Merge branch 'master' of github.com:jianshu-du/Cura

resources/definitions/mingda_1000pro.def.json

@@ -0,0 +1,24 @@
+{
+    "name": "Mingda 1000Pro",
+    "version": 2,
+    "inherits": "mingda_base",
+    "overrides":
+    {
+        "machine_name": { "default_value": "Mingda 1000Pro" },
+		
+		"machine_start_gcode": { "default_value": " G28 ; home all axes\n M420 S1\n M117 ; Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F1200 ; move z up little to prevent scratching of surface\n G1 X4 Y20 Z0.3 F3000.0 ; move to start-line position\n G1 X4 Y380.0 Z0.3 F1500.0 E30 ; draw 1st line\n G1 X4 Y380.0 Z0.4 F3000.0 ; move to side a little\n G1 X4 Y20 Z0.4 F1500.0 E60 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F1500 ; move z up little to prevent scratching of surface"},
+        
+		"machine_end_gcode": { "default_value": " G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y0 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n M84 ; disable motors\n M106 S0 ; turn off fan" },
+		
+        "machine_width": { "default_value": 1000 },
+        "machine_depth": { "default_value": 1000 },
+        "machine_height": { "default_value": 1000 },
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata":
+    {
+        "quality_definition": "mingda_base",
+        "visible": true
+    }
+}

resources/definitions/mingda_4h.def.json

@@ -0,0 +1,19 @@
+{
+    "name": "Mingda 4H",
+    "version": 2,
+    "inherits": "mingda_base",
+    "overrides":
+    {
+        "machine_name": { "default_value": "Mingda 4H" },
+		
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 200 },
+        "machine_height": { "default_value": 200 },
+        "gantry_height": { "value": 25 }
+    },
+    "metadata":
+    {
+        "quality_definition": "mingda_base",
+        "visible": true
+    }
+}

resources/definitions/mingda_600pro.def.json

@@ -0,0 +1,24 @@
+{
+    "name": "Mingda 600Pro",
+    "version": 2,
+    "inherits": "mingda_base",
+    "overrides":
+    {
+        "machine_name": { "default_value": "Mingda 600Pro" },
+		
+		"machine_start_gcode": { "default_value": " G28 ; home all axes\n M420 S1\n M117 ; Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F1200 ; move z up little to prevent scratching of surface\n G1 X4 Y20 Z0.3 F3000.0 ; move to start-line position\n G1 X4 Y380.0 Z0.3 F1500.0 E30 ; draw 1st line\n G1 X4 Y380.0 Z0.4 F3000.0 ; move to side a little\n G1 X4 Y20 Z0.4 F1500.0 E60 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F1500 ; move z up little to prevent scratching of surface"},
+        
+		"machine_end_gcode": { "default_value": " G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y0 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n M84 ; disable motors\n M106 S0 ; turn off fan" },
+		
+        "machine_width": { "default_value": 600 },
+        "machine_depth": { "default_value": 600 },
+        "machine_height": { "default_value": 600 },
+        "gantry_height": { "value": 25 }
+
+    },
+    "metadata":
+    {
+        "quality_definition": "mingda_base",
+        "visible": true
+    }
+}

resources/definitions/mingda_6h.def.json

@@ -0,0 +1,19 @@
+{
+    "name": "Mingda 6H",
+    "version": 2,
+    "inherits": "mingda_base",
+    "overrides":
+    {
+        "machine_name": { "default_value": "Mingda 6H" },
+		
+        "machine_width": { "default_value": 400 },
+        "machine_depth": { "default_value": 300 },
+        "machine_height": { "default_value": 500 },
+        "gantry_height": { "value": 25 }
+    },
+    "metadata":
+    {
+        "quality_definition": "mingda_base",
+        "visible": true
+    }
+}

resources/definitions/mingda_base.def.json

@@ -110,9 +110,10 @@
         "speed_print": { "value": 60.0 } ,
         "speed_wall_x": { "value": "speed_wall" },
         "speed_roofing": { "value": "speed_topbottom" },
-        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
+        "speed_travel": { "value": "80.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 1.5" },
         "speed_layer_0": { "value": 20.0 },
-        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
+        "speed_print_layer_0": { "value": "speed_layer_0" },
+        "speed_travel_layer_0": { "value": "60 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 1.5" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_support": { "value": "speed_wall_0" },
         "speed_support_interface": { "value": "speed_topbottom" },
@@ -120,7 +121,7 @@
 
