Merge branch 'master' into qt6_beyond_the_splash

resources/definitions/fdmprinter.def.json

@@ -1197,7 +1197,7 @@
                     "minimum_value_warning": ".5 * max(wall_line_width_0, wall_line_width_x)",
                     "maximum_value_warning": "min(wall_line_width_0, wall_line_width_x)",
                     "default_value": 0.3,
-                    "value": "machine_nozzle_size * .75",
+                    "value": "machine_nozzle_size * .85",
                     "type": "float",
                     "settable_per_mesh": true,
                     "children":
@@ -1281,7 +1281,7 @@
                     "label": "Minimum Thin Wall Line Width",
                     "description": "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself.",
                     "unit": "mm",
-                    "value": "machine_nozzle_size * .75",
+                    "value": "min_wall_line_width",
                     "default_value": 0.2,
                     "minimum_value": "0.001",
                     "minimum_value_warning": "min_feature_size",
@@ -2534,7 +2534,7 @@
                     "unit": "%",
                     "type": "float",
                     "default_value": 100.0,
-                    "enabled": false,
+                    "enabled": true,
                     "minimum_value": "0.001",
                     "minimum_value_warning": "100",
                     "maximum_value_warning": "120",
@@ -2550,7 +2550,7 @@
                             "unit": "%",
                             "type": "float",
                             "default_value": 100.0,
-                            "enabled": false,
+                            "enabled": true,
                             "minimum_value": "0.001",
                             "minimum_value_warning": "100",
                             "maximum_value_warning": "120",
@@ -2566,7 +2566,7 @@
                             "unit": "%",
                             "type": "float",
                             "default_value": 100.0,
-                            "enabled": false,
+                            "enabled": true,
                             "minimum_value": "0.001",
                             "minimum_value_warning": "100",
                             "maximum_value_warning": "120",

resources/definitions/ultimaker.def.json

@@ -81,7 +81,19 @@
             "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))"
         },
         "xy_offset": {
-            "value": "-layer_height * 0.2"
+            "value": "-layer_height * 0.1"
+        },
+        "meshfix_maximum_resolution": {
+            "value": "max(speed_wall_0 / 75, 0.5)"
+        },
+        "meshfix_maximum_deviation": {
+            "value": "machine_nozzle_size / 10"
+        },
+        "jerk_travel": {
+            "value": "jerk_print"
+        },
+        "acceleration_travel": {
+            "value": "acceleration_wall"
         }
     }
 }

resources/definitions/ultimaker2_plus.def.json

@@ -34,9 +34,6 @@
         "layer_height_0": {
             "value": "round(machine_nozzle_size / 1.5, 2)"
         },
-        "line_width": {
-            "value": "machine_nozzle_size"
-        },
         "speed_support": {
             "value": "speed_wall_0"
         },

resources/definitions/ultimaker2_plus_connect.def.json

@@ -60,7 +60,6 @@
         "speed_infill": { "value": "speed_print" },
         "speed_wall_x": { "value": "speed_wall" },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
-        "line_width": { "value": "machine_nozzle_size" },
         "optimize_wall_printing_order": { "value": "True" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
         "speed_support": { "value": "speed_wall_0" },

resources/definitions/ultimaker3.def.json

@@ -111,7 +111,6 @@
         "jerk_support_infill": {"minimum_value_warning": 20 },
         "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
         "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_travel": {"minimum_value_warning": 20 },
         "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
         "jerk_print_layer_0": {"minimum_value_warning": 20 },
         "jerk_travel_layer_0": {"minimum_value_warning": 20 },

resources/definitions/ultimaker_s3.def.json

@@ -103,7 +103,6 @@
         "jerk_support_infill": {"minimum_value_warning": 20 },
         "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
         "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_travel": {"minimum_value_warning": 20 },
         "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
         "jerk_print_layer_0": {"minimum_value_warning": 20 },
         "jerk_travel_layer_0": {"minimum_value_warning": 20 },
@@ -159,8 +158,6 @@
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "initial_layer_line_width_factor": { "value": "120" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
     }

resources/definitions/ultimaker_s5.def.json

@@ -105,7 +105,6 @@
         "jerk_support_infill": {"minimum_value_warning": 20 },
         "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
         "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_travel": {"minimum_value_warning": 20 },
         "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
         "jerk_print_layer_0": {"minimum_value_warning": 20 },
         "jerk_travel_layer_0": {"minimum_value_warning": 20 },
@@ -161,8 +160,6 @@
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "optimize_wall_printing_order": { "value": "True" },
         "initial_layer_line_width_factor": { "value": "120" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },

resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
 initial_layer_line_width_factor = 100
 
