From f535ed29adb45a004951431071b503c21c71162c Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 15:31:09 +0100 Subject: [PATCH 1/9] Slight meshfix resolution change By changing the meshfix resolution from 0.01 to 0.04 mm, we change the minimum out wall line pieces and can have a more continuous printhead movement. Also decreases Gcode size by around 30% for very high detail models. --- resources/definitions/ultimaker3.def.json | 1 + 1 file changed, 1 insertion(+) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index e7b9b6255e..76fa24b01c 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -109,6 +109,7 @@ "material_bed_temperature": { "maximum_value": "115" }, "material_bed_temperature_layer_0": { "maximum_value": "115" }, "material_standby_temperature": { "value": "100" }, + "meshfix_maximum_resolution": { "value": "0.04" }, "multiple_mesh_overlap": { "value": "0" }, "prime_tower_enable": { "default_value": true }, "raft_airgap": { "value": "0" }, From ca83089eff9f9ed3b8a37b1d593993662cb27e0c Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 15:32:59 +0100 Subject: [PATCH 2/9] Combing to "No Skin" This will remove the lines "printed" on top of flat top surfaces. For all UM3(e) profiles. --- resources/definitions/ultimaker3.def.json | 1 + 1 file changed, 1 insertion(+) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 76fa24b01c..cb8159b6b4 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -121,6 +121,7 @@ "raft_margin": { "value": "10" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "2" }, + "retraction_combing": { "default_value": "noskin" }, "retraction_count_max": { "value": "10" }, "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, From bc0a4cdc1722b389e7fcea12834b2caaf0facf72 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 15:35:09 +0100 Subject: [PATCH 3/9] Initial layer line width increase Increasing the initial layer line width both increases print speed, and results in more reliable bed adhesion. --- resources/definitions/ultimaker3.def.json | 1 + 1 file changed, 1 insertion(+) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index cb8159b6b4..562a56d652 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -90,6 +90,7 @@ "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, + "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, From 34c0a09047133c7e2b1758cd135c5aa80c6a1e1c Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 15:37:05 +0100 Subject: [PATCH 4/9] Optimize wall printing order This setting will make a lot of more prints more logical in printing order, especially when many small features are printed. --- resources/definitions/ultimaker3.def.json | 1 + 1 file changed, 1 insertion(+) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 562a56d652..a503cb7739 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -112,6 +112,7 @@ "material_standby_temperature": { "value": "100" }, "meshfix_maximum_resolution": { "value": "0.04" }, "multiple_mesh_overlap": { "value": "0" }, + "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "default_value": true }, "raft_airgap": { "value": "0" }, "raft_base_thickness": { "value": "0.3" }, From 014c2628bb868d161816136d26b0db4c4669a195 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 15:57:33 +0100 Subject: [PATCH 5/9] PLA 0.4mm profiles Infill thickness change and Fast Quality Speedup Increasing the speed of the Fast Quality prints, and slightly reducing the Infill Line Width. --- .../quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg | 7 ++++--- .../quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg | 1 + .../quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg | 1 + .../ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg | 1 + 4 files changed, 7 insertions(+), 3 deletions(-) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 8c6e7bd782..a32d9268d3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -13,6 +13,7 @@ setting_version = 4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 @@ -20,9 +21,9 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 speed_layer_0 = 20 -speed_topbottom = =math.ceil(speed_print * 35 / 70) -speed_wall = =math.ceil(speed_print * 50 / 70) -speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +speed_topbottom = =math.ceil(speed_print * 40 / 70) +speed_wall = =math.ceil(speed_print * 55 / 70) +speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 1 wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index db441015a8..30b7d44d4e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -13,6 +13,7 @@ setting_version = 4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index 61807490e9..da62ce2e3f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -14,6 +14,7 @@ setting_version = 4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index d7254b854d..04707735f5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ setting_version = 4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 From 97c96ab2da07e3c397f309d7501a1ec237c7d7f5 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 16:09:57 +0100 Subject: [PATCH 6/9] PLA 0.8mm Faster printing Optimization for faster printing with the 0.8mm profiles for PLA. Also removed retract at layer change for less artifacts, and changed infill pattern to triangular for more unity between profiles. --- .../quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg | 6 ++++-- .../ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 6 ++++-- .../ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 6 ++++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 3c4303e017..09e8539b03 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -15,8 +15,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.535 / 0.75, 2) -infill_pattern = cubic +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 5509f42aae..2217dee344 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.535 / 0.75, 2) -infill_pattern = cubic +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles layer_height = 0.4 line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 @@ -27,6 +27,8 @@ material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True raft_margin = 10 +retract_at_layer_change = False +speed_print = 45 support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 645c3fe3ef..0bd3f9751a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.535 / 0.75, 2) -infill_pattern = cubic +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles layer_height = 0.3 line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 @@ -26,6 +26,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' From ece88bd54dfb852cd86d28db1bb203ada748c7c1 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 16:14:00 +0100 Subject: [PATCH 7/9] Cross3D infill for TPU Flexibility Changed infill to Cross3D 10% (no gradual) for a more isotropic flexibility of parts. Cross3D also prints without travels (if possible) and looks great. --- .../quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg | 5 ++--- .../quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg | 5 ++--- .../quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg | 5 ++--- .../quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg | 5 ++--- .../ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 5 ++--- .../ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 5 ++--- 6 files changed, 12 insertions(+), 18 deletions(-) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 6116dc1bda..f6828f88fb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -18,11 +18,10 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 -infill_pattern = tetrahedral -infill_sparse_density = 96 +infill_pattern = cross_3d +infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 1da5d0fec8..80be26d24c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -18,11 +18,10 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 -infill_pattern = tetrahedral -infill_sparse_density = 96 +infill_pattern = cross_3d +infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 1938e1c26c..53044e1805 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -18,11 +18,10 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -gradual_infill_steps = 4 infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_overlap = 0 -infill_pattern = tetrahedral -infill_sparse_density = 96 +infill_pattern = cross_3d +infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 726ab82867..d5d7479a0e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,11 +15,10 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -gradual_infill_steps = 5 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) -infill_pattern = tetrahedral -infill_sparse_density = 80 +infill_pattern = cross_3d +infill_sparse_density = 10 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 269725daa9..86c6a3df77 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,11 +15,10 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -gradual_infill_steps = 5 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) -infill_pattern = tetrahedral -infill_sparse_density = 80 +infill_pattern = cross_3d +infill_sparse_density = 10 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index dd1737433a..8af3edcddd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,11 +15,10 @@ brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 gradual_infill_step_height = =4 * layer_height -gradual_infill_steps = 5 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) -infill_pattern = tetrahedral -infill_sparse_density = 80 +infill_pattern = cross_3d +infill_sparse_density = 10 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) jerk_support = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) From 4f6362f3f527f01125cc3eef47b6a9d035465be1 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 7 Feb 2018 16:51:49 +0100 Subject: [PATCH 8/9] PLA 0.8mm speeds respecified Fixed speeds after breaking them in the previous commit (97c96ab) --- .../quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg | 4 ++++ .../ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 4 ++++ .../quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 09e8539b03..8b3c3e56c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -27,6 +27,10 @@ material_standby_temperature = 100 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 2217dee344..2fe8f7c6f9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -29,6 +29,10 @@ prime_tower_enable = True raft_margin = 10 retract_at_layer_change = False speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 0bd3f9751a..9072e0c60f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -28,6 +28,10 @@ material_standby_temperature = 100 prime_tower_enable = True retract_at_layer_change = False speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 support_line_width = =line_width * 0.75 support_pattern = ='triangles' From b6c48e7fb9611968a33f355d4ec65284ce70d331 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Thu, 8 Feb 2018 08:58:48 +0100 Subject: [PATCH 9/9] Replaced tabs by spaces Thanks Aldo! --- resources/definitions/ultimaker3.def.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index a503cb7739..826960a621 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -90,7 +90,7 @@ "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, - "initial_layer_line_width_factor": { "value": "120" }, + "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, @@ -110,7 +110,7 @@ "material_bed_temperature": { "maximum_value": "115" }, "material_bed_temperature_layer_0": { "maximum_value": "115" }, "material_standby_temperature": { "value": "100" }, - "meshfix_maximum_resolution": { "value": "0.04" }, + "meshfix_maximum_resolution": { "value": "0.04" }, "multiple_mesh_overlap": { "value": "0" }, "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "default_value": true },