 4.6" +msgstr "" + #: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." @@ -6604,104 +6474,94 @@ msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "" -#: plugins/X3DReader/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json msgctxt "description" -msgid "Provides support for reading X3D files." +msgid "Upgrades configurations from Cura 5.2 to Cura 5.3." msgstr "" -#: plugins/X3DReader/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json msgctxt "name" -msgid "X3D Reader" +msgid "Version Upgrade 5.2 to 5.3" msgstr "" -#: plugins/RemovableDriveOutputDevice/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" -msgid "Provides removable drive hotplugging and writing support." +msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "" -#: plugins/RemovableDriveOutputDevice/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" -msgid "Removable Drive Output Device Plugin" +msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "" -#: plugins/MonitorStage/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" -msgid "Provides a monitor stage in Cura." +msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "" -#: plugins/MonitorStage/plugin.json +#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" -msgid "Monitor Stage" +msgid "Version Upgrade 4.9 to 4.10" msgstr "" -#: plugins/SupportEraser/plugin.json +#: plugins/CuraProfileWriter/plugin.json msgctxt "description" -msgid "Creates an eraser mesh to block the printing of support in certain places" +msgid "Provides support for exporting Cura profiles." msgstr "" -#: plugins/SupportEraser/plugin.json +#: plugins/CuraProfileWriter/plugin.json msgctxt "name" -msgid "Support Eraser" +msgid "Cura Profile Writer" msgstr "" -#: plugins/PreviewStage/plugin.json +#: plugins/FirmwareUpdateChecker/plugin.json msgctxt "description" -msgid "Provides a preview stage in Cura." +msgid "Checks for firmware updates." msgstr "" -#: plugins/PreviewStage/plugin.json +#: plugins/FirmwareUpdateChecker/plugin.json msgctxt "name" -msgid "Preview Stage" +msgid "Firmware Update Checker" msgstr "" -#: plugins/GCodeReader/plugin.json +#: plugins/PostProcessingPlugin/plugin.json msgctxt "description" -msgid "Allows loading and displaying G-code files." +msgid "Extension that allows for user created scripts for post processing" msgstr "" -#: plugins/GCodeReader/plugin.json +#: plugins/PostProcessingPlugin/plugin.json msgctxt "name" -msgid "G-code Reader" +msgid "Post Processing" msgstr "" -#: plugins/3MFWriter/plugin.json +#: plugins/USBPrinting/plugin.json msgctxt "description" -msgid "Provides support for writing 3MF files." +msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "" -#: plugins/3MFWriter/plugin.json +#: plugins/USBPrinting/plugin.json msgctxt "name" -msgid "3MF Writer" +msgid "USB printing" msgstr "" -#: plugins/GCodeGzReader/plugin.json +#: plugins/CuraDrive/plugin.json msgctxt "description" -msgid "Reads g-code from a compressed archive." +msgid "Backup and restore your configuration." msgstr "" -#: plugins/GCodeGzReader/plugin.json +#: plugins/CuraDrive/plugin.json msgctxt "name" -msgid "Compressed G-code Reader" +msgid "Cura Backups" msgstr "" -#: plugins/UM3NetworkPrinting/plugin.json +#: plugins/GCodeGzWriter/plugin.json msgctxt "description" -msgid "Manages network connections to UltiMaker networked printers." +msgid "Writes g-code to a compressed archive." msgstr "" -#: plugins/UM3NetworkPrinting/plugin.json +#: plugins/GCodeGzWriter/plugin.json msgctxt "name" -msgid "UltiMaker Network Connection" -msgstr "" - -#: plugins/GCodeProfileReader/plugin.json -msgctxt "description" -msgid "Provides support for importing profiles from g-code files." -msgstr "" - -#: plugins/GCodeProfileReader/plugin.json -msgctxt "name" -msgid "G-code Profile Reader" +msgid "Compressed G-code Writer" msgstr "" #: plugins/GCodeWriter/plugin.json @@ -6714,34 +6574,84 @@ msgctxt "name" msgid "G-code Writer" msgstr "" -#: plugins/UFPReader/plugin.json +#: plugins/3MFWriter/plugin.json msgctxt "description" -msgid "Provides support for reading Ultimaker Format Packages." +msgid "Provides support for writing 3MF files." msgstr "" -#: plugins/UFPReader/plugin.json +#: plugins/3MFWriter/plugin.json msgctxt "name" -msgid "UFP Reader" +msgid "3MF Writer" msgstr "" -#: plugins/SliceInfoPlugin/plugin.json +#: plugins/ModelChecker/plugin.json msgctxt "description" -msgid "Submits anonymous slice info. Can be disabled through preferences." +msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "" -#: plugins/SliceInfoPlugin/plugin.json +#: plugins/ModelChecker/plugin.json msgctxt "name" -msgid "Slice info" +msgid "Model Checker" msgstr "" -#: plugins/CuraProfileReader/plugin.json +#: plugins/GCodeReader/plugin.json msgctxt "description" -msgid "Provides support for importing Cura profiles." +msgid "Allows loading and displaying G-code files." msgstr "" -#: plugins/CuraProfileReader/plugin.json +#: plugins/GCodeReader/plugin.json