-material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature - 5
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1

resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg

@@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = 190
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 retraction_hop = 0.2
 skin_overlap = 5
 speed_layer_0 = =speed_print

resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature - 15
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 30 / 30)
 speed_print = 30

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -34,8 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -34,8 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -33,8 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -33,8 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg

@@ -15,6 +15,8 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature - 5
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 skin_overlap = 20
 speed_print = 60

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg

@@ -16,6 +16,8 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg

@@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)

resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg

@@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
@@ -26,8 +28,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-jerk_travel = 50
-
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000

resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg

@@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_print = 70
@@ -25,8 +27,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 
 raft_airgap = 0.25

resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg

@@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
@@ -27,8 +29,6 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 
 raft_airgap = 0.25

resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg

@@ -18,13 +18,13 @@ cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 
 raft_airgap = 0.25

resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg

@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
@@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature + 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
@@ -42,3 +40,4 @@ top_bottom_thickness = 0.9
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 
 raft_airgap = =0.25
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20

resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg

@@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg

@@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10

resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg

@@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10

resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg

@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
@@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature - 5
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
@@ -42,3 +40,4 @@ top_bottom_thickness = 1.2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 
 raft_airgap = =0.25
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg

@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg

@@ -22,5 +22,5 @@ speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_infill = =math.ceil(speed_print * 33 / 45)
+
-jerk_travel = 50
+speed_infill = =math.ceil(speed_print * 33 / 45)

resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg

@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg

@@ -16,11 +16,12 @@ brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -16,6 +16,8 @@ brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 45
@@ -23,6 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50
+cool_fan_speed = 20
-cool_fan_speed = 20 
 initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -16,12 +16,13 @@ brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 layer_height_0 = 0.27
 initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg

@@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg

@@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg

@@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 0
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 raft_margin = 10
 retract_at_layer_change = False

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg

@@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature -
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_infill = =math.ceil(speed_print * 30 / 35)

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -49,4 +49,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50

resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -19,4 +19,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
 initial_layer_line_width_factor = 100
 
-material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature - 5
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1

resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg

@@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = 190
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 retraction_hop = 0.2
 skin_overlap = 5
 speed_layer_0 = =speed_print

resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -22,6 +22,8 @@ machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature - 15
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 30 / 30)
 speed_print = 30

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -32,5 +32,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-jerk_travel = 50
 raft_surface_speed = 45

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -34,7 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg

@@ -33,7 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -33,7 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg

@@ -15,6 +15,8 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature - 5
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg

@@ -16,6 +16,8 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg

@@ -18,6 +18,8 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -17,6 +17,8 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 retraction_combing_max_distance = 8
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg

@@ -18,6 +18,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
@@ -27,8 +29,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-jerk_travel = 50
-
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg

@@ -17,6 +17,8 @@ cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_print = 70
@@ -25,7 +27,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg

@@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
@@ -27,7 +29,5 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg

@@ -18,12 +18,12 @@ cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25

resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg

@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
@@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature + 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
@@ -42,3 +40,4 @@ top_bottom_thickness = 0.9
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 
 raft_airgap = =0.25
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -22,6 +22,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg

@@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg

@@ -19,6 +19,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg

@@ -20,6 +20,8 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg

@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
@@ -32,6 +28,8 @@ material_print_temperature = =default_material_print_temperature - 5
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
@@ -42,3 +40,4 @@ top_bottom_thickness = 1.2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 
 raft_airgap = =0.25
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg

@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg

@@ -23,4 +23,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg

@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg

@@ -16,11 +16,12 @@ brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -16,6 +16,8 @@ brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 45
@@ -23,6 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -16,12 +16,13 @@ brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.5
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
 

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg

@@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg

@@ -21,6 +21,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg

@@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 0
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -23,6 +23,8 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 raft_margin = 10
 retract_at_layer_change = False

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg

@@ -25,6 +25,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature -
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_infill = =math.ceil(speed_print * 30 / 35)

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg

@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -48,4 +48,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50

resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg

@@ -24,6 +24,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
+material_shrinkage_percentage_xy = 100.2
+material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45

resources/setting_visibility/expert.cfg

@@ -117,6 +117,9 @@ material_bed_temperature
 material_bed_temperature_layer_0
 material_adhesion_tendency
 material_surface_energy
+material_shrinkage_percentage
+material_shrinkage_percentage_xy
+material_shrinkage_percentage_z
 material_flow
 wall_material_flow
 wall_0_material_flow
@@ -134,6 +137,7 @@ material_flow_layer_0
 material_standby_temperature
 material_alternate_walls
 
+
 [speed]
 speed_print
 speed_infill