Update setting version

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS-X_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS-X_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS-X_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ACETATE_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ACETATE_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ACETATE_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ASA-X_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ASA-X_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ASA-X_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_A.inst.cfg

@@ -4,11 +4,11 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
-material = emotiontech_copa	
+material = emotiontech_copa
 variant = Haute température 0.4
 
 [values]
@@ -59,4 +59,4 @@ bridge_skin_material_flow = 60
 bridge_skin_density = 80
 bridge_fan_speed = 80
 meshfix_maximum_resolution = 0.5
-meshfix_maximum_deviation = 0.04
+meshfix_maximum_deviation = 0.04

resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -59,4 +59,4 @@ bridge_skin_material_flow = 60
 bridge_skin_density = 80
 bridge_fan_speed = 80
 meshfix_maximum_resolution = 0.5
-meshfix_maximum_deviation = 0.04
+meshfix_maximum_deviation = 0.04

resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -59,4 +59,4 @@ bridge_skin_material_flow = 60
 bridge_skin_density = 80
 bridge_fan_speed = 80
 meshfix_maximum_resolution = 0.5
-meshfix_maximum_deviation = 0.04
+meshfix_maximum_deviation = 0.04

resources/quality/strateo3d/HT0.4/s3d_ht0.4_HIPS_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -47,4 +47,4 @@ support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_HIPS_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -47,4 +47,4 @@ support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_HIPS_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -47,4 +47,4 @@ support_xy_distance_overhang = =line_width*0
 support_offset = 3
 support_pattern = grid
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PC_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PC_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PC_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PEKK_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -55,4 +55,4 @@ bridge_wall_material_flow = 185
 bridge_skin_speed = =bridge_wall_speed
 bridge_skin_material_flow = =bridge_wall_material_flow
 bridge_fan_speed = 100
-bridge_enable_more_layers = False
+bridge_enable_more_layers = False

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PETG_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PETG_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PETG_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 1.7
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 1
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_HT_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -52,4 +52,4 @@ support_interface_density = 100
 prime_tower_enable = True
 meshfix_maximum_resolution = 0.5
 meshfix_maximum_deviation = 0.04
-cool_lift_head = True
+cool_lift_head = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_HT_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -51,4 +51,4 @@ support_interface_density = 100
 prime_tower_enable = True
 meshfix_maximum_resolution = 0.5
 meshfix_maximum_deviation = 0.04
-cool_lift_head = True
+cool_lift_head = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_HT_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -51,4 +51,4 @@ support_interface_density = 100
 prime_tower_enable = True
 meshfix_maximum_resolution = 0.5
 meshfix_maximum_deviation = 0.04
-cool_lift_head = True
+cool_lift_head = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_TPU98A_A.inst.cfg

@@ -4,7 +4,7 @@ name = A
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = a
 weight = 1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 0.5
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_TPU98A_B.inst.cfg

@@ -4,7 +4,7 @@ name = B
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = b
 weight = 0
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 0.5
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_TPU98A_C.inst.cfg

@@ -4,7 +4,7 @@ name = C
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = quality
 quality_type = c
 weight = -1
@@ -44,4 +44,4 @@ support_xy_distance = =line_width * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_offset = 0.5
 support_interface_density = 100
-prime_tower_enable = True
+prime_tower_enable = True

resources/variants/strateo3d_haute_temperature_04.inst.cfg

@@ -4,7 +4,7 @@ version = 4
 definition = strateo3d
 
 [metadata]
-setting_version = 16
+setting_version = 17
 type = variant
 hardware_type = nozzle