Applied printer-linter format

resources/definitions/flashforge_adventurer3.def.json

@@ -4,12 +4,12 @@
     "inherits": "flashforge_adventurer3c",
     "metadata":
     {
-        "author": "Jeremie-C",
         "visible": true,
+        "author": "Jeremie-C",
         "supports_network_connection": true
     },
     "overrides":
     {
-        "machine_name": {"default_value": "Adventurer 3"}
+        "machine_name": { "default_value": "Adventurer 3" }
     }
 }

resources/definitions/flashforge_adventurer3c.def.json

@@ -2,23 +2,32 @@
     "version": 2,
     "name": "Adventurer 3C",
     "inherits": "flashforge_adventurer_base",
-    "metadata": {
+    "metadata":
-        "author": "Jeremie-C",
+    {
         "visible": true,
+        "author": "Jeremie-C",
         "quality_definition": "flashforge_adventurer3"
     },
     "overrides":
     {
-        "default_material_bed_temperature": {"maximum_value_warning": "100"},
+        "default_material_bed_temperature": { "maximum_value_warning": "100" },
-        "gantry_height": {"value": "150"},
+        "gantry_height": { "value": "150" },
-        "machine_center_is_zero": {"default_value": true},
+        "machine_center_is_zero": { "default_value": true },
-        "machine_depth": {"default_value": 150},
+        "machine_depth": { "default_value": 150 },
-        "machine_end_gcode": {"default_value": ";end gcode\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18"},
+        "machine_end_gcode": { "default_value": ";end gcode\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18" },
-        "machine_head_with_fans_polygon": {"default_value": [[-20, 10], [-20, -10], [10, 10], [10, -10]]},
+        "machine_head_with_fans_polygon":
-        "machine_height": {"default_value": 150},
+        {
-        "machine_name": {"default_value": "Adventurer 3C"},
+            "default_value": [
-        "machine_start_gcode": {"default_value": ";Start Gcode\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;End Start"},
+                [-20, 10],
-        "machine_width": {"default_value": 150},
+                [-20, -10],
-        "speed_print": {"maximum_value_warning": 100}
+                [10, 10],
+                [10, -10]
+            ]
+        },
+        "machine_height": { "default_value": 150 },
+        "machine_name": { "default_value": "Adventurer 3C" },
+        "machine_start_gcode": { "default_value": ";Start Gcode\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;End Start" },
+        "machine_width": { "default_value": 150 },
+        "speed_print": { "maximum_value_warning": 100 }
     }
 }

resources/definitions/flashforge_adventurer4.def.json

@@ -4,22 +4,30 @@
     "inherits": "flashforge_adventurer_base",
     "metadata":
     {
-        "author": "Jeremie-C",
         "visible": true,
+        "author": "Jeremie-C",
         "quality_definition": "flashforge_adventurer4",
         "supports_network_connection": true
     },
     "overrides":
     {
-        "default_material_bed_temperature": {"maximum_value_warning": "110"},
+        "default_material_bed_temperature": { "maximum_value_warning": "110" },
-        "gantry_height": {"value": "250"},
+        "gantry_height": { "value": "250" },
-        "machine_depth": {"default_value": 200},
+        "machine_depth": { "default_value": 200 },
-        "machine_end_gcode": {"default_value": ";End Gcode\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18"},
+        "machine_end_gcode": { "default_value": ";End Gcode\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18" },
-        "machine_head_with_fans_polygon": {"default_value": [[-20, 10], [-20, -10], [10, 10], [10, -10]]},
+        "machine_head_with_fans_polygon":
-        "machine_height": {"default_value": 250},
+        {
-        "machine_name": {"default_value": "Adventurer 4"},
+            "default_value": [
-        "machine_start_gcode": {"default_value": ";Start Gcode\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;End Start"},
+                [-20, 10],
-        "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
+                [-20, -10],
-        "machine_width": {"default_value": 220}
+                [10, 10],
+                [10, -10]
+            ]
+        },
+        "machine_height": { "default_value": 250 },
+        "machine_name": { "default_value": "Adventurer 4" },
+        "machine_start_gcode": { "default_value": ";Start Gcode\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;End Start" },
+        "machine_use_extruder_offset_to_offset_coords": { "default_value": false },
+        "machine_width": { "default_value": 220 }
     }
 }

resources/definitions/flashforge_adventurer4lite.def.json

@@ -4,8 +4,8 @@
     "inherits": "flashforge_adventurer4",
     "metadata":
     {
-        "author": "Jeremie-C",
+        "visible": true,
-        "visible": true
+        "author": "Jeremie-C"
     },
     "overrides":
     {