         "skirt_brim_speed": { "value": "speed_layer_0" },
 
-        "line_width": { "value": "machine_nozzle_size * 1.1" },
+        "line_width": { "value": "machine_nozzle_size * 1" },
 
         "optimize_wall_printing_order": { "value": true },
 
@@ -131,12 +132,13 @@
         "z_seam_corner": { "value": "'z_seam_corner_none'" },
         
         "infill_sparse_density": { "value": "15" },
-        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
+        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'" },
         "infill_before_walls": { "value": false },
         "infill_overlap": { "value": 30.0 },
         "skin_overlap": { "value": 10.0 },
         "infill_wipe_dist": { "value": 0.0 },
         "wall_0_wipe_dist": { "value": 0.0 },
+        "wall_0_material_flow": { "value": "0.95 * material_flow"},
 
         "fill_outline_gaps": { "value": false },
 
@@ -162,15 +164,15 @@
         "travel_retract_before_outer_wall": { "value": true },
         
 		"retraction_amount": { "value": 2 },
-
+        "retraction_enable": { "value": true },
         "retraction_count_max": { "value": 100 },
-        "retraction_extrusion_window": { "value": 10 },
+        "retraction_extrusion_window": { "value": 3 },
         "retraction_min_travel": { "value": 1.5 },
 
         "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
         "cool_min_layer_time": { "value": 10 },
 
-        "adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
+        "adhesion_type": { "value": "'none' if support_enable else 'raft'" },
         "brim_replaces_support": { "value": false },
         "skirt_gap": { "value": 10.0 },
         "skirt_line_count": { "value": 4 },
@@ -202,6 +204,5 @@
         "minimum_interface_area": { "value": 10 },
         "top_bottom_thickness": {"value":  "layer_height_0 + layer_height * 3" },
         "wall_thickness": {"value": "line_width * 2" }
-
     }
 }

resources/definitions/mingda_d2.def.json

@@ -2,15 +2,16 @@
     "name": "Mingda D2",
     "version": 2,
     "inherits": "mingda_base",
-    "overrides": {
+    "overrides":
+    {
         "machine_name": { "default_value": "MINGDA D2" },
         "machine_width": { "default_value": 230 },
         "machine_depth": { "default_value": 230 },
         "machine_height": { "default_value": 260 },
         "gantry_height": { "value": 25 }
-
     },
-    "metadata": {
+    "metadata":
+    {
         "quality_definition": "mingda_base",
         "visible": true,
         "platform": "mingda_d2_base.stl",

resources/definitions/mingda_d3pro.def.json

@@ -2,17 +2,16 @@
     "name": "Mingda D3/Pro",
     "version": 2,
     "inherits": "mingda_base",
-    "overrides": {
+    "overrides":
+    {
         "machine_name": { "default_value": "MINGDA D3/Pro" },
         "machine_width": { "default_value": 320 },
         "machine_depth": { "default_value": 320 },
         "machine_height": { "default_value": 400 },
         "gantry_height": { "value": 25 }
-		
-        
-
     },
-    "metadata": {
+    "metadata":
+    {
         "quality_definition": "mingda_base",
         "visible": true,
         "platform": "mingda_rock3_base.stl",

