From 397c2666f0565df5812dea31a833d779c679c26b Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 12 Apr 2017 15:38:07 +0200 Subject: [PATCH] Optimise profiles for 0.8mm cores Sample testing confirms that these are equal to their originals. Nylon, PLA and PVA were already optimised, but ABS and CPE weren't. Now all are optimised except some 0.4mm core profiles. I'll see to those next. Note that the filament flow compensation setting is still wrong in these profiles (it was wrong in the original profiles as well). Contributes to issue CURA-3650. --- .../um3_aa0.8_ABS_Draft_Print.inst.cfg | 116 +++-------------- .../um3_aa0.8_ABS_Superdraft_Print.inst.cfg | 117 ++++------------- .../um3_aa0.8_ABS_Verydraft_Print.inst.cfg | 117 ++++------------- .../um3_aa0.8_CPE_Draft_Print.inst.cfg | 116 +++-------------- .../um3_aa0.8_CPE_Superdraft_Print.inst.cfg | 118 ++++-------------- .../um3_aa0.8_CPE_Verydraft_Print.inst.cfg | 117 ++++------------- .../um3_aa0.8_Nylon_Draft_Print.inst.cfg | 16 ++- .../um3_aa0.8_Nylon_Superdraft_Print.inst.cfg | 18 ++- .../um3_aa0.8_Nylon_Verydraft_Print.inst.cfg | 18 ++- .../um3_aa0.8_PLA_Draft_Print.inst.cfg | 16 +-- .../um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 16 +-- .../um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 16 +-- .../um3_bb0.8_PVA_Draft_Print.inst.cfg | 2 +- .../um3_bb0.8_PVA_Superdraft_Print.inst.cfg | 4 +- .../um3_bb0.8_PVA_Verydraft_Print.inst.cfg | 4 +- resources/variants/ultimaker3_aa0.8.inst.cfg | 43 ++++--- resources/variants/ultimaker3_bb0.8.inst.cfg | 24 +++- 17 files changed, 248 insertions(+), 630 deletions(-) diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg index 1cb122147f..aedf428807 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg @@ -1,96 +1,20 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -material = generic_abs_ultimaker3_AA_0.8 -weight = -2 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 7 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 90 -material_print_temperature = =default_material_print_temperature + 25 -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 16 -prime_tower_wipe_enabled = True -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 5 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 50 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +material = generic_abs_ultimaker3_AA_0.8 +weight = -2 + +[values] +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 25 +material_standby_temperature = 100 +speed_equalize_flow_enabled = False +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index b87cfde214..313754645c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -1,96 +1,21 @@ -[general] -version = 2 -name = Superdraft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = superdraft -material = generic_abs_ultimaker3_AA_0.8 -weight = -4 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 7 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.4 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 90 -material_print_temperature = =default_material_print_temperature + 30 -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 16 -prime_tower_wipe_enabled = True -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 5 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 50 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +[general] +version = 2 +name = Superdraft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = superdraft +material = generic_abs_ultimaker3_AA_0.8 +weight = -4 + +[values] +layer_height = 0.4 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 30 +material_standby_temperature = 100 +speed_equalize_flow_enabled = False +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg index d0f16f784e..f499b5bfa1 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -1,96 +1,21 @@ -[general] -version = 2 -name = Verydraft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = verydraft -material = generic_abs_ultimaker3_AA_0.8 -weight = -3 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 7 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.3 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 90 -material_print_temperature = =default_material_print_temperature + 27 -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 16 -prime_tower_wipe_enabled = True -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 5 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 50 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 40 / 50) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 +[general] +version = 2 +name = Verydraft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = verydraft +material = generic_abs_ultimaker3_AA_0.8 +weight = -3 + +[values] +layer_height = 0.3 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 27 +material_standby_temperature = 100 +speed_equalize_flow_enabled = False +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index 5f46b97486..7356969835 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -1,96 +1,20 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -material = generic_cpe_ultimaker3_AA_0.8 -weight = -2 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 15 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 7 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = =default_material_print_temperature + 15 -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 16 -prime_tower_wipe_enabled = True -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 5 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 40 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 25 / 40) -speed_wall = =math.ceil(speed_print * 30 / 40) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 \ No newline at end of file +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +material = generic_cpe_ultimaker3_AA_0.8 +weight = -2 + +[values] +brim_width = 15 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 15 +material_standby_temperature = 100 +speed_equalize_flow_enabled = False +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index fbb091c651..8e98a0fd9d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -1,96 +1,22 @@ -[general] -version = 2 -name = Superdraft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = superdraft -material = generic_cpe_ultimaker3_AA_0.8 -weight = -4 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 15 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 7 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.4 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = =default_material_print_temperature + 20 -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 16 -prime_tower_wipe_enabled = True -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 5 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 45 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 \ No newline at end of file +[general] +version = 2 +name = Superdraft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = superdraft +material = generic_cpe_ultimaker3_AA_0.8 +weight = -2 + +[values] +brim_width = 15 +layer_height = 0.4 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 20 +material_standby_temperature = 100 +speed_equalize_flow_enabled = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 30 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index 75b164735d..716ebbe5a5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -1,96 +1,21 @@ -[general] -version = 2 -name = Verydraft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = verydraft -material = generic_cpe_ultimaker3_AA_0.8 -weight = -3 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 15 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 7 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_before_walls = False -infill_line_width = =round(line_width * 0.6 / 0.7, 2) -infill_overlap = 0 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 25 / 25) -jerk_wall = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) -jerk_wall_x = =jerk_wall -layer_height = 0.3 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = =default_material_print_temperature + 17 -material_initial_print_temperature = =material_print_temperature - 5 -material_final_print_temperature = =material_print_temperature - 10 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 16 -prime_tower_wipe_enabled = True -retract_at_layer_change = True -retraction_amount = 6.5 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 5 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 40 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 25 / 40) -speed_wall = =math.ceil(speed_print * 30 / 40) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_pattern = zigzag -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_retraction_amount = 16.5 -top_bottom_thickness = 1.4 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =wall_line_width -wall_thickness = 2 \ No newline at end of file +[general] +version = 2 +name = Verydraft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = verydraft +material = generic_cpe_ultimaker3_AA_0.8 +weight = -2 + +[values] +brim_width = 15 +layer_height = 0.3 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 17 +material_standby_temperature = 100 +speed_equalize_flow_enabled = False +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index eb69e804c0..0ad9d1c637 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -10,17 +10,27 @@ material = generic_nylon_ultimaker3_AA_0.8 weight = -2 [values] +brim_line_count = 7 brim_width = 8.0 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 infill_before_walls = True -infill_pattern = triangles +infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 +ooze_shield_angle = 40 +prime_tower_size = 15 +raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 4a226996b3..338aa6746b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -7,21 +7,31 @@ definition = ultimaker3 type = quality quality_type = superdraft material = generic_nylon_ultimaker3_AA_0.8 -weight = -2 +weight = -4 [values] +brim_line_count = 7 brim_width = 8.0 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 infill_before_walls = True -infill_pattern = triangles +infill_line_width = =line_width layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 +ooze_shield_angle = 40 +prime_tower_size = 15 +raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 444aac8eda..b67e93e138 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -7,21 +7,31 @@ definition = ultimaker3 type = quality quality_type = verydraft material = generic_nylon_ultimaker3_AA_0.8 -weight = -2 +weight = -3 [values] +brim_line_count = 7 brim_width = 8.0 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 infill_before_walls = True -infill_pattern = triangles +infill_line_width = =line_width layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 +ooze_shield_angle = 40 +prime_tower_size = 15 +raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 74f7f47a4d..1d059f6687 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -7,28 +7,30 @@ definition = ultimaker3 type = quality quality_type = draft material = generic_pla_ultimaker3_AA_0.8 -weight = 0 +weight = -2 [values] -brim_line_count = =math.ceil(brim_width / skirt_brim_line_width) +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.535 / 0.75, 2) +infill_pattern = cubic infill_sparse_density = 80 line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -ooze_shield_angle = 60 -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -raft_margin = 15 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds +prime_tower_size = 15 +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 4702d382c7..a7045326ca 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -7,29 +7,31 @@ definition = ultimaker3 type = quality quality_type = superdraft material = generic_pla_ultimaker3_AA_0.8 -weight = 1 +weight = -4 [values] -brim_line_count = =math.ceil(brim_width / skirt_brim_line_width) +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.535 / 0.75, 2) +infill_pattern = cubic infill_sparse_density = 80 layer_height = 0.4 line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 -ooze_shield_angle = 60 -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -raft_margin = 15 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds +prime_tower_size = 15 +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 