Applied printer-linter format

resources/definitions/dagoma_delta.def.json

@@ -1,27 +1,27 @@
 {
-    "name": "Dagoma Delta",
     "version": 2,
+    "name": "Dagoma Delta",
     "inherits": "fdmprinter",
-    "metadata": {
+    "metadata":
+    {
         "visible": false,
         "author": "Dagoma",
         "manufacturer": "Dagoma",
-        "first_start_actions": ["MachineSettingsAction"]
+        "first_start_actions": [ "MachineSettingsAction" ]
     },
-    "overrides": {
+    "overrides":
-        "machine_width": {
+    {
-            "default_value": 195.55
+        "adhesion_type": { "default_value": "skirt" },
-        },
+        "default_material_print_temperature": { "default_value": 205 },
-        "machine_height": {
+        "gantry_height": { "value": "0" },
-            "default_value": 205
+        "infill_before_walls": { "value": "False" },
-        },
+        "inset_direction": { "value": "'inside_out'" },
-        "machine_depth": {
+        "layer_height_0": { "default_value": 0.26 },
-            "default_value": 195.55
+        "machine_center_is_zero": { "default_value": true },
-        },
+        "machine_depth": { "default_value": 195.55 },
-        "machine_center_is_zero": {
+        "machine_end_gcode": { "default_value": "\nM104 S0\nM106 S255\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 E-2 F9000\nG90\nG28\n" },
-            "default_value": true
+        "machine_head_with_fans_polygon":
-        },
+        {
-        "machine_head_with_fans_polygon": {
             "default_value": [
                 [-36, -42],
                 [-36, 42],
@@ -29,47 +29,14 @@
                 [36, -42]
             ]
         },
-        "gantry_height": {
+        "machine_height": { "default_value": 205 },
-          "value": "0"
+        "machine_shape": { "default_value": "elliptic" },
-        },
+        "machine_start_gcode": { "default_value": ";Gcode by Cura\nG90\nG28\nM107\nM109 R100\nG29\nM109 S{material_print_temperature_layer_0} U-55 X55 V-85 Y-85 W0.26 Z0.26\nM82\nG92 E0\nG1 F200 E6\nG92 E0\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F6000\n" },
-        "machine_shape": {
+        "machine_width": { "default_value": 195.55 },
-            "default_value": "elliptic"
+        "retraction_amount": { "default_value": 3.8 },
-        },
+        "retraction_speed": { "default_value": 60 },
-        "machine_start_gcode": {
+        "skirt_line_count": { "default_value": 2 },
-            "default_value": ";Gcode by Cura\nG90\nG28\nM107\nM109 R100\nG29\nM109 S{material_print_temperature_layer_0} U-55 X55 V-85 Y-85 W0.26 Z0.26\nM82\nG92 E0\nG1 F200 E6\nG92 E0\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F6000\n"
+        "speed_print": { "default_value": 40 },
-        },
+        "top_bottom_thickness": { "default_value": 1 }
-        "machine_end_gcode": {
-            "default_value": "\nM104 S0\nM106 S255\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 E-2 F9000\nG90\nG28\n"
-        },
-        "default_material_print_temperature": {
-            "default_value": 205
-        },
-        "speed_print": {
-            "default_value": 40
-        },
-        "retraction_amount": {
-            "default_value": 3.8
-        },
-        "retraction_speed": {
-            "default_value": 60
-        },
-        "adhesion_type": {
-            "default_value": "skirt"
-        },
-        "skirt_line_count": {
-            "default_value": 2
-        },
-        "layer_height_0": {
-            "default_value": 0.26
-        },
-        "top_bottom_thickness": {
-            "default_value": 1
-        },
-        "infill_before_walls": {
-            "value": "False"
-        },
-        "inset_direction": {
-            "value": "'inside_out'"
-        }
     }
 }

resources/definitions/dagoma_pro_430_base.def.json

@@ -1,4 +1,3 @@
-
 {
     "version": 2,
     "name": "Dagoma PRO 430 BASE",
@@ -10,29 +9,32 @@
         "manufacturer": "Dagoma",
         "file_formats": "text/x-gcode",
         "platform": "dagoma_pro430.obj",
-        "first_start_actions": ["MachineSettingsAction"],
+        "first_start_actions": [ "MachineSettingsAction" ],
-        "has_materials": true,
         "has_machine_quality": true,
+        "has_materials": true,
         "has_variants": true,
         "variants_name": "Nozzle"
     },
-
     "overrides":
     {
+        "default_material_bed_temperature": { "default_value": 50 },
+        "default_material_print_temperature":
+        {
+            "default_value": 205,
+            "maximum_value": "430"
+        },
+        "infill_before_walls": { "value": "False" },
+        "inset_direction": { "value": "'inside_out'" },
+        "machine_depth": { "default_value": 320 },
         "machine_gcode_flavor": { "default_value": "Marlin" },
         "machine_heated_bed": { "default_value": true },
         "machine_width": { "default_value": 430 },
-        "machine_depth": { "default_value": 320 },
-        "default_material_bed_temperature": { "default_value": 50 },
-        "default_material_print_temperature": { "default_value": 205, "maximum_value": "430" },
-        "material_print_temperature": { "maximum_value": "430" },
-        "material_print_temperature_layer_0": { "maximum_value": "430" },
-        "material_initial_print_temperature": { "maximum_value": "430" },
-        "material_final_print_temperature": { "maximum_value": "430" },
         "material_break_preparation_temperature": { "maximum_value": "430" },
         "material_break_temperature": { "maximum_value": "430" },
-        "material_standby_temperature": { "maximum_value": "430" },
+        "material_final_print_temperature": { "maximum_value": "430" },
-        "infill_before_walls": { "value": "False" },
+        "material_initial_print_temperature": { "maximum_value": "430" },
-        "inset_direction": { "value": "'inside_out'" }
+        "material_print_temperature": { "maximum_value": "430" },
+        "material_print_temperature_layer_0": { "maximum_value": "430" },
+        "material_standby_temperature": { "maximum_value": "430" }
     }
 }