resources/definitions/flashforge_adventurer_base.def.json

@@ -4,15 +4,15 @@
     "inherits": "fdmprinter",
     "metadata":
     {
+        "visible": false,
         "author": "Jeremie-C",
         "manufacturer": "Flashforge",
-        "visible": false,
         "file_formats": "application/gx;text/x-gcode",
-        "first_start_actions": ["MachineSettingsAction"],
+        "first_start_actions": [ "MachineSettingsAction" ],
         "has_machine_quality": true,
         "has_materials": true,
         "has_variants": true,
-        "machine_extruder_trains": {"0": "flashforge_adventurer_extruder_0"},
+        "machine_extruder_trains": { "0": "flashforge_adventurer_extruder_0" },
         "preferred_material": "generic_pla",
         "preferred_quality_type": "normal",
         "preferred_variant_name": "0.4mm Nozzle",
@@ -20,15 +20,15 @@
     },
     "overrides":
     {
-        "adhesion_type": {"default_value": "skirt"},
+        "adhesion_type": { "default_value": "skirt" },
-        "default_material_print_temperature": {"maximum_value_warning": "265"},
+        "default_material_print_temperature": { "maximum_value_warning": "265" },
         "layer_height":
         {
-            "minimum_value_warning": "0.1",
+            "maximum_value_warning": "0.4",
-            "maximum_value_warning": "0.4"
+            "minimum_value_warning": "0.1"
         },
-        "machine_center_is_zero": {"default_value": true},
+        "machine_center_is_zero": { "default_value": true },
-        "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_heated_bed": {"default_value": true}
+        "machine_heated_bed": { "default_value": true }
     }
 }

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_fine.inst.cfg

@@ -14,3 +14,4 @@ weight = 1
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_vfine.inst.cfg

@@ -14,3 +14,4 @@ weight = 2
 [values]
 speed_print = 45
 speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 70
 speed_travel = 90
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 60
 speed_travel = 80
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fine.inst.cfg

@@ -14,3 +14,4 @@ weight = 1
 [values]
 speed_print = 40
 speed_travel = 70
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_normal.inst.cfg

@@ -14,3 +14,4 @@ weight = 0
 [values]
 speed_print = 60
 speed_travel = 80
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 60
 speed_travel = 90
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfine.inst.cfg

@@ -14,3 +14,4 @@ weight = 2
 [values]
 speed_print = 35
 speed_travel = 70
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 55
 speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.3mm Nozzle
 weight = 1
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_vfine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.3mm Nozzle
 weight = 2
 
 [values]
-speed_print = 45
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 45
+speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -3
 
 [values]
-speed_print = 70
-speed_travel = 90
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 70
+speed_travel = 90
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -1
 
 [values]
-speed_print = 60
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 60
+speed_travel = 80
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 1
 
 [values]
-speed_print = 40
-speed_travel = 70
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 40
+speed_travel = 70
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_normal.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 0
 
 [values]
-speed_print = 60
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 60
+speed_travel = 80
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -2
 
 [values]
-speed_print = 60
-speed_travel = 90
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 60
+speed_travel = 90
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 2
 
 [values]
-speed_print = 35
-speed_travel = 70
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 35
+speed_travel = 70
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -3
 
 [values]
-speed_print = 55
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 55
+speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -1
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -2
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -1
 
 [values]
-speed_print = 45
-speed_travel = 100
 retraction_amount = 4.5
 retraction_speed = 30
+speed_print = 45
+speed_travel = 100
+

resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -1
 
 [values]
-speed_print = 35
-speed_travel = 100
 retraction_amount = 4.5
 retraction_speed = 30
+speed_print = 35
+speed_travel = 100
+

resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_normal.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 0
 
 [values]
-speed_print = 40
-speed_travel = 100
 retraction_amount = 4.5
 retraction_speed = 30
+speed_print = 40
+speed_travel = 100
+

resources/quality/flashforge/flashforge_adventurer3_draft.inst.cfg

@@ -18,3 +18,4 @@ retraction_speed = 25
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer3_fast.inst.cfg

@@ -18,3 +18,4 @@ retraction_speed = 25
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer3_fine.inst.cfg

@@ -18,3 +18,4 @@ retraction_speed = 25
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer3_normal.inst.cfg

@@ -18,3 +18,4 @@ retraction_speed = 25
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer3_vfast.inst.cfg

@@ -18,3 +18,4 @@ retraction_speed = 25
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer3_vfine.inst.cfg

@@ -18,3 +18,4 @@ retraction_speed = 25
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer4_draft.inst.cfg

@@ -16,3 +16,4 @@ layer_height_0 = 0.4
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer4_fast.inst.cfg

@@ -16,3 +16,4 @@ layer_height_0 = 0.3
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer4_fine.inst.cfg

@@ -16,3 +16,4 @@ layer_height_0 = 0.23
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer4_normal.inst.cfg

@@ -16,3 +16,4 @@ layer_height_0 = 0.3
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer4_vfast.inst.cfg

@@ -16,3 +16,4 @@ layer_height_0 = 0.3
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/flashforge_adventurer4_vfine.inst.cfg

@@ -16,3 +16,4 @@ layer_height_0 = 0.18
 speed_infill = =speed_print
 speed_layer_0 = 10
 speed_support = =math.ceil(speed_print * 0.6)
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 50
 speed_travel = 90
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 40
 speed_travel = 80
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_normal.inst.cfg

@@ -14,3 +14,4 @@ weight = 0
 [values]
 speed_print = 40
 speed_travel = 80
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 50
 speed_travel = 90
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 60
 speed_travel = 100
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -3
 