resources/definitions/mingda_d4pro.def.json

@@ -2,16 +2,17 @@
     "name": "Mingda D4 Pro",
     "version": 2,
     "inherits": "mingda_base",
-    "overrides": {
+    "overrides":
+    {
         "machine_name": { "default_value": "MINGDA D4 Pro" },
 		"machine_start_gcode": { "default_value": "G28 ; home all axes\n G29; ABL\n M117 Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface"},
         "machine_width": { "default_value": 420 },
         "machine_depth": { "default_value": 420 },
         "machine_height": { "default_value": 400 },
         "gantry_height": { "value": 25 }
-
     },
-    "metadata": {
+    "metadata":
+    {
         "quality_definition": "mingda_base",
         "visible": true,
         "platform": "mingda_d4pro_base.stl",

resources/definitions/mingda_magician_max.def.json

@@ -4,6 +4,11 @@
     "inherits": "mingda_base",
     "overrides": {
         "machine_name": { "default_value": "Mingda Magician Max" },
+		
+		"machine_start_gcode": { "default_value": " G28 ; home all axes\n M420 S1\n M117 ; Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface"},
+        
+		"machine_end_gcode": { "default_value": " G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y0 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n M84 ; disable motors\n M420 S0\n M106 S0 ; turn off fan" },
+		
         "machine_width": { "default_value": 320 },
         "machine_depth": { "default_value": 320 },
         "machine_height": { "default_value": 400 },
@@ -13,7 +18,7 @@
     "metadata": {
 		"quality_definition": "mingda_base",
 		"visible": true,
-		"platform": "mingda_rock3_base.stl",
+		"platform": "mingda_magician_max_base.stl",
-		"platform_offset": [ -179, -108, 150]
+		"platform_offset": [ 0, 0, 4]
     }
 }

resources/definitions/mingda_magician_pro.def.json

@@ -4,9 +4,11 @@
     "inherits": "mingda_base",
     "overrides": {
         "machine_name": { "default_value": "Mingda Magician Pro" },
-		"machine_start_gcode": {
+		
-			"default_value":" G28 ; home all axes\n M117 ; Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface" 
+		"machine_start_gcode": { "default_value": " G28 ; home all axes\n M420 S1\n M117 ; Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface"},
-		},
+        
+		"machine_end_gcode": { "default_value": " G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y0 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n M84 ; disable motors\n M420 S0\n M106 S0 ; turn off fan" },
+		
         "machine_width": { "default_value": 400 },
         "machine_depth": { "default_value": 400 },
         "machine_height": { "default_value": 400 },
@@ -16,7 +18,7 @@
     "metadata": {
         "quality_definition": "mingda_base",
         "visible": true,
-        "platform": "mingda_d4pro_base.stl",
+        "platform": "mingda_magician_pro_base.stl",
-        "platform_offset": [ -177, -140, 170]
+        "platform_offset": [ 0, 0, -4]
     }
 }

resources/definitions/mingda_magician_x.def.json

@@ -4,6 +4,11 @@
     "inherits": "mingda_base",
     "overrides": {
         "machine_name": { "default_value": "Mingda Magician X" },
+		
+		"machine_start_gcode": { "default_value": " G28 ; home all axes\n M420 S1\n M117 ; Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface"},
+        
+		"machine_end_gcode": { "default_value": " G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y0 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n M84 ; disable motors\n M420 S0\n M106 S0 ; turn off fan" },
+		
         "machine_width": { "default_value": 230 },
         "machine_depth": { "default_value": 230 },
         "machine_height": { "default_value": 260 },
@@ -13,7 +18,7 @@
     "metadata": {
         "quality_definition": "mingda_base",
         "visible": true,
-        "platform": "mingda_d2_base.stl",
+        "platform": "mingda_magician_x_base.stl",
-        "platform_offset": [ -205, -77, 65]
+        "platform_offset": [ 0, 0, 0]
     }
 }

resources/quality/mingda/ABS/mingda_0.2_ABS_super.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.2mm Nozzle
 
 [values]
 wall_thickness = =line_width*8
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.2_ABS_ultra.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.2mm Nozzle
 
 [values]
 wall_thickness = =line_width*8
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.3_ABS_adaptive.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.3_ABS_low.inst.cfg

