Merge pull request #13992 from just-trey/master

tune in settings for AnkerMake M5 Definitions

contributes to CURA-10008

resources/definitions/ankermake_m5.def.json

@@ -2,8 +2,7 @@
   "version": 2,
   "name": "AnkerMake M5",
   "inherits": "fdmprinter",
-    "metadata":
+  "metadata": {
-    {
     "visible": true,
     "author": "just-trey",
     "manufacturer": "AnkerMake",
@@ -15,55 +14,98 @@
     "preferred_material": "generic_pla",
     "preferred_quality_type": "normal"
   },
-    "overrides":
+
-    {
+  "overrides": {
-        "acceleration_print": { "value": "2500" },
-        "adhesion_type": { "default_value": "skirt" },
-        "cool_min_layer_time": { "value": 6 },
-        "cool_min_speed": { "value": 30 },
-        "gantry_height": { "value": 25 },
-        "machine_depth": { "default_value": 235 },
-        "machine_end_gcode": { "default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84" },
-        "machine_heated_bed": { "default_value": true },
-        "machine_height": { "default_value": 250 },
     "machine_name": { "default_value": "AnkerMake M5" },
-        "machine_start_gcode": { "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)" },
+    "machine_start_gcode": {
-        "machine_width": { "default_value": 235 },
+      "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)"
-        "material_bed_temperature": { "maximum_value_warning": "110" },
-        "material_bed_temperature_layer_0":
-        {
-            "maximum_value_warning": "110",
-            "value": "material_bed_temperature + 5"
     },
     "material_diameter": { "default_value": 1.75 },
-        "material_flow_layer_0": { "value": 120 },
+    "machine_width": { "default_value": 235 },
-        "material_print_temperature": { "maximum_value_warning": "260" },
+    "machine_depth": { "default_value": 235 },
-        "material_print_temperature_layer_0":
+    "machine_height": { "default_value": 250 },
-        {
+    "machine_heated_bed": { "default_value": true },
-            "maximum_value_warning": "260",
+    "gantry_height": { "value": 25 },
-            "value": "material_print_temperature + 5"
+
-        },
+    "xy_offset_layer_0": { "value": -0.2 },
-        "retraction_amount": { "default_value": 1.5 },
+    "hole_xy_offset": { "value": 0.2 },
-        "retraction_combing": { "value": "infill" },
+
-        "retraction_speed": { "default_value": 70 },
+    "top_bottom_thickness": { "value": "layer_height * 4" },
     "skin_monotonic": { "default_value": true },
+
+    "infill_sparse_density": { "value": 25 },
+    "infill_pattern": {
+      "value": "'lines' if infill_sparse_density >= 25 else 'grid'"
+    },
+    "zig_zaggify_infill": {
+      "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'"
+    },
+
+    "material_print_temperature": {
+      "maximum_value_warning": "260"
+    },
+    "material_print_temperature_layer_0": {
+      "value": "material_print_temperature + 5",
+      "maximum_value_warning": "270"
+    },
+    "material_initial_print_temperature": {
+      "value": "material_print_temperature"
+    },
+    "material_final_print_temperature": {
+      "value": "material_print_temperature"
+    },
+    "material_bed_temperature": { "maximum_value_warning": "110" },
+    "material_bed_temperature_layer_0": { "maximum_value_warning": "110" },
+    "skin_material_flow": { "value": 97 },
+    "material_flow_layer_0": { "value": 115 },
+
+    "speed_print": { "value": 250.0, "maximum_value_warning": 255 },
     "speed_infill": { "maximum_value_warning": 255 },
-        "speed_print":
+    "speed_wall": { "value": 150.0, "maximum_value_warning": 255 },
-        {
+    "speed_wall_x": { "value": 250.0, "maximum_value_warning": 255 },
-            "maximum_value_warning": 255,
+    "speed_support": { "maximum_value_warning": 255 },
-            "value": 250.0
+    "speed_support_infill": { "maximum_value_warning": 255 },
-        },
+    "speed_support_interface": { "maximum_value_warning": 255 },
+    "speed_support_roof": { "maximum_value_warning": 255 },
+    "speed_support_bottom": { "maximum_value_warning": 255 },
     "speed_topbottom": { "value": 150.0 },
+    "acceleration_print": { "value": "2500" },
     "speed_travel": { "value": 250.0 },
-        "speed_wall":
+
-        {
+    "retraction_amount": { "default_value": 1.5 },
-            "maximum_value_warning": 255,
+    "retraction_speed": { "default_value": 60 },
-            "value": 150.0
+    "retraction_combing": {
+      "value": "'off' if retraction_hop_enabled else 'infill'"
     },
-        "speed_wall_x":
+    "retraction_hop": { "value": 0.2 },
-        {
+
-            "maximum_value_warning": 255,
+    "cool_min_layer_time": { "value": 6 },
-            "value": 250.0
+    "cool_min_speed": { "value": 30 },
-        }
+
+    "support_angle": {
+      "value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))"
+    },
+    "support_infill_rate": {
+      "value": "0 if support_enable and support_structure == 'tree' else 20"
+    },
+    "support_z_distance": { "value": "layer_height * 2" },
+    "support_xy_distance": { "value": "wall_line_width_0 * 2" },
+    "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
+    "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+    "support_brim_width": { "value": 4.0 },
+    "minimum_support_area": { "value": 2 },
+    "support_interface_enable": { "value": true },
+    "support_roof_enable": { "value": true },
+    "support_interface_skip_height": { "value": 0.2 },
+    "support_interface_density": { "value": 33.333 },
+    "support_interface_pattern": { "value": "'grid'" },
+    "minimum_interface_area": { "value": 10 },
+
+    "adhesion_type": { "default_value": "skirt" },
+    "skirt_line_count": { "value": 3 },
+
+    "wall_overhang_angle": { "value": 55 },
+    "wall_overhang_speed_factor": { "value": 55 },
+    "small_hole_max_size": { "value": 10 }
   }
 }

resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg

@@ -12,5 +12,4 @@ weight = 0
 
 [values]
 layer_height = 0.2
-layer_height_0 = 0.24
+layer_height_0 = 0.2
-