diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index e7b9b6255e..826960a621 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -90,6 +90,7 @@ "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, + "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, @@ -109,7 +110,9 @@ "material_bed_temperature": { "maximum_value": "115" }, "material_bed_temperature_layer_0": { "maximum_value": "115" }, "material_standby_temperature": { "value": "100" }, + "meshfix_maximum_resolution": { "value": "0.04" }, "multiple_mesh_overlap": { "value": "0" }, + "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "default_value": true }, "raft_airgap": { "value": "0" }, "raft_base_thickness": { "value": "0.3" }, @@ -120,6 +123,7 @@ "raft_margin": { "value": "10" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "2" }, + "retraction_combing": { "default_value": "noskin" }, "retraction_count_max": { "value": "10" }, "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 8c6e7bd782..a32d9268d3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -13,6 +13,7 @@ setting_version = 4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 @@ -20,9 +21,9 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 speed_layer_0 = 20 -speed_topbottom = =math.ceil(speed_print * 35 / 70) -speed_wall = =math.ceil(speed_print * 50 / 70) -speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +speed_topbottom = =math.ceil(speed_print * 40 / 70) +speed_wall = =math.ceil(speed_print * 55 / 70) +speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 1 wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index db441015a8..30b7d44d4e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -13,6 +13,7 @@ setting_version = 4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index 61807490e9..da62ce2e3f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -14,6 +14,7 @@ setting_version = 4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index d7254b854d..04707735f5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ setting_version = 4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 6116dc1bda..f6828f88fb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -18,11 +18,10 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 -infill_pattern = tetrahedral -infill_sparse_density = 96 +infill_pattern = cross_3d +infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 1da5d0fec8..80be26d24c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -18,11 +18,10 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 -infill_pattern = tetrahedral -infill_sparse_density = 96 +infill_pattern = cross_3d +infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 1938e1c26c..53044e1805 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -18,11 +18,10 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 -infill_pattern = tetrahedral -infill_sparse_density = 96 +infill_pattern = cross_3d +infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 3c4303e017..8b3c3e56c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -15,8 +15,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.535 / 0.75, 2) -infill_pattern = cubic +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -25,6 +25,12 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 5509f42aae..2fe8f7c6f9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.535 / 0.75, 2) -infill_pattern = cubic +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles layer_height = 0.4 line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 @@ -27,6 +27,12 @@ material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True raft_margin = 10 +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 645c3fe3ef..9072e0c60f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.535 / 0.75, 2) -infill_pattern = cubic +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles layer_height = 0.3 line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 @@ -26,6 +26,12 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 726ab82867..d5d7479a0e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,11 +15,10 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -gradual_infill_steps = 5 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) -infill_pattern = tetrahedral -infill_sparse_density = 80 +infill_pattern = cross_3d +infill_sparse_density = 10 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 269725daa9..86c6a3df77 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,11 +15,10 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -gradual_infill_steps = 5 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) -infill_pattern = tetrahedral -infill_sparse_density = 80 +infill_pattern = cross_3d +infill_sparse_density = 10 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index dd1737433a..8af3edcddd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,11 +15,10 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -gradual_infill_steps = 5 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) -infill_pattern = tetrahedral -infill_sparse_density = 80 +infill_pattern = cross_3d +infill_sparse_density = 10 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)