174882aa68..cbf783febd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -7,29 +7,31 @@ definition = ultimaker3 type = quality quality_type = verydraft material = generic_pla_ultimaker3_AA_0.8 -weight = 1 +weight = -3 [values] -brim_line_count = =math.ceil(brim_width / skirt_brim_line_width) +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.535 / 0.75, 2) +infill_pattern = cubic infill_sparse_density = 80 layer_height = 0.3 line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -ooze_shield_angle = 60 -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -raft_margin = 15 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds +prime_tower_size = 15 +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg index c02e307b47..17e406cdc8 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg @@ -11,4 +11,4 @@ material = generic_pva_ultimaker3_BB_0.8 [values] material_print_temperature = =default_material_print_temperature + 5 - +material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg index 84075aa4b9..7e87761349 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -6,9 +6,9 @@ definition = ultimaker3 [metadata] type = quality quality_type = superdraft -weight = -2 +weight = -4 material = generic_pva_ultimaker3_BB_0.8 [values] layer_height = 0.4 - +material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index db10f3d848..d79f0c6848 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -6,9 +6,9 @@ definition = ultimaker3 [metadata] type = quality quality_type = verydraft -weight = -2 +weight = -3 material = generic_pva_ultimaker3_BB_0.8 [values] layer_height = 0.3 - +material_standby_temperature = 100 diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index c73e22db20..2acaa9a98f 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -9,33 +9,44 @@ type = variant [values] acceleration_enabled = True +acceleration_layer_0 = =acceleration_topbottom +acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 -brim_line_count = 7 +acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) +acceleration_support_interface = =acceleration_topbottom +acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) +acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) +acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_fan_speed = 100 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_speed = 7 cool_fan_speed_max = 100 +cool_min_speed = 5 default_material_print_temperature = 200 infill_before_walls = False +infill_line_width = =round(line_width * 0.6 / 0.7, 2) infill_overlap = 0 -infill_pattern = cubic +infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True +jerk_layer_0 = =jerk_topbottom +jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 +jerk_support = =math.ceil(jerk_print * 15 / 25) +jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 25 / 25) jerk_wall = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) layer_height = 0.2 +layer_height_0 = =round(machine_nozzle_size / 1.5, 2) machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_size = 0.8 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -raft_acceleration = =acceleration_layer_0 -raft_margin = 10 +prime_tower_size = 16 retract_at_layer_change = True retraction_count_max = 25 retraction_extrusion_window = 1 @@ -45,20 +56,22 @@ retraction_hop_only_when_collides = True skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = 20 +speed_prime_tower = =speed_topbottom speed_print = 35 +speed_support = =speed_wall_0 +speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 35) +speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -support_angle = 70 +speed_wall_x = =speed_wall +support_angle = 60 support_bottom_distance = =support_z_distance / 2 -support_line_width = =line_width * 0.75 support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 1.5 +support_xy_distance = =wall_line_width_0 * 2.5 +support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = 2 - diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index a88c3ef6b7..8d8e2a16ed 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -9,9 +9,16 @@ type = variant [values] acceleration_enabled = True +acceleration_layer_0 = =acceleration_topbottom +acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 +acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) acceleration_support_interface = =math.ceil(acceleration_topbottom * 100 / 500) +acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) +acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) +acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 3 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed = 50 cool_min_speed = 5 infill_line_width = =round(line_width * 0.8 / 0.7, 2) @@ -19,12 +26,20 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True +jerk_layer_0 = =jerk_topbottom +jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 +jerk_support = =math.ceil(jerk_print * 15 / 25) jerk_support_interface = =math.ceil(jerk_topbottom * 1 / 5) +jerk_topbottom = =math.ceil(jerk_print * 5 / 25) +jerk_wall = =math.ceil(jerk_print * 10 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) layer_height = 0.2 +layer_height_0 = =round(machine_nozzle_size / 1.5, 2) +line_width = =machine_nozzle_size * 0.875 machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 -machine_nozzle_size = 0.8 material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 @@ -36,6 +51,7 @@ raft_interface_line_spacing = 0.5 raft_interface_line_width = 0.5 raft_interface_speed = 20 raft_interface_thickness = 0.2 +raft_jerk = =jerk_layer_0 raft_margin = 10 raft_speed = 25 raft_surface_layers = 1 @@ -48,9 +64,14 @@ retraction_min_travel = 5 retraction_prime_speed = 15 skin_overlap = 5 speed_layer_0 = 20 +speed_prime_tower = =speed_topbottom speed_print = 35 +speed_support = =speed_wall_0 speed_support_interface = =math.ceil(speed_topbottom * 15 / 20) +speed_topbottom = =math.ceil(speed_print * 20 / 35) +speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) +speed_wall_x = =speed_wall support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_stair_step_height = =layer_height @@ -71,4 +92,3 @@ top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 wall_thickness = 1 -