From 46e3fb3c21c98ab90161d8e6eb8af13c32e8fa0a Mon Sep 17 00:00:00 2001 From: HellAholic Date: Tue, 27 May 2025 16:09:01 +0200 Subject: [PATCH] Ensure the overrides remain the same with the inheritance change. Some overrides are different for the ultimaker_original compared to the ultimaker base This ensures that with changing the inheritance those overrides retain the original value :P So the result would be only change in the inheritance by name rather than by the values. --- resources/definitions/ultimaker_original_dual.def.json | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/resources/definitions/ultimaker_original_dual.def.json b/resources/definitions/ultimaker_original_dual.def.json index 0b9ee112d7..c64238a678 100644 --- a/resources/definitions/ultimaker_original_dual.def.json +++ b/resources/definitions/ultimaker_original_dual.def.json @@ -49,7 +49,10 @@ }, "overrides": { + "cool_fan_speed_0": { "value": "cool_fan_speed_min" }, "gantry_height": { "value": "55" }, + "infill_before_walls": { "value": "True" }, + "layer_height_0": { "value": "max(0.2, layer_height)" }, "machine_center_is_zero": { "default_value": false }, "machine_depth": { "default_value": 195 }, "machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" }, @@ -68,6 +71,8 @@ "machine_name": { "default_value": "Ultimaker Original Dual Extrusion" }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_use_extruder_offset_to_offset_coords": { "default_value": true }, - "machine_width": { "default_value": 205 } + "machine_width": { "default_value": 205 }, + "material_print_temp_wait": { "value": false }, + "speed_slowdown_layers": { "value": 1 } } } \ No newline at end of file