msgctxt "name" -msgid "Cura Profile Reader" +msgid "G-code Reader" +msgstr "" + +#: plugins/GCodeGzReader/plugin.json +msgctxt "description" +msgid "Reads g-code from a compressed archive." +msgstr "" + +#: plugins/GCodeGzReader/plugin.json +msgctxt "name" +msgid "Compressed G-code Reader" +msgstr "" + +#: plugins/DigitalLibrary/plugin.json +msgctxt "description" +msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." +msgstr "" + +#: plugins/DigitalLibrary/plugin.json +msgctxt "name" +msgid "Ultimaker Digital Library" +msgstr "" + +#: plugins/SupportEraser/plugin.json +msgctxt "description" +msgid "Creates an eraser mesh to block the printing of support in certain places" +msgstr "" + +#: plugins/SupportEraser/plugin.json +msgctxt "name" +msgid "Support Eraser" +msgstr "" + +#: plugins/RemovableDriveOutputDevice/plugin.json +msgctxt "description" +msgid "Provides removable drive hotplugging and writing support." +msgstr "" + +#: plugins/RemovableDriveOutputDevice/plugin.json +msgctxt "name" +msgid "Removable Drive Output Device Plugin" +msgstr "" + +#: plugins/SolidView/plugin.json +msgctxt "description" +msgid "Provides a normal solid mesh view." +msgstr "" + +#: plugins/SolidView/plugin.json +msgctxt "name" +msgid "Solid View" msgstr "" #: plugins/SentryLogger/plugin.json @@ -6754,14 +6664,144 @@ msgctxt "name" msgid "Sentry Logger" msgstr "" -#: plugins/GCodeGzWriter/plugin.json +#: plugins/PerObjectSettingsTool/plugin.json msgctxt "description" -msgid "Writes g-code to a compressed archive." +msgid "Provides the Per Model Settings." msgstr "" -#: plugins/GCodeGzWriter/plugin.json +#: plugins/PerObjectSettingsTool/plugin.json msgctxt "name" -msgid "Compressed G-code Writer" +msgid "Per Model Settings Tool" +msgstr "" + +#: plugins/3MFReader/plugin.json +msgctxt "description" +msgid "Provides support for reading 3MF files." +msgstr "" + +#: plugins/3MFReader/plugin.json +msgctxt "name" +msgid "3MF Reader" +msgstr "" + +#: plugins/AMFReader/plugin.json +msgctxt "description" +msgid "Provides support for reading AMF files." +msgstr "" + +#: plugins/AMFReader/plugin.json +msgctxt "name" +msgid "AMF Reader" +msgstr "" + +#: plugins/X3DReader/plugin.json +msgctxt "description" +msgid "Provides support for reading X3D files." +msgstr "" + +#: plugins/X3DReader/plugin.json +msgctxt "name" +msgid "X3D Reader" +msgstr "" + +#: plugins/SimulationView/plugin.json +msgctxt "description" +msgid "Provides the preview of sliced layerdata." +msgstr "" + +#: plugins/SimulationView/plugin.json +msgctxt "name" +msgid "Simulation View" +msgstr "" + +#: plugins/TrimeshReader/plugin.json +msgctxt "description" +msgid "Provides support for reading model files." +msgstr "" + +#: plugins/TrimeshReader/plugin.json +msgctxt "name" +msgid "Trimesh Reader" +msgstr "" + +#: plugins/CuraEngineBackend/plugin.json +msgctxt "description" +msgid "Provides the link to the CuraEngine slicing backend." +msgstr "" + +#: plugins/CuraEngineBackend/plugin.json +msgctxt "name" +msgid "CuraEngine Backend" +msgstr "" + +#: plugins/ImageReader/plugin.json +msgctxt "description" +msgid "Enables ability to generate printable geometry from 2D image files." +msgstr "" + +#: plugins/ImageReader/plugin.json +msgctxt "name" +msgid "Image Reader" +msgstr "" + +#: plugins/GCodeProfileReader/plugin.json +msgctxt "description" +msgid "Provides support for importing profiles from g-code files." +msgstr "" + +#: plugins/GCodeProfileReader/plugin.json +msgctxt "name" +msgid "G-code Profile Reader" +msgstr "" + +#: plugins/XmlMaterialProfile/plugin.json +msgctxt "description" +msgid "Provides capabilities to read and write XML-based material profiles." +msgstr "" + +#: plugins/XmlMaterialProfile/plugin.json +msgctxt "name" +msgid "Material Profiles" +msgstr "" + +#: plugins/MonitorStage/plugin.json +msgctxt "description" +msgid "Provides a monitor stage in Cura." +msgstr "" + +#: plugins/MonitorStage/plugin.json +msgctxt "name" +msgid "Monitor Stage" +msgstr "" + +#: plugins/CuraProfileReader/plugin.json +msgctxt "description" +msgid "Provides support for importing Cura profiles." +msgstr "" + +#: plugins/CuraProfileReader/plugin.json +msgctxt "name" +msgid "Cura Profile Reader" +msgstr "" + +#: plugins/UM3NetworkPrinting/plugin.json +msgctxt "description" +msgid "Manages network connections to UltiMaker networked printers." +msgstr "" + +#: plugins/UM3NetworkPrinting/plugin.json +msgctxt "name" +msgid "UltiMaker Network Connection" +msgstr "" + +#: plugins/PrepareStage/plugin.json +msgctxt "description" +msgid "Provides a prepare stage in Cura." +msgstr "" + +#: plugins/PrepareStage/plugin.json +msgctxt "name" +msgid "Prepare Stage" msgstr "" #: plugins/UFPWriter/plugin.json @@ -6784,104 +6824,14 @@ msgctxt "name" msgid "UltiMaker machine actions" msgstr "" -#: plugins/AMFReader/plugin.json +#: plugins/UFPReader/plugin.json msgctxt "description" -msgid "Provides support for reading AMF