resources/definitions/dagoma_pro_430_bowden.def.json

@@ -8,19 +8,40 @@
         "author": "Dagoma",
         "manufacturer": "Dagoma",
         "machine_extruder_trains": { "0": "dagoma_pro_430_bowden_extruder" },
-        "preferred_variant_name": "Brass 0.4mm",
+        "preferred_quality_type": "h0.2",
-        "preferred_quality_type": "h0.2"
+        "preferred_variant_name": "Brass 0.4mm"
     },
-
     "overrides":
     {
-        "machine_name": { "default_value": "Dagoma PRO 430 Bowden" },
-        "machine_extruder_count": { "default_value": 1 },
-        "machine_height": { "default_value": 350 },
-        "nozzle_disallowed_areas": { "default_value": [ [[-215, 160], [-166, 160], [-215, 111]], [[215, 160], [166, 160], [215, 111]] ] },
-        "machine_head_with_fans_polygon": { "default_value": [ [-22.5, -22.5], [-22.5, 22.5], [22.5, 22.5], [22.5, -22.5] ] },
         "gantry_height": { "value": "35" },
-        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Contact: contact-pro@dagoma3d.com\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}°C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG21 ;Set units to millimeters\nG90 ;Set all axes to absolute\nM104 S120 ; Launch hotend heating up to 120°C\nM190 S{material_bed_temperature} ;Preheat hotbed\nM106 S255; Activating layers fans for checkup and minimise filament on t\nG28 ;Go to origin on all axes\nG29 ; Bed Leveling\nM107 ; Turn off Layers Fans\nG0 X215 Y1 Z0.4 ;Move XYZ axis before purge\nM109 S{material_print_temperature_layer_0} ;Wait for initial print temp\nM83 ;Set E to relative positioning\nG1 E{retraction_amount} F200 ;Purge\nG0 Z3 ;Move Z axis before print start\nM82 ;Set E to absolute positioning\nG92 E0 ;Set E position\nG1 F{speed_travel} ;Set the feedrate to {speed_travel}mm/s\n" },
+        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 S0 ;Set hotend temperature for cooldown\nM140 S0 ;Set hotbed temperature for cooldown\nG91 ;Set all axes to relative\nG0 Z+3 ;Move Z axis after print end\nG1 E-{retraction_amount} F5000 ;Retract filament to stop oozing\nG28 X Y ;Home the X and Y axes\nM18 ;Disable steppers motors\n" },
-        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 S0 ;Set hotend temperature for cooldown\nM140 S0 ;Set hotbed temperature for cooldown\nG91 ;Set all axes to relative\nG0 Z+3 ;Move Z axis after print end\nG1 E-{retraction_amount} F5000 ;Retract filament to stop oozing\nG28 X Y ;Home the X and Y axes\nM18 ;Disable steppers motors\n" }
+        "machine_extruder_count": { "default_value": 1 },
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [-22.5, -22.5],
+                [-22.5, 22.5],
+                [22.5, 22.5],
+                [22.5, -22.5]
+            ]
+        },
+        "machine_height": { "default_value": 350 },
+        "machine_name": { "default_value": "Dagoma PRO 430 Bowden" },
+        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Contact: contact-pro@dagoma3d.com\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}\u00b0C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG21 ;Set units to millimeters\nG90 ;Set all axes to absolute\nM104 S120 ; Launch hotend heating up to 120\u00b0C\nM190 S{material_bed_temperature} ;Preheat hotbed\nM106 S255; Activating layers fans for checkup and minimise filament on t\nG28 ;Go to origin on all axes\nG29 ; Bed Leveling\nM107 ; Turn off Layers Fans\nG0 X215 Y1 Z0.4 ;Move XYZ axis before purge\nM109 S{material_print_temperature_layer_0} ;Wait for initial print temp\nM83 ;Set E to relative positioning\nG1 E{retraction_amount} F200 ;Purge\nG0 Z3 ;Move Z axis before print start\nM82 ;Set E to absolute positioning\nG92 E0 ;Set E position\nG1 F{speed_travel} ;Set the feedrate to {speed_travel}mm/s\n" },
+        "nozzle_disallowed_areas":
+        {
+            "default_value": [
+                [
+                    [-215, 160],
+                    [-166, 160],
+                    [-215, 111]
+                ],
+                [
+                    [215, 160],
+                    [166, 160],
+                    [215, 111]
+                ]
+            ]
+        }
     }
 }

resources/definitions/dagoma_pro_430_directdrive.def.json

@@ -8,23 +8,48 @@
         "author": "Dagoma",
         "manufacturer": "Dagoma",
         "machine_extruder_trains": { "0": "dagoma_pro_430_directdrive_extruder" },
-        "preferred_variant_name": "Brass 0.4mm",
+        "preferred_quality_type": "h0.2",
-        "preferred_quality_type": "h0.2"
+        "preferred_variant_name": "Brass 0.4mm"
     },
-
     "overrides":
     {
-        "machine_name": { "default_value": "Dagoma PRO 430 Direct Drive" },
+        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 S0 ;Set hotend temperature for cooldown\nM140 S0 ;Set hotbed temperature for cooldown\nG91 ;Set all axes to relative\nG0 Z+3 ;Move Z axis after print end\nG1 E-5 F5000 ;Retract filament to stop oozing\nG28 X Y ;Home the X and Y axes\nM18 ;Disable steppers motors\n" },
         "machine_extruder_count": { "default_value": 1 },
         "machine_height": { "default_value": 310 },
-        "nozzle_disallowed_areas": { "default_value": [ 
+        "machine_name": { "default_value": "Dagoma PRO 430 Direct Drive" },
-            [[-215, 160], [-166, 160], [-215, 111]], 
+        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Contact: contact-pro@dagoma3d.com\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}\u00b0C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG21 ;Set units to millimeters\nG90 ;Set all axes to absolute\nM104 S120 ; Launch hotend heating up to 120\u00b0C\nM190 S{material_bed_temperature} ;Preheat hotbed\nM106 S255; Activating layers fans for checkup and minimise filament on t\nG28 ;Go to origin on all axes\nG29 ; Bed Leveling\nM107 ; Turn off Layers Fans\nG0 X215 Y1 Z0.4 ;Move XYZ axis before purge\nM109 S{material_print_temperature_layer_0} ;Wait for initial print temp\nM83 ;Set E to relative positioning\nG1 E{retraction_amount} F200 ;Purge\nG0 Z3 ;Move Z axis before print start\nM82 ;Set E to absolute positioning\nG92 E0 ;Set E position\nG1 F{speed_travel} ;Set the feedrate to {speed_travel}mm/s\n" },
-            [[215, 160], [166, 160], [215, 111]], 
+        "nozzle_disallowed_areas":
-            [[-215, 160], [-200, 160], [-200, -160], [-215, -160]], 
+        {
-            [[215, 160], [200, 160], [200, -160], [215, -160]], 
+            "default_value": [
-            [[-215, 160], [-215, 137.5], [215, 137.5], [215, 160]] 
+                [
-        ] },
+                    [-215, 160],
-        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Contact: contact-pro@dagoma3d.com\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}°C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG21 ;Set units to millimeters\nG90 ;Set all axes to absolute\nM104 S120 ; Launch hotend heating up to 120°C\nM190 S{material_bed_temperature} ;Preheat hotbed\nM106 S255; Activating layers fans for checkup and minimise filament on t\nG28 ;Go to origin on all axes\nG29 ; Bed Leveling\nM107 ; Turn off Layers Fans\nG0 X215 Y1 Z0.4 ;Move XYZ axis before purge\nM109 S{material_print_temperature_layer_0} ;Wait for initial print temp\nM83 ;Set E to relative positioning\nG1 E{retraction_amount} F200 ;Purge\nG0 Z3 ;Move Z axis before print start\nM82 ;Set E to absolute positioning\nG92 E0 ;Set E position\nG1 F{speed_travel} ;Set the feedrate to {speed_travel}mm/s\n" },
+                    [-166, 160],
-        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 S0 ;Set hotend temperature for cooldown\nM140 S0 ;Set hotbed temperature for cooldown\nG91 ;Set all axes to relative\nG0 Z+3 ;Move Z axis after print end\nG1 E-5 F5000 ;Retract filament to stop oozing\nG28 X Y ;Home the X and Y axes\nM18 ;Disable steppers motors\n" }
+                    [-215, 111]
+                ],
+                [
+                    [215, 160],
+                    [166, 160],
+                    [215, 111]
+                ],
+                [
+                    [-215, 160],
+                    [-200, 160],
+                    [-200, -160],
+                    [-215, -160]
+                ],
+                [
+                    [215, 160],
+                    [200, 160],
+                    [200, -160],
+                    [215, -160]
+                ],
+                [
+                    [-215, 160],
+                    [-215, 137.5],
+                    [215, 137.5],
+                    [215, 160]
+                ]
+            ]
+        }
     }
 }