@@ -12,3 +12,7 @@ variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1
+raft_interface_thickness = 0.2
+raft_surface_thickness = 0.2

resources/quality/mingda/ABS/mingda_0.3_ABS_standard.inst.cfg

@@ -12,3 +12,6 @@ variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1
+raft_interface_thickness = =round(layer_height, 2)

resources/quality/mingda/ABS/mingda_0.3_ABS_super.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.4_ABS_adaptive.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.4_ABS_low.inst.cfg

@@ -12,3 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1
+raft_interface_thickness = 0.3

resources/quality/mingda/ABS/mingda_0.4_ABS_standard.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.4_ABS_super.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.5_ABS_adaptive.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.5_ABS_low.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.5_ABS_standard.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.5_ABS_super.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.6_ABS_standard.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.6mm Nozzle
 
 [values]
 wall_thickness = =line_width*3
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_0.8_ABS_draft.inst.cfg

@@ -12,3 +12,5 @@ variant = 0.8mm Nozzle
 
 [values]
 wall_thickness = =line_width*3
+
+raft_airgap = 0.1

resources/quality/mingda/ABS/mingda_1.0_ABS_draft.inst.cfg

@@ -12,3 +12,5 @@ variant = 1.0mm Nozzle
 
 [values]
 wall_thickness = =line_width*3
+
+raft_airgap = 0.1

resources/quality/mingda/PETG/mingda_0.3_PETG_low.inst.cfg

@@ -13,3 +13,6 @@ variant = 0.3mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
+raft_interface_thickness = 0.2
+raft_surface_thickness = 0.2

resources/quality/mingda/PETG/mingda_0.3_PETG_standard.inst.cfg

@@ -13,3 +13,5 @@ variant = 0.3mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
+raft_interface_thickness = =round(layer_height, 2)

resources/quality/mingda/PETG/mingda_0.4_PETG_low.inst.cfg

@@ -13,3 +13,5 @@ variant = 0.4mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
+raft_interface_thickness = 0.3

resources/quality/mingda/PLA/mingda_0.3_PLA_low.inst.cfg

@@ -11,3 +11,5 @@ material = generic_pla
 variant = 0.3mm Nozzle
 
 [values]
+raft_interface_thickness = 0.2
+raft_surface_thickness = 0.2

resources/quality/mingda/PLA/mingda_0.3_PLA_standard.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.3mm Nozzle
 
 [values]
+raft_interface_thickness = =round(layer_height, 2)

resources/quality/mingda/PLA/mingda_0.4_PLA_low.inst.cfg

@@ -11,3 +11,4 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+raft_interface_thickness = 0.3

resources/quality/mingda/TPU/mingda_0.3_TPU_standard.inst.cfg

@@ -11,3 +11,4 @@ material = generic_tpu
 variant = 0.3mm Nozzle
 
 [values]
+raft_interface_thickness = =round(layer_height, 2)

resources/quality/mingda/mingda_global_adaptive.inst.cfg

@@ -17,3 +17,17 @@ top_bottom_thickness = =layer_height_0+layer_height*4
 wall_thickness = =line_width*3
 support_interface_height = =layer_height*6
 adaptive_layer_height_enabled = true
+
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_sparse_density = 20
+
+speed_print = 60
+speed_layer_0 = 10
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_wall = =math.ceil(speed_print * 40 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+jerk_travel = 50
+raft_airgap = 0.18
+raft_base_thickness = =round(layer_height*1.5, 2)
+raft_interface_thickness = =round(layer_height*1.2, 2)

resources/quality/mingda/mingda_global_draft.inst.cfg

@@ -16,3 +16,21 @@ layer_height_0 = 0.32
 top_bottom_thickness = =layer_height_0+layer_height*3
 wall_thickness = =line_width*2
 support_interface_height = =layer_height*4
+
+jerk_travel = 20
+acceleration_print = 2000
+acceleration_wall = 1500
+acceleration_wall_0 = 1000
+acceleration_topbottom = 1000
+acceleration_travel = 2000
+
+infill_sparse_density = 10
+infill_line_width = =line_width*1
+
+speed_print = 50
+speed_wall = 50
+
+raft_airgap = 0.18
+raft_base_thickness = =round(layer_height*1.5, 2)
+raft_interface_thickness = =round(layer_height*1.2, 2)
+

