diff --git a/resources/definitions/vertex_delta_k8800.def.json b/resources/definitions/vertex_delta_k8800.def.json
new file mode 100644
index 0000000000..1c5cfab59b
--- /dev/null
+++ b/resources/definitions/vertex_delta_k8800.def.json
@@ -0,0 +1,65 @@
+{
+    "id": "K8800",
+    "name": "Vertex Delta K8800",
+    "version": 1,
+    "inherits": "fdmprinter.json",
+    "machine_settings": {
+        "machine_width": {
+            "default": 200
+        },
+        "machine_height": {
+            "default": 225
+        },
+        "machine_depth": {
+            "default": 200
+        },
+        "machine_center_is_zero": {
+            "default": true
+        },
+        "machine_shape": {
+            "default": "elliptic"
+        },
+        "machine_nozzle_size": {
+            "default": 0.35
+        },
+        "machine_head_shape_min_x": {
+            "default": 0
+        },
+        "machine_head_shape_min_y": {
+            "default": 0
+        },
+        "machine_head_shape_max_x": {
+            "default": 0
+        },
+        "machine_head_shape_max_y": {
+            "default": 0
+        },
+        "machine_nozzle_gantry_distance": {
+            "default": 0
+        },
+        "machine_nozzle_offset_x_1": {
+            "default": 0
+        },
+        "machine_nozzle_offset_y_1": {
+            "default": 0
+        },
+        "machine_gcode_flavor": {
+            "default": "RepRap"
+        },
+        "machine_start_gcode": {
+            "default": "; Vertex Delta Start Gcode\nM0 Is my nozzle clean?\nM400\nG28 ; Home extruder\nM106 S128 ; Start fan\nM104 T0 R130 ; Set cold nozzle\nM109 T0 R130 ; Wait for cold nozzle\nM117 Leveling bed...\nG29 ; Level Bed\nG1 X0 Y100 Z1 F2000\nG92 Z0.9 ; Set Z position (SET Z OFFSET HERE -> 1 - OFFSET)\nM107 ; Stop fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM104 T0 S{material_print_temperature}\nG92 E0 ; Reset extruder position\nM109 T0 S{material_print_temperature}\nM117 Priming nozzle...\nM83\nG1 E20 F100 ; purge/prime nozzle\nM82\nG92 E0 ; Reset extruder position\nG4 S3 ; Wait 3 seconds\nG1 Z5 F2000\nM117 Vertex Delta printing"
+        },
+        "machine_end_gcode": {
+            "default": "; Vertex Delta end code\nM107 ; Turn off fan\nG91 ; Relative positioning\nT0\nG1 E-1 F1500; Reduce filament pressure\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM300 S4000 P500\nM300 S3000 P500\nM300 S2000 P800\nG28\nM84 ; Turn steppers off"
+        }
+    },
+    "categories": {
+        "material": {
+            "settings": {
+                "material_bed_temperature": {
+                    "visible": true
+                }
+            }
+        }
+    }
+}
\ No newline at end of file