resources/definitions/dagoma_pro_430_dual.def.json

@@ -7,28 +7,54 @@
         "visible": true,
         "author": "Dagoma",
         "manufacturer": "Dagoma",
-        "machine_extruder_trains": { 
+        "machine_extruder_trains":
+        {
             "0": "dagoma_pro_430_dual_extruder_left",
             "1": "dagoma_pro_430_dual_extruder_right"
         },
-        "quality_definition": "dagoma_pro_430_bowden",
+        "preferred_quality_type": "h0.2",
         "preferred_variant_name": "Brass 0.4mm",
-        "preferred_quality_type": "h0.2"
+        "quality_definition": "dagoma_pro_430_bowden"
     },
-
     "overrides":
     {
-        "machine_name": { "default_value": "Dagoma PRO 430 Dual" },
+        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 T0 S0 ;Set hotend temperature for cooldown\nM104 T1 S0 ;Set hotend temperature for cooldown\nM140 S0 ;Set hotbed temperature for cooldown\nG91 ;Set all axes to relative\nG0 Z+3 ;Move Z axis after print end\nG1 E-{retraction_amount} F5000 ;Retract filament to stop oozing\nG90 ;Set all axes to absolute\nG28 X Y ;Home the X and Y axes\nM84 ; Disable steppers motors\nM18 ;Disable steppers motors\nM117 Print end ;Set message\n" },
         "machine_extruder_count": { "default_value": 2 },
         "machine_height": { "default_value": 310 },
-        "nozzle_disallowed_areas": { "default_value": [ 
+        "machine_name": { "default_value": "Dagoma PRO 430 Dual" },
-            [[-215, 160], [-166, 160], [-215, 111]], 
+        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Contact: contact-pro@dagoma3d.com\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}\u00b0C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG21 ;Set units to millimeters\nG90 ;Set all axes to absolute\nM104 S120 ; Launch hotend heating up to 120\u00b0C\nM190 S{material_bed_temperature} ;Preheat hotbed\nM106 S255; Activating layers fans for checkup and minimise filament on t\nG28 ;Go to origin on all axes\nG29 ; Bed Leveling\nM107 ; Turn off Layers Fans\nG0 X215 Y1 Z0.4 ;Move XYZ axis before purge\nM109 S{material_print_temperature_layer_0} ;Wait for initial print temp\nM83 ;Set E to relative positioning\nG1 E{retraction_amount} F200 ;Purge\nG0 Z15.0 F6000 ;Move Z axis before print start\nM82 ;Set E to absolute positioning\nG92 E0 ;Set E position\nG1 F{travel_speed} ;Set the feedrate to {travel_speed}mm/s\n" },
-            [[215, 160], [166, 160], [215, 111]], 
+        "nozzle_disallowed_areas":
-            [[-215, 160], [-154, 160], [-154, -160], [-215, -160]], 
+        {
-            [[215, 160], [154, 160], [154, -160], [215, -160]], 
+            "default_value": [
-            [[-215, 160], [-215, 125], [215, 125], [215, 160]] 
+                [
-        ] },
+                    [-215, 160],
-        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Contact: contact-pro@dagoma3d.com\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}°C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG21 ;Set units to millimeters\nG90 ;Set all axes to absolute\nM104 S120 ; Launch hotend heating up to 120°C\nM190 S{material_bed_temperature} ;Preheat hotbed\nM106 S255; Activating layers fans for checkup and minimise filament on t\nG28 ;Go to origin on all axes\nG29 ; Bed Leveling\nM107 ; Turn off Layers Fans\nG0 X215 Y1 Z0.4 ;Move XYZ axis before purge\nM109 S{material_print_temperature_layer_0} ;Wait for initial print temp\nM83 ;Set E to relative positioning\nG1 E{retraction_amount} F200 ;Purge\nG0 Z15.0 F6000 ;Move Z axis before print start\nM82 ;Set E to absolute positioning\nG92 E0 ;Set E position\nG1 F{travel_speed} ;Set the feedrate to {travel_speed}mm/s\n" },
+                    [-166, 160],
-        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 T0 S0 ;Set hotend temperature for cooldown\nM104 T1 S0 ;Set hotend temperature for cooldown\nM140 S0 ;Set hotbed temperature for cooldown\nG91 ;Set all axes to relative\nG0 Z+3 ;Move Z axis after print end\nG1 E-{retraction_amount} F5000 ;Retract filament to stop oozing\nG90 ;Set all axes to absolute\nG28 X Y ;Home the X and Y axes\nM84 ; Disable steppers motors\nM18 ;Disable steppers motors\nM117 Print end ;Set message\n" }
+                    [-215, 111]
+                ],
+                [
+                    [215, 160],
+                    [166, 160],
+                    [215, 111]
+                ],
+                [
+                    [-215, 160],
+                    [-154, 160],
+                    [-154, -160],
+                    [-215, -160]
+                ],
+                [
+                    [215, 160],
+                    [154, 160],
+                    [154, -160],
+                    [215, -160]
+                ],
+                [
+                    [-215, 160],
+                    [-215, 125],
+                    [215, 125],
+                    [215, 160]
+                ]
+            ]
+        }
     }
 }

