Add anycubic kobra go

resources/definitions/anycubic_kobra_go.def.json

@@ -0,0 +1,43 @@
+{
+    "version": 2,
+    "name": "Anycubic Kobra Go",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Kolja Lampe",
+        "manufacturer": "Anycubic",
+        "file_formats": "text/x-gcode",
+        "has_materials": true,
+        "preferred_material": "generic_pla",
+        "has_machine_quality": true,
+        "quality_definition": "anycubic_kobra_go",
+        "preferred_quality_type": "pla",
+        "machine_extruder_trains": {
+            "0": "anycubic_kobra_go_extruder_0"
+        },
+        "firmware_file": "MarlinChiron.hex"
+    },
+    "overrides": {
+        "machine_name": {
+            "default_value": "Anycubic Kobra Go"
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_width": {
+            "default_value": 222
+        },
+        "machine_height": {
+            "default_value": 250
+        },
+        "machine_depth": {
+            "default_value": 222
+        },
+        "machine_start_gcode": {
+            "default_value": "M140 S[first_layer_bed_temperature]; Heat bed\nM104 S[first_layer_temperature\n            ]; Heat extruder\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM190 S[first_layer_bed_temperature\n            ]; Wait for bed to get up to temperature\nM109 S[first_layer_temperature\n            ]; Wait for extruder to get up to temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X2 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X2.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X2.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 F2400 E-1\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
+        },
+        "machine_end_gcode": {
+            "default_value": "M400 ; Wait for current moves to finish\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F2400 E-1 ; Retract filament 3mm at 40mm/s to prevent stringing\nG0 F5000 Z20 ; Move Z Axis up 20mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG0 X0 Y220 F5000 ; Move Heat Bed to the front for easy print removal\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; Disable stepper motors\n; End of custom end GCode"
+        }
+    }
+}

resources/extruders/anycubic_kobra_go_extruder_0.def.json

@@ -0,0 +1,17 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "anycubic_kobra_go",
+        "position": "0"
+    },
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        }
+    }
+}

resources/quality/anycubic_kobra_go/anycubic_kobra_go_abs.inst.cfg

@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Normal
+definition = anycubic_kobra_go
+
+[metadata]
+setting_version = 20
+type = quality
+quality_type = abs
+weight = 0
+global_quality = True
+material = generic_abs
+
+[values]
+acceleration_print = 1000.0
+acceleration_travel = 3000.0
+bottom_layers = 6
+brim_width = 4.0
+infill_pattern = lines
+infill_sparse_density = 25
+material_final_print_temperature = 230
+material_initial_print_temperature = 230
+material_print_temperature = 235.0
+material_print_temperature_layer_0 = 235.0
+optimize_wall_printing_order = True
+speed_print = 50.0
+top_layers = 6
+z_seam_corner = z_seam_corner_inner
+z_seam_type = sharpest_corner
+z_seam_x = 111
+
+inset_direction = ='outside_in' if (True) else 'inside_out'
+layer_height = 0.2

resources/quality/anycubic_kobra_go/anycubic_kobra_go_pla.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = Normal
+definition = anycubic_kobra_go
+
+[metadata]
+setting_version = 20
+type = quality
+quality_type = pla
+weight = -2
+global_quality = True
+material = generic_pla
+
+[values]
+bottom_layers = 6
+brim_width = 7.0
+infill_pattern = lines
+infill_sparse_density = 15
+material_final_print_temperature = 185
+material_initial_print_temperature = 185
+material_print_temperature = 190
+optimize_wall_printing_order = True
+speed_print = 50.0
+top_layers = 6
+z_seam_corner = z_seam_corner_any
+z_seam_type = sharpest_corner
+z_seam_x = 111
+
+inset_direction = ='outside_in' if (True) else 'inside_out'
+layer_height = 0.2

resources/quality/anycubic_kobra_go/anycubic_kobra_go_tpu.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal
+definition = anycubic_kobra_go
+
+[metadata]
+setting_version = 20
+type = quality
+quality_type = tpu
+weight = 1
+global_quality = True
+material = generic_tpu
+
+[values]
+acceleration_print = 1000.0
+acceleration_travel = 3000.0
+bottom_layers = 6
+brim_width = 7.0
+infill_pattern = lines
+infill_sparse_density = 15
+material_final_print_temperature = 190
+material_initial_print_temperature = 190
+material_print_temperature = 190
+material_print_temperature_layer_0 = 190
+optimize_wall_printing_order = True
+retraction_amount = 8
+retraction_speed = 40
+speed_print = 50.0
+top_layers = 6
+z_seam_corner = z_seam_corner_inner
+z_seam_type = sharpest_corner
+z_seam_x = 111
+
+inset_direction = ='outside_in' if (False) else 'inside_out'
+layer_height = 0.2