files." +msgid "Provides support for reading Ultimaker Format Packages." msgstr "" -#: plugins/AMFReader/plugin.json +#: plugins/UFPReader/plugin.json msgctxt "name" -msgid "AMF Reader" -msgstr "" - -#: plugins/USBPrinting/plugin.json -msgctxt "description" -msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." -msgstr "" - -#: plugins/USBPrinting/plugin.json -msgctxt "name" -msgid "USB printing" -msgstr "" - -#: plugins/PerObjectSettingsTool/plugin.json -msgctxt "description" -msgid "Provides the Per Model Settings." -msgstr "" - -#: plugins/PerObjectSettingsTool/plugin.json -msgctxt "name" -msgid "Per Model Settings Tool" -msgstr "" - -#: plugins/ModelChecker/plugin.json -msgctxt "description" -msgid "Checks models and print configuration for possible printing issues and give suggestions." -msgstr "" - -#: plugins/ModelChecker/plugin.json -msgctxt "name" -msgid "Model Checker" -msgstr "" - -#: plugins/CuraEngineBackend/plugin.json -msgctxt "description" -msgid "Provides the link to the CuraEngine slicing backend." -msgstr "" - -#: plugins/CuraEngineBackend/plugin.json -msgctxt "name" -msgid "CuraEngine Backend" -msgstr "" - -#: plugins/CuraProfileWriter/plugin.json -msgctxt "description" -msgid "Provides support for exporting Cura profiles." -msgstr "" - -#: plugins/CuraProfileWriter/plugin.json -msgctxt "name" -msgid "Cura Profile Writer" -msgstr "" - -#: plugins/LegacyProfileReader/plugin.json -msgctxt "description" -msgid "Provides support for importing profiles from legacy Cura versions." -msgstr "" - -#: plugins/LegacyProfileReader/plugin.json -msgctxt "name" -msgid "Legacy Cura Profile Reader" -msgstr "" - -#: plugins/SolidView/plugin.json -msgctxt "description" -msgid "Provides a normal solid mesh view." -msgstr "" - -#: plugins/SolidView/plugin.json -msgctxt "name" -msgid "Solid View" -msgstr "" - -#: plugins/TrimeshReader/plugin.json -msgctxt "description" -msgid "Provides support for reading model files." -msgstr "" - -#: plugins/TrimeshReader/plugin.json -msgctxt "name" -msgid "Trimesh Reader" -msgstr "" - -#: plugins/PrepareStage/plugin.json -msgctxt "description" -msgid "Provides a prepare stage in Cura." -msgstr "" - -#: plugins/PrepareStage/plugin.json -msgctxt "name" -msgid "Prepare Stage" +msgid "UFP Reader" msgstr "" #: plugins/XRayView/plugin.json @@ -6894,3 +6844,53 @@ msgctxt "name" msgid "X-Ray View" msgstr "" +#: plugins/MachineSettingsAction/plugin.json +msgctxt "description" +msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." +msgstr "" + +#: plugins/MachineSettingsAction/plugin.json +msgctxt "name" +msgid "Machine Settings Action" +msgstr "" + +#: plugins/PreviewStage/plugin.json +msgctxt "description" +msgid "Provides a preview stage in Cura." +msgstr "" + +#: plugins/PreviewStage/plugin.json +msgctxt "name" +msgid "Preview Stage" +msgstr "" + +#: plugins/SliceInfoPlugin/plugin.json +msgctxt "description" +msgid "Submits anonymous slice info. Can be disabled through preferences." +msgstr "" + +#: plugins/SliceInfoPlugin/plugin.json +msgctxt "name" +msgid "Slice info" +msgstr "" + +#: plugins/Marketplace/plugin.json +msgctxt "description" +msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website." +msgstr "" + +#: plugins/Marketplace/plugin.json +msgctxt "name" +msgid "Marketplace" +msgstr "" + +#: plugins/FirmwareUpdater/plugin.json +msgctxt "description" +msgid "Provides a machine actions for updating firmware." +msgstr "" + +#: plugins/FirmwareUpdater/plugin.json +msgctxt "name" +msgid "Firmware Updater" +msgstr "" + diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po index 12fb0452e2..32d5befcda 100644 --- a/resources/i18n/de_DE/cura.po +++ b/resources/i18n/de_DE/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Antwort konnte nicht gelesen werden." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "Angegebener Status ist falsch." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Zeitüberschreitung bei der Authentifizierung mit dem Kontoserver." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Erteilen Sie bitte die erforderlichen Freigaben bei der Autorisierung dieser Anwendung." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Bei dem Versuch, sich anzumelden, trat ein unerwarteter Fehler auf. Bitte erneut versuchen." @@ -6695,22 +6695,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Drucker manuell hinzufügen" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Hersteller" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Autor des Profils" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Druckername" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Bitte weisen Sie Ihrem Drucker einen Namen zu" diff --git a/resources/i18n/es_ES/cura.po b/resources/i18n/es_ES/cura.po index 97d3071241..991ce49f1e 100644 --- a/resources/i18n/es_ES/cura.po +++ b/resources/i18n/es_ES/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.3\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -429,22 +429,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "No se ha podido leer la respuesta." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "El estado indicado no es correcto." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Se agotó el tiempo de autenticación con el servidor de la cuenta." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Conceda los permisos necesarios al autorizar esta aplicación." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Se ha producido un problema al intentar iniciar sesión, vuelva a intentarlo." @@ -6695,22 +6695,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Añadir impresora manualmente" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Fabricante" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Autor del perfil" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nombre de la impresora" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Asigne un nombre a su impresora" diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po index d3ee9c1988..f2b4e4cbcb 100644 --- a/resources/i18n/fi_FI/cura.po +++ b/resources/i18n/fi_FI/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2022-07-15 10:53+0200\n" "Last-Translator: Bothof \n" "Language-Team: Finnish\n" @@ -422,22 +422,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" @@ -6657,22 +6657,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "" diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po index cbde49e87c..ea1d51cd5a 100644 --- a/resources/i18n/fr_FR/cura.po +++ b/resources/i18n/fr_FR/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Impossible de lire la réponse." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "L'état fourni n'est pas correct." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Délai d'expiration lors de l'authentification avec le serveur de compte." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Veuillez donner les permissions requises lors de l'autorisation de cette application." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer." @@ -6695,22 +6695,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Ajouter l'imprimante manuellement" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Fabricant" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Auteur du profil" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nom de l'imprimante" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Veuillez nommer votre imprimante" diff --git a/resources/i18n/hu_HU/cura.po b/resources/i18n/hu_HU/cura.po index 1585bee5fb..9ea5ca5aea 100644 --- a/resources/i18n/hu_HU/cura.po +++ b/resources/i18n/hu_HU/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2020-03-24 09:36+0100\n" "Last-Translator: Nagy Attila \n" "Language-Team: ATI-SZOFT\n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Nincs olvasható válasz." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra." @@ -6671,22 +6671,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nyomtató név" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "" diff --git a/resources/i18n/it_IT/cura.po b/resources/i18n/it_IT/cura.po index 9ec567bace..ea4fc72cff 100644 --- a/resources/i18n/it_IT/cura.po +++ b/resources/i18n/it_IT/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Impossibile leggere la risposta." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "Lo stato fornito non è corretto." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Timeout durante l'autenticazione con il server account." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Fornire i permessi necessari al momento dell'autorizzazione di questa applicazione." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Si è verificato qualcosa di inatteso durante il tentativo di accesso, riprovare." @@ -6698,22 +6698,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Aggiungere la stampante manualmente" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Produttore" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Autore profilo" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nome stampante" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Dare un nome alla stampante" diff --git a/resources/i18n/ja_JP/cura.po b/resources/i18n/ja_JP/cura.po index 94141d8a6a..3a896394a5 100644 --- a/resources/i18n/ja_JP/cura.po +++ b/resources/i18n/ja_JP/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "応答を読み取れません。" -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "指定された状態が正しくありません。" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "アカウントサーバーでの認証中にタイムアウトしました。" -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "このアプリケーションの許可において必要な権限を与えてください。" -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "ログイン時に予期しないエラーが発生しました。