resources/definitions/dagoma_sigma.def.json

@@ -1,36 +1,27 @@
 {
-    "name": "Dagoma Sigma",
     "version": 2,
+    "name": "Dagoma Sigma",
     "inherits": "dagoma_delta",
-    "metadata": {
+    "metadata":
+    {
         "visible": true,
         "author": "Dagoma",
         "manufacturer": "Dagoma",
         "file_formats": "text/x-gcode",
         "platform": "dagoma_sigma.obj",
-        "has_materials": true,
         "has_machine_quality": true,
+        "has_materials": true,
         "has_variants": true,
-        "preferred_variant_name": "0.4mm",
+        "machine_extruder_trains": { "0": "dagoma_sigma_extruder" },
         "preferred_quality_type": "h0.2",
-        "variants_name": "Nozzle",
+        "preferred_variant_name": "0.4mm",
-        "machine_extruder_trains":
+        "variants_name": "Nozzle"
+    },
+    "overrides":
     {
-            "0": "dagoma_sigma_extruder"
+        "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 S0\nM107\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 E-2 F9000\nG90\nG28\n" },
-        }
+        "machine_name": { "default_value": "Dagoma Sigma" },
-    },
+        "machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}\u00b0C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG90 ;absolute positioning\nM104 S120 ;Launch heating up to 120\u00b0C\nM106 S255 ;Activating layers fans\nG29 ;Homing and Calibration\nM107 ;Off Ventilateur\nM109 S{material_print_temperature} U-55 X55 V-85 Y-85 W0.26 Z0.26 ;Temperature for the first layer only\nM82 ;Set extruder to absolute mode\nG92 E0 ;Zero the extruded length\nG1 F200 E6 ;Extrude 10mm of feed stock\nG92 E0 ;Zero the extruded length again\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F{speed_travel}\nM117 Printing...\n" },
-    "overrides": {
+        "speed_travel": { "value": 150 }
-        "machine_name": {
-            "default_value": "Dagoma Sigma"
-        },
-        "speed_travel" : {
-            "value": 150
-        },
-        "machine_start_gcode": {
-            "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}°C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\n\nG90 ;absolute positioning\nM104 S120 ;Launch heating up to 120°C\nM106 S255 ;Activating layers fans\nG29 ;Homing and Calibration\nM107 ;Off Ventilateur\nM109 S{material_print_temperature} U-55 X55 V-85 Y-85 W0.26 Z0.26 ;Temperature for the first layer only\nM82 ;Set extruder to absolute mode\nG92 E0 ;Zero the extruded length\nG1 F200 E6 ;Extrude 10mm of feed stock\nG92 E0 ;Zero the extruded length again\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F{speed_travel}\nM117 Printing...\n"
-        },
-        "machine_end_gcode": {
-            "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\n\nM104 S0\nM107\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 E-2 F9000\nG90\nG28\n"
-        }
     }
 }

resources/extruders/dagoma_pro_430_bowden_extruder.def.json

@@ -2,17 +2,14 @@
     "version": 2,
     "name": "Extruder",
     "inherits": "fdmextruder",
-    "metadata": {
+    "metadata":
+    {
         "machine": "dagoma_pro_430_bowden",
         "position": "0"
     },
-
+    "overrides":
-    "overrides": {
+    {
-        "extruder_nr": {
+        "extruder_nr": { "default_value": 0 },
-            "default_value": 0
+        "material_diameter": { "default_value": 1.75 }
-        },
-        "material_diameter": {
-            "default_value": 1.75
-        }
     }
 }

resources/extruders/dagoma_pro_430_directdrive_extruder.def.json

@@ -2,17 +2,14 @@
     "version": 2,
     "name": "Extruder",
     "inherits": "fdmextruder",
-    "metadata": {
+    "metadata":
+    {
         "machine": "dagoma_pro_430_directdrive",
         "position": "0"
     },
-
+    "overrides":
-    "overrides": {
+    {
-        "extruder_nr": {
+        "extruder_nr": { "default_value": 0 },
-            "default_value": 0
+        "material_diameter": { "default_value": 1.75 }
-        },
-        "material_diameter": {
-            "default_value": 1.75
-        }
     }
 }

resources/extruders/dagoma_pro_430_dual_extruder_left.def.json

@@ -2,18 +2,18 @@
     "version": 2,
     "name": "Extruder 1",
     "inherits": "fdmextruder",
-    "metadata": {
+    "metadata":
+    {
         "machine": "dagoma_pro_430_dual",
         "position": "0"
     },
-
+    "overrides":
-    "overrides": {
+    {
-        "extruder_nr": {
+        "extruder_nr":
+        {
             "default_value": 0,
             "maximum_value": "1"
         },
-        "material_diameter": {
+        "material_diameter": { "default_value": 1.75 }
-            "default_value": 1.75
-        }
     }
 }

resources/extruders/dagoma_pro_430_dual_extruder_right.def.json

@@ -2,18 +2,18 @@
     "version": 2,
     "name": "Extruder 2",
     "inherits": "fdmextruder",
-    "metadata": {
+    "metadata":
+    {
         "machine": "dagoma_pro_430_dual",
         "position": "1"
     },
-
+    "overrides":
-    "overrides": {
+    {
-        "extruder_nr": {
+        "extruder_nr":
+        {
             "default_value": 1,
             "maximum_value": "1"
         },
-        "material_diameter": {
+        "material_diameter": { "default_value": 1.75 }
-            "default_value": 1.75
-        }
     }
 }

