Applied printer-linter format

2025-08-12 19:39:03 +08:00 · 2023-03-27 08:58:42 +00:00 · 2023-03-27 08:58:42 +00:00 · 3d88c3c105
commit 3d88c3c105
parent b88576bd25
50 changed files with 73 additions and 20 deletions
--- a/resources/definitions/lnl3d_base.def.json
+++ b/resources/definitions/lnl3d_base.def.json
@ -51,13 +51,13 @@
        "machine_max_acceleration_x": { "value": 500 },
        "machine_max_acceleration_y": { "value": 500 },
        "machine_max_acceleration_z": { "value": 100 },
-        "machine_max_jerk_e": { "value": 5 },
-        "machine_max_jerk_xy": { "value": 10 },
-        "machine_max_jerk_z": { "value": 0.4 },
        "machine_max_feedrate_e": { "value": 80 },
        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
        "machine_max_feedrate_z": { "value": 10 },
+        "machine_max_jerk_e": { "value": 5 },
+        "machine_max_jerk_xy": { "value": 10 },
+        "machine_max_jerk_z": { "value": 0.4 },
        "machine_start_gcode": { "default_value": "G21              ;metric values\nG90              ;absolute positioning\nM82              ;set extruder to absolute mode\nM107             ;start with the fan off\nG28              ;move to min endstops\nG92 E0           ;reset extruder\nG1 E15 F1500     ;move extruder 15mm\nG1 Z15.0 F3000   ;move the header up 15mm\nM117 printing... ;LCD message" },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
@ -79,18 +79,18 @@
        "retraction_hop_enabled": { "value": "False" },
        "retraction_prime_speed":
        {
-            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
-            "maximum_value": 200
+            "maximum_value": 200,
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
        },
        "retraction_retract_speed":
        {
-            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
-            "maximum_value": 200
+            "maximum_value": 200,
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
        },
        "retraction_speed":
        {
-            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
-            "maximum_value": 200
+            "maximum_value": 200,
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
        },
        "skin_overlap": { "value": 25 },
        "skirt_line_count": { "value": 2 },
@ -123,8 +123,8 @@
        "travel_retract_before_outer_wall": { "value": true },
        "wall_0_wipe_dist": { "value": 0.0 },
        "wall_thickness": { "value": "line_width * 2" },
-        "z_seam_type": { "value": "'back'" },
        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
+        "z_seam_type": { "value": "'back'" },
        "zig_zaggify_infill": { "value": true }
    }
 }
--- a/resources/definitions/lnl3d_d3.def.json
+++ b/resources/definitions/lnl3d_d3.def.json
@ -6,7 +6,11 @@
    {
        "visible": true,
        "platform": "lnl3d_d3.stl",
-        "platform_offset": [ 0, 0, 0 ]
+        "platform_offset": [
+            0,
+            0,
+            0
+        ]
    },
    "overrides":
    {
--- a/resources/definitions/lnl3d_d3_vulcan.def.json
+++ b/resources/definitions/lnl3d_d3_vulcan.def.json
@ -6,7 +6,11 @@
    {
        "visible": true,
        "platform": "lnl3d_d3.stl",
-        "platform_offset": [ 0, 0, 0 ]
+        "platform_offset": [
+            0,
+            0,
+            0
+        ]
    },
    "overrides":
    {
--- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_super.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_super.inst.cfg
@ -13,3 +13,4 @@ variant = 0.2mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*8
+
--- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_ultra.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_ultra.inst.cfg
@ -13,3 +13,4 @@ variant = 0.2mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*8
+
--- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_super.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_super.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.2mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_ultra.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_ultra.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.2mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_adaptive.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_adaptive.inst.cfg
@ -13,3 +13,4 @@ variant = 0.4mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_low.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_low.inst.cfg
@ -13,3 +13,4 @@ variant = 0.4mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_standard.inst.cfg
@ -13,3 +13,4 @@ variant = 0.4mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_super.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_super.inst.cfg
@ -13,3 +13,4 @@ variant = 0.4mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_adaptive.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_adaptive.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_low.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_low.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_standard.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_super.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_super.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_adaptive.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_adaptive.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_standard.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_super.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_super.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.4mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PETG_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PETG_standard.inst.cfg
@ -13,3 +13,4 @@ variant = 0.6mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*3
+
--- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_draft.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_draft.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.6mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_low.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_low.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.6mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_standard.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.6mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_TPU_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_TPU_standard.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.6mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.8_generic_PETG_draft.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.8_generic_PETG_draft.inst.cfg
@ -13,3 +13,4 @@ variant = 0.8mm Nozzle
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*3
+
--- a/resources/quality/lnl3d/lnl3d_base_0.8_generic_PLA_draft.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.8_generic_PLA_draft.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.8mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_0.8_generic_TPU_draft.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_0.8_generic_TPU_draft.inst.cfg
@ -11,3 +11,4 @@ type = quality
 variant = 0.8mm Nozzle

