From 404551e30a25109fc84e6b9f2d37cbf464f1ccd7 Mon Sep 17 00:00:00 2001 From: Mark Burton Date: Wed, 4 Jul 2018 11:49:08 +0100 Subject: [PATCH] Remove bridge_wall_max_overhang - no longer required with new overhang settings. # Conflicts: # resources/definitions/fdmprinter.def.json --- resources/definitions/fdmprinter.def.json | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 1b8f333509..be99b2fd39 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6479,18 +6479,6 @@ "enabled": "bridge_settings_enabled", "settable_per_mesh": true }, - "bridge_wall_max_overhang": - { - "label": "Bridge Wall Max Overhang", - "description": "The maximum allowed width of the region of air below a wall line before the wall is printed using bridge settings. Expressed as a percentage of the wall line width. When the air gap is wider than this, the wall line is printed using the bridge settings. Otherwise, the wall line is printed using the normal settings. The lower the value, the more likely it is that overhung wall lines will be printed using bridge settings.", - "unit": "%", - "default_value": 100, - "type": "float", - "minimum_value": "0", - "maximum_value": "100", - "enabled": "bridge_settings_enabled", - "settable_per_mesh": true - }, "bridge_wall_coast": { "label": "Bridge Wall Coasting",