resources/extruders/dagoma_sigma_extruder.def.json

@@ -2,20 +2,15 @@
     "version": 2,
     "name": "Extruder",
     "inherits": "fdmextruder",
-    "metadata": {
+    "metadata":
+    {
         "machine": "dagoma_sigma",
         "position": "0"
     },
-
+    "overrides":
-    "overrides": {
+    {
-        "extruder_nr": {
+        "extruder_nr": { "default_value": 0 },
-            "default_value": 0
+        "machine_nozzle_size": { "default_value": 0.4 },
-        },
+        "material_diameter": { "default_value": 1.75 }
-        "machine_nozzle_size": {
-            "default_value": 0.4
-        },
-        "material_diameter": {
-            "default_value": 1.75
-        }
     }
 }

resources/quality/dagoma/dagoma_pro_430_bowden_brass_0.4_pla_h0.1.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_pro_430_bowden
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
-weight = -1
-material = generic_pla
 variant = Brass 0.4mm
+weight = -1
 
 [values]
 acceleration_infill = 2500
@@ -24,3 +24,4 @@ speed_topbottom = 45.0
 speed_wall_0 = 35.0
 speed_wall_x = 45.0
 support_z_distance = 0.2
+

resources/quality/dagoma/dagoma_pro_430_bowden_brass_0.4_pla_h0.2.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_bowden
+name = Normal
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
-weight = 1
-material = generic_pla
 variant = Brass 0.4mm
+weight = 1
 
 [values]
 acceleration_infill = 3000
@@ -22,3 +22,4 @@ speed_print = 70
 speed_wall_0 = 50
 speed_wall_x = 60
 support_z_distance = 0.1
+

resources/quality/dagoma/dagoma_pro_430_bowden_brass_0.4_pla_h0.3.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_pro_430_bowden
+name = Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
-weight = 0
-material = generic_pla
 variant = Brass 0.4mm
+weight = 0
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_bowden_brass_0.8_pla_h0.4.inst.cfg

@@ -1,20 +1,21 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_bowden
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -1
-material = generic_pla
 variant = Brass 0.8mm
+weight = -1
 
 [values]
-speed_infill = 35
-speed_print = 45
-speed_wall_0 = =speed_wall
 material_flow_layer_0 = 110
 material_print_temperature = =default_material_print_temperature + 35
 material_print_temperature_layer_0 = =default_material_print_temperature + 30
+speed_infill = 35
+speed_print = 45
+speed_wall_0 = =speed_wall
+

resources/quality/dagoma/dagoma_pro_430_bowden_brass_0.8_pla_h0.6.inst.cfg

@@ -1,19 +1,20 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_bowden
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
-weight = 1
-material = generic_pla
 variant = Brass 0.8mm
+weight = 1
 
 [values]
+material_print_temperature = =default_material_print_temperature + 60
+material_print_temperature_layer_0 = =default_material_print_temperature + 25
 speed_infill = 35
 speed_print = 50
 speed_wall_0 = 20
-material_print_temperature = =default_material_print_temperature + 60
+
-material_print_temperature_layer_0 = =default_material_print_temperature + 25

resources/quality/dagoma/dagoma_pro_430_bowden_brass_1.0_pla_h0.4.inst.cfg

@@ -1,18 +1,19 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_bowden
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -1
-material = generic_pla
 variant = Brass 1.0mm
+weight = -1
 
 [values]
 material_flow_layer_0 = 110
 material_print_temperature = =default_material_print_temperature + 55
 speed_print = 45
 speed_wall_0 = 30
+

resources/quality/dagoma/dagoma_pro_430_bowden_brass_1.0_pla_h0.6.inst.cfg

@@ -1,18 +1,19 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_bowden
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
-weight = 1
-material = generic_pla
 variant = Brass 1.0mm
+weight = 1
 
 [values]
 material_flow_layer_0 = 150
 material_print_temperature = =default_material_print_temperature + 60
 speed_print = 50
 speed_wall_0 = 20.0
+

resources/quality/dagoma/dagoma_pro_430_bowden_brass_1.0_pla_h0.8.inst.cfg

@@ -1,20 +1,21 @@
 [general]
-version = 4
-name = Coarse
 definition = dagoma_pro_430_bowden
+name = Coarse
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.8
 setting_version = 20
 type = quality
-quality_type = h0.8
-weight = 0
-material = generic_pla
 variant = Brass 1.0mm
+weight = 0
 
 [values]
 bottom_layers = 2
+material_flow_layer_0 = 140
 material_print_temperature = =default_material_print_temperature + 65
 speed_print = 45
 speed_wall_0 = 20
 speed_wall_x = 30
-material_flow_layer_0 = 140
+

resources/quality/dagoma/dagoma_pro_430_bowden_global_h0.1.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_pro_430_bowden
+name = Fine
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
 weight = 1
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.1
+

resources/quality/dagoma/dagoma_pro_430_bowden_global_h0.2.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_bowden
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
 weight = 0
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.2
+

resources/quality/dagoma/dagoma_pro_430_bowden_global_h0.3.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_pro_430_bowden
+name = Fast
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
 weight = -1
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.3
+

resources/quality/dagoma/dagoma_pro_430_bowden_global_h0.4.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_bowden
+name = Very Fast
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
 weight = -2
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.4
+

resources/quality/dagoma/dagoma_pro_430_bowden_global_h0.6.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_bowden
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
 weight = -3
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.6
+

resources/quality/dagoma/dagoma_pro_430_bowden_global_h0.8.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Coarse
 definition = dagoma_pro_430_bowden
+name = Coarse
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.8
 setting_version = 20
 type = quality
-quality_type = h0.8
 weight = -4
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.8
+

resources/quality/dagoma/dagoma_pro_430_bowden_steel_0.4_pla_h0.1.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_pro_430_bowden
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
-weight = 1
-material = generic_pla
 variant = Steel 0.4mm
+weight = 1
 
 [values]
 acceleration_infill = 2500
@@ -28,3 +28,4 @@ speed_wall_x = 45.0
 support_interface_enable = False
 support_top_distance = 0.2
 support_z_distance = 0.2
+

resources/quality/dagoma/dagoma_pro_430_bowden_steel_0.4_pla_h0.2.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_bowden
+name = Normal
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
-weight = 0
-material = generic_pla
 variant = Steel 0.4mm
+weight = 0
 