 [values]
-speed_print = 50
-speed_travel = 90
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 50
+speed_travel = 90
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -1
 
 [values]
-speed_print = 40
-speed_travel = 80
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 40
+speed_travel = 80
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_normal.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 0
 
 [values]
-speed_print = 40
-speed_travel = 80
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 40
+speed_travel = 80
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -2
 
 [values]
-speed_print = 50
-speed_travel = 90
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 50
+speed_travel = 90
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -3
 
 [values]
-speed_print = 60
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 60
+speed_travel = 100
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -2
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -2
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_fine.inst.cfg

@@ -14,3 +14,4 @@ weight = 1
 [values]
 speed_print = 50
 speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_vfine.inst.cfg

@@ -14,3 +14,4 @@ weight = 2
 [values]
 speed_print = 50
 speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 65
 speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 55
 speed_travel = 85
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fine.inst.cfg

@@ -14,3 +14,4 @@ weight = 1
 [values]
 speed_print = 40
 speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_normal.inst.cfg

@@ -14,3 +14,4 @@ weight = 0
 [values]
 speed_print = 50
 speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 60
 speed_travel = 90
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfine.inst.cfg

@@ -14,3 +14,4 @@ weight = 2
 [values]
 speed_print = 40
 speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 65
 speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.3mm Nozzle
 weight = 1
 
 [values]
-speed_print = 50
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 50
+speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_vfine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.3mm Nozzle
 weight = 2
 
 [values]
-speed_print = 50
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 50
+speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -3
 
 [values]
-speed_print = 65
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 65
+speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -1
 
 [values]
-speed_print = 55
-speed_travel = 85
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 55
+speed_travel = 85
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 1
 
 [values]
-speed_print = 40
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 40
+speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_normal.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 0
 
 [values]
-speed_print = 50
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 50
+speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -2
 
 [values]
-speed_print = 60
-speed_travel = 90
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 60
+speed_travel = 90
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 2
 
 [values]
-speed_print = 40
-speed_travel = 80
 retraction_amount = 5
 retraction_speed = 25
+speed_print = 40
+speed_travel = 80
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -3
 
 [values]
-speed_print = 65
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 20
+speed_print = 65
+speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -1
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 20
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -2
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 20
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_fine.inst.cfg

@@ -14,3 +14,4 @@ weight = 1
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_vfine.inst.cfg

@@ -14,3 +14,4 @@ weight = 2
 [values]
 speed_print = 45
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -3
 [values]
 speed_print = 75
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 65
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fine.inst.cfg

@@ -14,3 +14,4 @@ weight = 1
 [values]
 speed_print = 50
 speed_travel = 80
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_normal.inst.cfg

@@ -14,3 +14,4 @@ weight = 0
 [values]
 speed_print = 60
 speed_travel = 80
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 70
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfine.inst.cfg

@@ -14,3 +14,4 @@ weight = 2
 [values]
 speed_print = 40
 speed_travel = 70
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_draft.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 60
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_fast.inst.cfg

@@ -14,3 +14,4 @@ weight = -1
 [values]
 speed_print = 50
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_vfast.inst.cfg

@@ -14,3 +14,4 @@ weight = -2
 [values]
 speed_print = 55
 speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.3mm Nozzle
 weight = 1
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_vfine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.3mm Nozzle
 weight = 2
 
 [values]
-speed_print = 45
-speed_travel = 100
 retraction_amount = 5
 retraction_speed = 30
+speed_print = 45
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -2
 
 [values]
-speed_print = 65
-speed_travel = 100
 retraction_amount = 5.5
 retraction_speed = 25
+speed_print = 65
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -1
 
 [values]
-speed_print = 55
-speed_travel = 100
 retraction_amount = 5.5
 retraction_speed = 25
+speed_print = 55
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 1
 
 [values]
-speed_print = 45
-speed_travel = 90
 retraction_amount = 5.5
 retraction_speed = 25
+speed_print = 45
+speed_travel = 90
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_normal.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 0
 
 [values]
-speed_print = 50
-speed_travel = 100
 retraction_amount = 5.5
 retraction_speed = 25
+speed_print = 50
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = -2
 
 [values]
-speed_print = 60
-speed_travel = 100
 retraction_amount = 5.5
 retraction_speed = 25
+speed_print = 60
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfine.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.4mm Nozzle
 weight = 2
 
 [values]
-speed_print = 40
-speed_travel = 80
 retraction_amount = 5.5
 retraction_speed = 25
+speed_print = 40
+speed_travel = 80
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_draft.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -2
 
 [values]
-speed_print = 65
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 65
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_fast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -1
 
 [values]
-speed_print = 60
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 60
+speed_travel = 100
+

resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_vfast.inst.cfg

@@ -12,7 +12,8 @@ variant = 0.6mm Nozzle
 weight = -2
 
 [values]
-speed_print = 60
-speed_travel = 100
 retraction_amount = 6
 retraction_speed = 30
+speed_print = 60
+speed_travel = 100
+