resources/quality/mingda/mingda_global_low.inst.cfg

@@ -16,3 +16,20 @@ layer_height_0 = 0.28
 top_bottom_thickness = =layer_height_0+layer_height*3
 wall_thickness = =line_width*2
 support_interface_height = =layer_height*4
+
+jerk_travel = 20
+acceleration_print = 2000
+acceleration_wall = 1500
+acceleration_wall_0 = 1000
+acceleration_topbottom = 1000
+acceleration_travel = 2000
+
+infill_sparse_density = 10
+infill_line_width = =line_width*1
+
+speed_print = 50
+speed_wall = 50
+
+raft_airgap = 0.18
+raft_base_thickness = =round(layer_height*1.5, 2)
+raft_interface_thickness = =round(layer_height*1.2, 2)

resources/quality/mingda/mingda_global_standard.inst.cfg

@@ -16,3 +16,20 @@ layer_height_0 = 0.2
 top_bottom_thickness = =layer_height_0+layer_height*3
 wall_thickness = =line_width*3
 support_interface_height = =layer_height*5
+
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_sparse_density = 20
+
+speed_print = 60
+speed_layer_0 = 10
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_wall = =math.ceil(speed_print * 40 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+jerk_travel = 50
+
+raft_airgap = 0.18
+raft_base_thickness = =round(layer_height*1.5, 2)
+raft_interface_thickness = =round(layer_height*1.2, 2)

resources/quality/mingda/mingda_global_super.inst.cfg

@@ -16,3 +16,11 @@ layer_height_0 = 0.12
 top_bottom_thickness = =layer_height_0+layer_height*6
 wall_thickness = =line_width*3
 support_interface_height = =layer_height*8
+
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+infill_sparse_density = 20
+
+jerk_travel = 50
+raft_airgap = 0.18
+raft_base_thickness = =round(layer_height*1.5, 2)
+raft_interface_thickness = =round(layer_height*1.2, 2)

resources/quality/mingda/mingda_global_ultra.inst.cfg

@@ -16,3 +16,16 @@ layer_height_0 = 0.12
 top_bottom_thickness = =layer_height_0+layer_height*10
 wall_thickness = =line_width*3
 support_interface_height = =layer_height*12
+
+skin_overlap = 10
+speed_print = 50
+speed_layer_0 = 10
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 35 / 50)
+top_bottom_thickness = 1
+
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+jerk_travel = 50
+raft_airgap = 0.18
+raft_base_thickness = =round(layer_height*1.5, 2)
+raft_interface_thickness = =round(layer_height*1.2, 2)

resources/variants/mingda_1000pro_0.2.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/mingda_1000pro_0.3.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/mingda_1000pro_0.4.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/mingda_1000pro_0.5.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/mingda_1000pro_0.6.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/mingda_1000pro_0.8.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/mingda_1000pro_1.0.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = mingda_1000pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0

resources/variants/mingda_4h_0.2.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/mingda_4h_0.3.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/mingda_4h_0.4.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/mingda_4h_0.5.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/mingda_4h_0.6.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/mingda_4h_0.8.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/mingda_4h_1.0.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = mingda_4h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0

resources/variants/mingda_600pro_0.2.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/mingda_600pro_0.3.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/mingda_600pro_0.4.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/mingda_600pro_0.5.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/mingda_600pro_0.6.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/mingda_600pro_0.8.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/mingda_600pro_1.0.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = mingda_600pro
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0

resources/variants/mingda_6h_0.2.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/mingda_6h_0.3.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/mingda_6h_0.4.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/mingda_6h_0.5.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/mingda_6h_0.6.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/mingda_6h_0.8.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/mingda_6h_1.0.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = mingda_6h
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0