 [values]
 acceleration_infill = 3000
@@ -25,3 +25,4 @@ speed_wall_0 = 50
 speed_wall_x = 60
 support_top_distance = 0.1
 support_z_distance = 0.1
+

resources/quality/dagoma/dagoma_pro_430_bowden_steel_0.4_pla_h0.3.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_pro_430_bowden
+name = Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
-weight = -1
-material = generic_pla
 variant = Steel 0.4mm
+weight = -1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_bowden_steel_0.8_pla_h0.4.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_bowden
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -1
-material = generic_pla
 variant = Steel 0.8mm
+weight = -1
 
 [values]
 gradual_infill_step_height = 2
@@ -19,3 +19,4 @@ material_print_temperature = =default_material_print_temperature + 10
 retraction_amount = 3.5
 retraction_speed = 45
 top_layers = 4
+

resources/quality/dagoma/dagoma_pro_430_bowden_steel_0.8_pla_h0.6.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_bowden
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
-weight = 1
-material = generic_pla
 variant = Steel 0.8mm
+weight = 1
 
 [values]
 bottom_layers = 2
@@ -23,3 +23,4 @@ speed_wall_x = 25
 top_layers = 3
 wall_line_count = 2
 z_seam_corner = z_seam_corner_none
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_0.4_pla_h0.1.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_pro_430_directdrive
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
-weight = -1
-material = generic_pla
 variant = Brass 0.4mm
+weight = -1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_0.4_pla_h0.2.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_directdrive
+name = Normal
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
-weight = 1
-material = generic_pla
 variant = Brass 0.4mm
+weight = 1
 
 [values]
 infill_pattern = triangles
@@ -19,3 +19,4 @@ material_print_temperature = =default_material_print_temperature + 25
 retraction_amount = 1.5
 speed_print = 65
 wall_line_count = 3
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_0.4_pla_h0.3.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_pro_430_directdrive
+name = Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
-weight = 0
-material = generic_pla
 variant = Brass 0.4mm
+weight = 0
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_0.4_tpu_h0.2.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_directdrive
+name = Normal
+version = 4
 
 [metadata]
+material = generic_tpu
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
-weight = 1
-material = generic_tpu
 variant = Brass 0.4mm
+weight = 1
 
 [values]
 infill_pattern = gyroid
@@ -19,3 +19,4 @@ material_flow = 105
 material_print_temperature = =default_material_print_temperature - 8
 retraction_amount = 3
 speed_print = 30.0
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_0.8_pla_h0.4.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_directdrive
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -1
-material = generic_pla
 variant = Brass 0.8mm
+weight = -1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_0.8_pla_h0.6.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_directdrive
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
-weight = 1
-material = generic_pla
 variant = Brass 0.8mm
+weight = 1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_1.0_pla_h0.4.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_directdrive
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -1
-material = generic_pla
 variant = Brass 1.0mm
+weight = -1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_1.0_pla_h0.6.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_directdrive
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
-weight = 1
-material = generic_pla
 variant = Brass 1.0mm
+weight = 1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_brass_1.0_pla_h0.8.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Coarse
 definition = dagoma_pro_430_directdrive
+name = Coarse
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.8
 setting_version = 20
 type = quality
-quality_type = h0.8
-weight = 0
-material = generic_pla
 variant = Brass 1.0mm
+weight = 0
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_global_h0.1.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_pro_430_directdrive
+name = Fine
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
 weight = 1
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.1
+

resources/quality/dagoma/dagoma_pro_430_directdrive_global_h0.2.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_directdrive
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
 weight = 0
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.2
+

resources/quality/dagoma/dagoma_pro_430_directdrive_global_h0.3.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_pro_430_directdrive
+name = Fast
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
 weight = -1
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.3
+

resources/quality/dagoma/dagoma_pro_430_directdrive_global_h0.4.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_directdrive
+name = Very Fast
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
 weight = -2
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.4
+

resources/quality/dagoma/dagoma_pro_430_directdrive_global_h0.6.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_directdrive
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
 weight = -3
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.6
+

resources/quality/dagoma/dagoma_pro_430_directdrive_global_h0.8.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Coarse
 definition = dagoma_pro_430_directdrive
+name = Coarse
+version = 4
 
 [metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.8
 setting_version = 20
 type = quality
-quality_type = h0.8
 weight = -4
-material = generic_pla
-global_quality = True
 
 [values]
 layer_height = 0.8
+

resources/quality/dagoma/dagoma_pro_430_directdrive_steel_0.4_pla_h0.1.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_pro_430_directdrive
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
-weight = 1
-material = generic_pla
 variant = Steel 0.4mm
+weight = 1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_steel_0.4_pla_h0.2.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_pro_430_directdrive
+name = Normal
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
-weight = 0
-material = generic_pla
 variant = Steel 0.4mm
+weight = 0
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_steel_0.4_pla_h0.3.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_pro_430_directdrive
+name = Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
-weight = -1
-material = generic_pla
 variant = Steel 0.4mm
+weight = -1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_steel_0.8_pla_h0.4.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_pro_430_directdrive
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -1
-material = generic_pla
 variant = Steel 0.8mm
+weight = -1
 
 [values]
+

resources/quality/dagoma/dagoma_pro_430_directdrive_steel_0.8_pla_h0.6.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_pro_430_directdrive
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
-weight = 1
-material = generic_pla
 variant = Steel 0.8mm
+weight = 1
 
 [values]
+

resources/quality/dagoma/dagoma_sigma_0.4_pla_h0.1.inst.cfg

@@ -1,18 +1,19 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_sigma
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
-weight = 1
-material = generic_pla
 variant = 0.4mm
+weight = 1
 
 [values]
 material_print_temperature = =default_material_print_temperature
 retraction_amount = 2.5
 small_feature_speed_factor = 75.0
 small_feature_speed_factor_0 = 35.0
+

resources/quality/dagoma/dagoma_sigma_0.4_pla_h0.2.inst.cfg

@@ -1,18 +1,19 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_sigma
+name = Normal
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
-weight = 0
-material = generic_pla
 variant = 0.4mm
+weight = 0
 
 [values]
 material_print_temperature = =default_material_print_temperature + 5
 retraction_amount = 3.5
 small_feature_speed_factor = 25.0
 small_feature_speed_factor_0 = =small_feature_speed_factor
+

resources/quality/dagoma/dagoma_sigma_0.4_pla_h0.3.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_sigma
+name = Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
-weight = -1
-material = generic_pla
 variant = 0.4mm
+weight = -1
 
