diff --git a/resources/quality/zyyx_pro/zyyx_pro_12_normal_pla.inst.cfg b/resources/quality/zyyx_pro/zyyx_pro_12_normal_pla.inst.cfg
new file mode 100644
index 0000000000..7473bea4b8
--- /dev/null
+++ b/resources/quality/zyyx_pro/zyyx_pro_12_normal_pla.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+version = 4
+name = Normal ZYYX PLA
+definition = zyyx_pro
+
+[metadata]
+setting_version = 1
+type = quality
+quality_type = normal_pla
+weight = -2
+global_quality = True
+variant = Carbon1.2 (experimental)
+
+[values]
+layer_height = 0.5
+brim_width = 7
+skirt_line_count = 2
+adhesion_type = skirt
+infill_overlap = -2
+wall_thickness = =line_width *2
+
+material_print_temperature_layer_0 = 230
+material_bed_temperature = 35
+
+skin_overlap = 15
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+infill_pattern = quarter_cubic
+top_bottom_thickness = =layer_height*3
+
+retraction_amount = 1.5
+retraction_speed = 20
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+
diff --git a/resources/variants/zyyx/zyyx_pro_carbon1.2.inst.cfg b/resources/variants/zyyx/zyyx_pro_carbon1.2.inst.cfg
new file mode 100644
index 0000000000..72a06ff1e1
--- /dev/null
+++ b/resources/variants/zyyx/zyyx_pro_carbon1.2.inst.cfg
@@ -0,0 +1,67 @@
+[general]
+name = Carbon1.2 (experimental)
+version = 4
+definition = zyyx_pro
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 7
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_speed = 5
+default_material_print_temperature = 200
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_print = 25
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+layer_height = 0.2
+line_width = =machine_nozzle_size
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_id = Multi0.8
+machine_nozzle_size = 0.8
+machine_nozzle_tip_outer_diameter = 1.8
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
+retract_at_layer_change = =not magic_spiralize
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = =line_width * 2
+skin_overlap = 5
+speed_equalize_flow_enabled = True
+speed_layer_0 = 20
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 25 / 35)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+wall_0_inset = 0
+wall_line_width_0 = =wall_line_width
+wall_line_width_x = =wall_line_width
+wall_thickness = 2