diff --git a/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml b/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml
index 005d719266..ab944d0dcc 100644
--- a/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml
+++ b/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml
@@ -73,7 +73,7 @@ Rectangle
         hoverEnabled: true;
 
         // Only clickable if no printer is selected
-        enabled: OutputDevice.selectedPrinterName == ""
+        enabled: OutputDevice.selectedPrinterName == "" && printer.status !== "unreachable"
     }
 
     Row
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index 2f4ad4e1a8..21f80e18fd 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -67,7 +67,7 @@
         "machine_extruder_count": { "default_value": 2 },
         "extruder_prime_pos_abs": { "default_value": true },
         "machine_start_gcode": { "default_value": "" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative movement\nG0 F2400 Z3 E-{retraction_amount}\nG90 ;Disable relative movement" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative movement\nG0 F15000 X8.0 Z0.5 E-4.5 ;Wiping+material retraction\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement" },
         "prime_tower_position_x": { "value": "machine_depth - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) - 30" },
         "prime_tower_wipe_enabled": { "default_value": false },
 
diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po
index 1323070dbe..a18361802b 100644
--- a/resources/i18n/de_DE/cura.po
+++ b/resources/i18n/de_DE/cura.po
@@ -36,6 +36,31 @@ msgctxt "@label:status"
 msgid "Can't start print"
 msgstr "Druck startet nicht"
 
+#: Manually added for plugins/UM3NetworkPrinting/DiscoverUM3Action.qml
+msgctxt "@label"
+msgid "This printer is not set up to host a group of Ultimaker 3 printers."
+msgstr "Dieser Drucker ist nicht eingerichtet um eine Gruppe von Ultimaker 3 Druckern anzusteuern."
+
+#: Manually added for plugins/UM3NetworkPrinting/PrinterInfoBlock.qml
+msgctxt "@label"
+msgid "Finishes at: "
+msgstr "Endet um: "
+
+#: Manually added for plugins/UM3NetworkPrinting/DiscoverUM3Action.qml
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 Ultimaker 3 printers."
+msgstr "Dieser Drucker steuert eine Gruppe von %1 Ultimaker 3 Druckern an."
+
+#: Manually added for plugins/UM3NetworkPrinting/NetworkClusterPrinterOutputDevice.py
+msgctxt "@info:status"
+msgid "Printer '{printer_name}' has finished printing '{job_name}'."
+msgstr "Drucker '{printer_name}' hat '{job_name}' vollständig gedrückt."
+
+#: Manually added for plugins/UM3NetworkPrinting/NetworkClusterPrinterOutputDevice.py
+msgctxt "@info:status"
+msgid "Print finished"
+msgstr "Druck vollendet"
+
 #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:29
 msgctxt "@action"
 msgid "Machine Settings"