 [values]
 material_print_temperature = =default_material_print_temperature + 10
-speed_print = 40
-speed_layer_0 = 17
 speed_infill = 40
+speed_layer_0 = 17
+speed_print = 40
+speed_topbottom = 40
 speed_wall_0 = 30
 speed_wall_x = 40
-speed_topbottom = 40
+

resources/quality/dagoma/dagoma_sigma_0.8_pla_h0.4.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_sigma
+name = Very Fast
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
-weight = -2
-material = generic_pla
 variant = 0.8mm
+weight = -2
 
 [values]
 material_print_temperature = =default_material_print_temperature + 10
-speed_print = 40
-speed_layer_0 = 17
 speed_infill = 40
+speed_layer_0 = 17
+speed_print = 40
+speed_topbottom = 40
 speed_wall_0 = 30
 speed_wall_x = 40
-speed_topbottom = 40
+

resources/quality/dagoma/dagoma_sigma_0.8_pla_h0.8.inst.cfg

@@ -1,17 +1,18 @@
 [general]
-version = 4
-name = Coarse
 definition = dagoma_sigma
+name = Coarse
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = h0.8
 setting_version = 20
 type = quality
-quality_type = h0.8
-weight = -4
-material = generic_pla
 variant = 0.8mm
+weight = -4
 
 [values]
 material_flow_layer_0 = 80
 material_print_temperature = =default_material_print_temperature + 40
 material_print_temperature_layer_0 = =default_material_print_temperature + 35
+

resources/quality/dagoma/dagoma_sigma_global_h0.1.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fine
 definition = dagoma_sigma
+name = Fine
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = h0.1
 setting_version = 20
 type = quality
-quality_type = h0.1
 weight = 1
-global_quality = True
 
 [values]
 layer_height = 0.1
+

resources/quality/dagoma/dagoma_sigma_global_h0.2.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = dagoma_sigma
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = h0.2
 setting_version = 20
 type = quality
-quality_type = h0.2
 weight = 0
-global_quality = True
 
 [values]
 layer_height = 0.2
+

resources/quality/dagoma/dagoma_sigma_global_h0.3.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Fast
 definition = dagoma_sigma
+name = Fast
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = h0.3
 setting_version = 20
 type = quality
-quality_type = h0.3
 weight = -1
-global_quality = True
 
 [values]
 layer_height = 0.3
+

resources/quality/dagoma/dagoma_sigma_global_h0.4.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Very Fast
 definition = dagoma_sigma
+name = Very Fast
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = h0.4
 setting_version = 20
 type = quality
-quality_type = h0.4
 weight = -2
-global_quality = True
 
 [values]
 layer_height = 0.4
+

resources/quality/dagoma/dagoma_sigma_global_h0.6.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft
 definition = dagoma_sigma
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = h0.6
 setting_version = 20
 type = quality
-quality_type = h0.6
 weight = -3
-global_quality = True
 
 [values]
 layer_height = 0.6
+

resources/quality/dagoma/dagoma_sigma_global_h0.8.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Coarse
 definition = dagoma_sigma
+name = Coarse
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = h0.8
 setting_version = 20
 type = quality
-quality_type = h0.8
 weight = -4
-global_quality = True
 
 [values]
 layer_height = 0.8
+

resources/variants/dagoma_pro_430_bowden_brass_0.4.inst.cfg

@@ -1,12 +1,12 @@
 [general]
+definition = dagoma_pro_430_bowden
 name = Brass 0.4mm
 version = 4
-definition = dagoma_pro_430_bowden
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 acceleration_enabled = True
@@ -44,8 +44,8 @@ initial_layer_line_width_factor = 100
 jerk_enabled = False
 layer_height_0 = 0.25
 line_width = =machine_nozzle_size
-machine_nozzle_size = 0.4
 machine_nozzle_id = Brass 0.4mm
+machine_nozzle_size = 0.4
 material_bed_temperature = 50
 material_bed_temperature_layer_0 = 80
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -92,8 +92,8 @@ support_fan_enable = True
 support_infill_rate = 15
 support_pattern = zigzag
 support_structure = normal
-support_type = buildplate
 support_top_distance = 0.1
+support_type = buildplate
 support_xy_distance = 1.5
 support_xy_overrides_z = xy_overrides_z
 top_bottom_thickness = 0.8
@@ -104,3 +104,4 @@ wall_line_count = 2
 wall_thickness = =line_width * 2
 z_seam_corner = z_seam_corner_inner
 zig_zaggify_infill = False
+

resources/variants/dagoma_pro_430_bowden_brass_0.8.inst.cfg

@@ -1,12 +1,12 @@
 [general]
+definition = dagoma_pro_430_bowden
 name = Brass 0.8mm
 version = 4
-definition = dagoma_pro_430_bowden
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 adhesion_type = none
@@ -24,8 +24,8 @@ inset_direction = inside_out
 jerk_enabled = True
 jerk_infill = 10
 line_width = 0.7
-machine_nozzle_size = 0.8
 machine_nozzle_id = Brass 0.8mm
+machine_nozzle_size = 0.8
 material_flow_layer_0 = 150
 retraction_speed = 30
 roofing_layer_count = 1
@@ -39,3 +39,4 @@ wall_line_count = 2
 z_seam_corner = z_seam_corner_none
 z_seam_position = backleft
 z_seam_type = sharpest_corner
+

resources/variants/dagoma_pro_430_bowden_brass_1.0.inst.cfg

@@ -1,12 +1,12 @@
 [general]
+definition = dagoma_pro_430_bowden
 name = Brass 1.0mm
 version = 4
-definition = dagoma_pro_430_bowden
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 adhesion_type = none
@@ -24,8 +24,8 @@ jerk_enabled = True
 jerk_infill = 10
 layer_height_0 = 0.3
 line_width = 0.9
-machine_nozzle_size = 1.0
 machine_nozzle_id = Brass 1.0mm
+machine_nozzle_size = 1.0
 material_print_temperature_layer_0 = =default_material_print_temperature + 25
 retraction_speed = 30
 roofing_layer_count = 1
@@ -39,3 +39,4 @@ wall_line_count = 2
 z_seam_corner = z_seam_corner_none
 z_seam_position = backleft
 z_seam_type = sharpest_corner
+

