Add new recommended mode tooltips and remove extra margin at the bottom of tooltips.

CURA-9793

resources/qml/PrintSetupSelector/Recommended/RecommendedStrengthSelector.qml

@@ -17,7 +17,7 @@ RecommendedSettingSection
     icon: UM.Theme.getIcon("Hammer")
     enableSectionSwitchVisible: false
     enableSectionSwitchEnabled: false
-    tooltipText: ""
+    tooltipText: catalog.i18nc("@label", "The following settings define the strength of your part.")
 
     UM.SettingPropertyProvider
     {
@@ -53,7 +53,8 @@ RecommendedSettingSection
         RecommendedSettingItem
         {
             settingName: catalog.i18nc("@action:label", "Infill Pattern")
-            tooltipText: catalog.i18nc("infill_pattern description", "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object.")
+            tooltipText: catalog.i18nc("@label",
+            "The pattern of the infill material of the print:\n\nFor quick prints of non functional model choose line, zig zag or lighting infill.\n\nFor functional part not subjected to a lot of stress we reccomend grid or triangle or tri hexagon.\n\nFor functional 3D prints which require high strenght in multiple directions use cubic, cubic subdivision, quarter cubic, octet, and gyroid.")
 
             settingControl: Cura.SingleSettingComboBox
             {
@@ -65,6 +66,7 @@ RecommendedSettingSection
         RecommendedSettingItem
         {
             settingName: catalog.i18nc("@action:label", "Shell Thickness")
+            tooltipText: catalog.i18nc("@label", "Defines the tickness of your part side walls, roof and floor.")
 
             settingControl: RowLayout
             {

resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml

@@ -18,7 +18,7 @@ RecommendedSettingSection
     enableSectionSwitchVisible: supportEnabled.properties.enabled == "True"
     enableSectionSwitchChecked: supportEnabled.properties.value == "True"
     enableSectionSwitchEnabled: recommendedPrintSetup.settingsEnabled
-    tooltipText: catalog.i18nc("@label", "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing.")
+    tooltipText: catalog.i18nc("@label", "Generate structures to support parts of the model which have overhangs. Without these structures, these parts would collapse during printing.")
 
     function onEnableSectionChanged(state)
     {
@@ -54,7 +54,7 @@ RecommendedSettingSection
         RecommendedSettingItem
         {
             settingName: catalog.i18nc("@action:label", "Support Type")
-            tooltipText: catalog.i18nc("support_structure description", "Chooses between the techniques available to generate support. \"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible.")
+            tooltipText: catalog.i18nc("@label", "Chooses between the techniques available to generate support. \n\n\"Normal\" support creates a support structure directly below the overhanging parts and drops those areas straight down. \n\n\"Tree\" support creates branches towards the overhanging areas that support the model on the tips of those branches, and allows the branches to crawl around the model to support it from the build plate as much as possible.")
             isCompressed: enableSupportRow.isCompressed
 
             settingControl: Cura.SingleSettingComboBox
@@ -67,7 +67,7 @@ RecommendedSettingSection
         {
             Layout.preferredHeight: childrenRect.height
             settingName: catalog.i18nc("@action:label", "Print with")
-            tooltipText: catalog.i18nc("support_extruder_nr description", "The extruder train to use for printing the support. This is used in multi-extrusion.")
+            tooltipText: catalog.i18nc("@label", "The extruder train to use for printing the support. This is used in multi-extrusion.")
             // Hide this component when there is only one extruder
             enabled: machineExtruderCount.properties.value > 1
             visible: machineExtruderCount.properties.value > 1

resources/qml/PrintSetupTooltip.qml

@@ -11,7 +11,7 @@ UM.PointingRectangle
     id: base
     property real sourceWidth: 0
     width: UM.Theme.getSize("tooltip").width
-    height: textScroll.height + UM.Theme.getSize("tooltip_margins").height * 2
+    height: textScroll.height + UM.Theme.getSize("tooltip_margins").height
     color: UM.Theme.getColor("tooltip")
 
     arrowSize: UM.Theme.getSize("default_arrow").width