 [values]
+
--- a/resources/quality/lnl3d/lnl3d_base_global_adaptive.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_global_adaptive.inst.cfg
@ -17,3 +17,4 @@ layer_height_0 = 0.20
 support_interface_height = =layer_height*6
 top_bottom_thickness = =layer_height_0+layer_height*4
 wall_thickness = =line_width*3
+
--- a/resources/quality/lnl3d/lnl3d_base_global_draft.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_global_draft.inst.cfg
@ -16,3 +16,4 @@ layer_height_0 = 0.32
 support_interface_height = =layer_height*4
 top_bottom_thickness = =layer_height_0+layer_height*3
 wall_thickness = =line_width*2
+
--- a/resources/quality/lnl3d/lnl3d_base_global_low.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_global_low.inst.cfg
@ -16,3 +16,4 @@ layer_height_0 = 0.28
 support_interface_height = =layer_height*4
 top_bottom_thickness = =layer_height_0+layer_height*3
 wall_thickness = =line_width*2
+
--- a/resources/quality/lnl3d/lnl3d_base_global_standard.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_global_standard.inst.cfg
@ -16,3 +16,4 @@ layer_height_0 = 0.2
 support_interface_height = =layer_height*4
 top_bottom_thickness = =layer_height_0+layer_height*3
 wall_thickness = =line_width*2
+
--- a/resources/quality/lnl3d/lnl3d_base_global_super.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_global_super.inst.cfg
@ -16,3 +16,4 @@ layer_height_0 = 0.12
 support_interface_height = =layer_height*8
 top_bottom_thickness = =layer_height_0+layer_height*6
 wall_thickness = =line_width*3
+
--- a/resources/quality/lnl3d/lnl3d_base_global_ultra.inst.cfg
+++ b/resources/quality/lnl3d/lnl3d_base_global_ultra.inst.cfg
@ -16,3 +16,4 @@ layer_height_0 = 0.12
 support_interface_height = =layer_height*12
 top_bottom_thickness = =layer_height_0+layer_height*10
 wall_thickness = =line_width*3
+
--- a/resources/variants/lnl3d/lnl3d_d3_0.2.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_0.2.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.2
+
--- a/resources/variants/lnl3d/lnl3d_d3_0.4.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_0.4.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.4
+
--- a/resources/variants/lnl3d/lnl3d_d3_0.6.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_0.6.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.6
+
--- a/resources/variants/lnl3d/lnl3d_d3_0.8.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_0.8.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.8
+
--- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.2
+
--- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.4
+
--- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.6
+
--- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.8
+
--- a/resources/variants/lnl3d/lnl3d_d5_0.2.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d5_0.2.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.2
+
--- a/resources/variants/lnl3d/lnl3d_d5_0.4.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d5_0.4.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.4
+
--- a/resources/variants/lnl3d/lnl3d_d5_0.6.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d5_0.6.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.6
+
--- a/resources/variants/lnl3d/lnl3d_d5_0.8.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d5_0.8.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.8
+
--- a/resources/variants/lnl3d/lnl3d_d6_0.2.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d6_0.2.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.2
+
--- a/resources/variants/lnl3d/lnl3d_d6_0.4.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d6_0.4.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.4
+
--- a/resources/variants/lnl3d/lnl3d_d6_0.6.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d6_0.6.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.6
+
--- a/resources/variants/lnl3d/lnl3d_d6_0.8.inst.cfg
+++ b/resources/variants/lnl3d/lnl3d_d6_0.8.inst.cfg
@ -10,3 +10,4 @@ type = variant

 [values]
 machine_nozzle_size = 0.8
+