resources/variants/dagoma_pro_430_bowden_steel_0.4.inst.cfg

@@ -1,12 +1,12 @@
 [general]
+definition = dagoma_pro_430_bowden
 name = Steel 0.4mm
 version = 4
-definition = dagoma_pro_430_bowden
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 acceleration_enabled = True
@@ -41,11 +41,11 @@ infill_sparse_thickness = 0.4
 infill_wall_line_count = 1
 infill_wipe_dist = 0.2
 initial_layer_line_width_factor = 100
-line_width = =machine_nozzle_size
 jerk_enabled = False
 layer_height_0 = 0.25
-machine_nozzle_size = 0.4
+line_width = =machine_nozzle_size
 machine_nozzle_id = Steel 0.4mm
+machine_nozzle_size = 0.4
 material_bed_temperature = 50
 material_bed_temperature_layer_0 = 80
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -101,3 +101,4 @@ wall_line_count = 2
 wall_thickness = =line_width * 2
 z_seam_corner = z_seam_corner_inner
 zig_zaggify_infill = False
+

resources/variants/dagoma_pro_430_bowden_steel_0.8.inst.cfg

@@ -1,17 +1,18 @@
 [general]
+definition = dagoma_pro_430_bowden
 name = Steel 0.8mm
 version = 4
-definition = dagoma_pro_430_bowden
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 adhesion_type = none
 infill_before_walls = False
 line_width = 0.7
-machine_nozzle_size = 0.8
 machine_nozzle_id = Steel 0.8mm
+machine_nozzle_size = 0.8
 speed_print = 50
+

resources/variants/dagoma_pro_430_directdrive_brass_0.4.inst.cfg

@@ -1,16 +1,17 @@
 [general]
+definition = dagoma_pro_430_directdrive
 name = Brass 0.4mm
 version = 4
-definition = dagoma_pro_430_directdrive
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 adhesion_type = none
 infill_before_walls = False
-machine_nozzle_size = 0.4
 machine_nozzle_id = Brass 0.4mm
+machine_nozzle_size = 0.4
 retraction_speed = 10
+

resources/variants/dagoma_pro_430_directdrive_brass_0.8.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_directdrive
 name = Brass 0.8mm
 version = 4
-definition = dagoma_pro_430_directdrive
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.8
 machine_nozzle_id = Brass 0.8mm
+machine_nozzle_size = 0.8
+

resources/variants/dagoma_pro_430_directdrive_brass_1.0.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_directdrive
 name = Brass 1.0mm
 version = 4
-definition = dagoma_pro_430_directdrive
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 1.0
 machine_nozzle_id = Brass 1.0mm
+machine_nozzle_size = 1.0
+

resources/variants/dagoma_pro_430_directdrive_steel_0.4.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_directdrive
 name = Steel 0.4mm
 version = 4
-definition = dagoma_pro_430_directdrive
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.4
 machine_nozzle_id = Steel 0.4mm
+machine_nozzle_size = 0.4
+

resources/variants/dagoma_pro_430_directdrive_steel_0.8.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_directdrive
 name = Steel 0.8mm
 version = 4
-definition = dagoma_pro_430_directdrive
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.8
 machine_nozzle_id = Steel 0.8mm
+machine_nozzle_size = 0.8
+

resources/variants/dagoma_pro_430_dual_brass_0.4.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_dual
 name = Brass 0.4mm
 version = 4
-definition = dagoma_pro_430_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.4
 machine_nozzle_id = Brass 0.4mm
+machine_nozzle_size = 0.4
+

resources/variants/dagoma_pro_430_dual_brass_0.8.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_dual
 name = Brass 0.8mm
 version = 4
-definition = dagoma_pro_430_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.8
 machine_nozzle_id = Brass 0.8mm
+machine_nozzle_size = 0.8
+

resources/variants/dagoma_pro_430_dual_brass_1.0.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_dual
 name = Brass 1.0mm
 version = 4
-definition = dagoma_pro_430_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 1.0
 machine_nozzle_id = Brass 1.0mm
+machine_nozzle_size = 1.0
+

resources/variants/dagoma_pro_430_dual_steel_0.4.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_dual
 name = Steel 0.4mm
 version = 4
-definition = dagoma_pro_430_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.4
 machine_nozzle_id = Steel 0.4mm
+machine_nozzle_size = 0.4
+

resources/variants/dagoma_pro_430_dual_steel_0.8.inst.cfg

@@ -1,13 +1,14 @@
 [general]
+definition = dagoma_pro_430_dual
 name = Steel 0.8mm
 version = 4
-definition = dagoma_pro_430_dual
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.8
 machine_nozzle_id = Steel 0.8mm
+machine_nozzle_size = 0.8
+

resources/variants/dagoma_sigma_0.4.inst.cfg

@@ -1,12 +1,12 @@
 [general]
+definition = dagoma_sigma
 name = 0.4mm
 version = 4
-definition = dagoma_sigma
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 acceleration_enabled = True
@@ -35,8 +35,8 @@ infill_sparse_thickness = 0.4
 infill_wall_line_count = 1
 layer_height_0 = 0.25
 line_width = 0.4
-machine_nozzle_size = 0.4
 machine_nozzle_id = 0.4mm
+machine_nozzle_size = 0.4
 retract_at_layer_change = True
 retraction_combing = noskin
 retraction_combing_max_distance = 5.0
@@ -73,3 +73,4 @@ top_bottom_thickness = 0.8
 top_thickness = 0.8
 travel_avoid_distance = 3.0
 travel_avoid_supports = True
+

resources/variants/dagoma_sigma_0.8.inst.cfg

@@ -1,12 +1,12 @@
 [general]
+definition = dagoma_sigma
 name = 0.8mm
 version = 4
-definition = dagoma_sigma
 
 [metadata]
+hardware_type = nozzle
 setting_version = 20
 type = variant
-hardware_type = nozzle
 
 [values]
 gradual_infill_steps = 0
@@ -15,8 +15,8 @@ infill_pattern = grid
 infill_sparse_density = 10
 inset_direction = inside_out
 line_width = 0.7
-machine_nozzle_size = 0.8
 machine_nozzle_id = 0.8mm
+machine_nozzle_size = 0.8
 roofing_layer_count = 1
 speed_infill = 35
 speed_print = 40
@@ -28,3 +28,4 @@ top_bottom_thickness = 0.8
 top_layers = 4
 wall_line_count = 2
 z_seam_corner = z_seam_corner_none
+