やり直してください。" @@ -6677,22 +6677,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "プリンタを手動で追加する" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "製造元" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "プロファイル作成者" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "プリンター名" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "プリンターに名前を付けてください" diff --git a/resources/i18n/ko_KR/cura.po b/resources/i18n/ko_KR/cura.po index e1bf5fe3d9..f7a5f47e0a 100644 --- a/resources/i18n/ko_KR/cura.po +++ b/resources/i18n/ko_KR/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "응답을 읽을 수 없습니다." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "입력한 상태가 올바르지 않습니다." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "계정 서버 인증 시간이 초과되었습니다." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "이 응용 프로그램을 인증할 때 필요한 권한을 제공하십시오." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "로그인을 시도할 때 예기치 못한 문제가 발생했습니다. 다시 시도하십시오." @@ -6680,22 +6680,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "수동으로 프린터 추가" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "제조업체" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "프로파일 원작자" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "프린터 이름" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "프린터의 이름을 설정하십시오" diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po index d7e87b18fc..6c903dd42c 100644 --- a/resources/i18n/nl_NL/cura.po +++ b/resources/i18n/nl_NL/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Kan het antwoord niet lezen." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "De opgegeven status is niet juist." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Time-out tijdens verificatie bij de accountserver." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw." @@ -6698,22 +6698,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Printer handmatig toevoegen" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Fabrikant" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Profieleigenaar" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Printernaam" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Geef uw printer een naam" diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po index 5cfeec0834..6bdef88ffd 100644 --- a/resources/i18n/pl_PL/cura.po +++ b/resources/i18n/pl_PL/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2021-09-07 08:02+0200\n" "Last-Translator: Mariusz Matłosz \n" "Language-Team: Mariusz Matłosz , reprapy.pl\n" @@ -431,22 +431,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Nie można odczytać odpowiedzi." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "" -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie." @@ -6674,22 +6674,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Producent" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nazwa drukarki" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "" diff --git a/resources/i18n/pt_BR/cura.po b/resources/i18n/pt_BR/cura.po index 000bd101f5..4242a852d5 100644 --- a/resources/i18n/pt_BR/cura.po +++ b/resources/i18n/pt_BR/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.0\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2023-02-17 17:37+0100\n" "Last-Translator: Cláudio Sampaio \n" "Language-Team: Cláudio Sampaio \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Não foi possível ler a resposta." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "O estado provido não está correto." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Tempo esgotado ao autenticar com o servidor da conta." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Por favor dê as permissões requeridas ao autorizar esta aplicação." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Algo inesperado aconteceu ao tentar login, por favor tente novamente." @@ -6700,22 +6700,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Adicionar impressora manualmente" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Fabricante" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Autor do perfil" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nome da impressora" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Por favor dê um nome à sua impressora" diff --git a/resources/i18n/pt_PT/cura.po b/resources/i18n/pt_PT/cura.po index 1518467eec..21eace1a53 100644 --- a/resources/i18n/pt_PT/cura.po +++ b/resources/i18n/pt_PT/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Não foi possível ler a resposta." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "O estado apresentado não está correto." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Foi excedido o tempo limite de autenticação com o servidor." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Forneça as permissões necessárias ao autorizar esta aplicação." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Ocorreu algo inesperado ao tentar iniciar sessão, tente novamente." @@ -6697,22 +6697,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Adicionar impressora manualmente" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Fabricante" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Autor do perfil" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Nome da impressora" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Atribuir um nome à impressora" diff --git a/resources/i18n/ru_RU/cura.po b/resources/i18n/ru_RU/cura.po index b6a981d44e..a43df3e590 100644 --- a/resources/i18n/ru_RU/cura.po +++ b/resources/i18n/ru_RU/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Не удалось прочитать ответ." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "Указано неверное состояние." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Истекло время аутентификации на сервере учетной записи." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Дайте необходимые разрешения при авторизации в этом приложении." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Возникла непредвиденная ошибка при попытке входа в систему. Повторите попытку." @@ -6712,22 +6712,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Добавить принтер вручную" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Производитель" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Автор профиля" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Имя принтера" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Присвойте имя принтеру" diff --git a/resources/i18n/tr_TR/cura.po b/resources/i18n/tr_TR/cura.po index 681d934e19..7731155049 100644 --- a/resources/i18n/tr_TR/cura.po +++ b/resources/i18n/tr_TR/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "Yanıt okunamadı." -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "Sağlanan durum doğru değil." -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Hesap sunucusuyla kimlik doğrulaması yapılırken zaman aşımı oluştu." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Lütfen bu başvuruya yetki verirken gerekli izinleri verin." -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Oturum açmaya çalışırken beklenmeyen bir sorun oluştu, lütfen tekrar deneyin." @@ -6698,22 +6698,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "Yazıcıyı manuel olarak ekle" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "Üretici" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "Profil sahibi" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "Yazıcı adı" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "Lütfen yazıcınızı adlandırın" diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po index 1437036365..5d63f8552b 100644 --- a/resources/i18n/zh_CN/cura.po +++ b/resources/i18n/zh_CN/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2022-07-15 11:06+0200\n" "Last-Translator: \n" "Language-Team: \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "无法读取响应。" -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "所提供的状态不正确。" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "使用帐户服务器进行身份验证超时。" -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "在授权此应用程序时，须提供所需权限。" -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "尝试登录时出现意外情况，请重试。" @@ -6682,22 +6682,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "手动添加打印机" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "制造商" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "配置文件作者" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "打印机名称" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "请为您的打印机命名" diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po index ac25b65d37..0a4522c657 100644 --- a/resources/i18n/zh_TW/cura.po +++ b/resources/i18n/zh_TW/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-04-06 15:55+0000\n" +"POT-Creation-Date: 2023-04-27 12:22+0000\n" "PO-Revision-Date: 2022-01-02 19:59+0800\n" "Last-Translator: Valen Chang \n" "Language-Team: Valen Chang \n" @@ -430,22 +430,22 @@ msgctxt "@message" msgid "Could not read response." msgstr "雲端沒有讀取回應。" -#: cura/OAuth2/AuthorizationRequestHandler.py:75 +#: cura/OAuth2/AuthorizationRequestHandler.py:77 msgctxt "@message" msgid "The provided state is not correct." msgstr "提供的狀態不正確。" -#: cura/OAuth2/AuthorizationRequestHandler.py:80 +#: cura/OAuth2/AuthorizationRequestHandler.py:83 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "在向帳戶伺服器進行身分驗證時逾時." -#: cura/OAuth2/AuthorizationRequestHandler.py:97 +#: cura/OAuth2/AuthorizationRequestHandler.py:101 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "核准此應用程式時，請給予所需的權限。" -#: cura/OAuth2/AuthorizationRequestHandler.py:104 +#: cura/OAuth2/AuthorizationRequestHandler.py:109 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "嘗試登入時出現意外狀況，請再試一次。" @@ -6673,22 +6673,22 @@ msgctxt "@button" msgid "Add printer manually" msgstr "手動新增印表機" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212 msgctxt "@label" msgid "Manufacturer" msgstr "製造商" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:223 msgctxt "@label" msgid "Profile author" msgstr "列印參數作者" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@label" msgid "Printer name" msgstr "印表機名稱" -#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 +#: resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:241 msgctxt "@text" msgid "Please name your printer" msgstr "請為你的印表機取一個名稱"