diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
index 601886a065..008a119dd2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = -1
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -41,7 +46,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
index bb303eeb33..2b585a73ba 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = 0
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -42,7 +47,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
index 85c37d439d..1932cf7213 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = -2
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -41,7 +46,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
index 5d6ce58f7c..c2e0ba68af 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -2
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
@@ -36,7 +41,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
index 1b69ada75d..156d645694 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -3
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -37,7 +42,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
index d678d7e178..0f1e8357b3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -4
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -37,7 +42,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
index db01865cf8..d718e44a02 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = -1
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -41,7 +46,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
index 27a8bb863b..55a724e260 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = 0
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -42,7 +47,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
index cf3069ee0f..591e8e91bd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = -2
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -41,7 +46,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
index 2491d0ed88..941bfb3736 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -2
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
@@ -36,7 +41,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
index e975175ce0..11db9e5a62 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -3
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -37,7 +42,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
index 5334fac1f0..ac2049daae 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -4
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -36,7 +41,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2