Update nwa3d_a5_fast.inst.cfg

resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg

@@ -11,115 +11,118 @@ weight = -1
 global_quality = True
 
 [values]
-layer_height = 0.25
+layer_height = 0.24
-initial_layer_height = 0.25
+layer_height_0 = 0.24
 line_width = 0.4
-initial_layer_line_width = 100
+wall_line_width_0 = 100
 wall_thickness = 0.8
-outer_wall_wipe_distance = 0.2
+wall_0_wipe_dist = 0.2
-top_surface_skin_layers = 1
+roofing_layer_count = 1
 top_bottom_thickness = 0.6
 top_thickness = 0.8
 top_layers = 5
 bottom_thickness = 0.6
 bottom_layers = 3
 top_bottom_pattern = lines
-bottom_pattern_initial_layer = lines
+top_bottom_pattern_0 = lines
-outer_wall_inset = 0
+wall_0_inset = 0
 optimize_wall_printing_order = false
-outer_before_inner_walls = false
+outer_inset_first = false
-alternate_extra_wall = false
+alternate_extra_perimeter = false
-compensate_wall_overlaps = true
+travel_compensate_overlapping_walls_enabled = true
-compensate_outer_wall_overlaps = true
+travel_compensate_overlapping_walls_0_enabled = true
-compensate_inner_wall_overlaps = true
+travel_compensate_overlapping_walls_x_enabled = true
-minimum_wall_flow = 0
+wall_min_flow = 0
-fill_gaps_between_walls = everywhere
+fill_perimeter_gaps = everywhere
 filter_out_tiny_gaps = true
-print_thin_walls = true
+fill_outline_gaps = true
-horizontal_expansion = 0
+xy_offset = 0
-ignore_small_z_gaps = true
+skin_no_small_gaps_heuristic = true
-extra_skin_wall_count = 1
+skin_outline_count = 1
-enable_ironing = false
+ironing_enabled = false
-infill_density = 15
+infill_sparse_density = 15
-connect_infill_lines = false
+zig_zaggify_infill = false
-infill_line_multiplier = 1
+infill_multiplier = 1
-extra_infill_wall_count = 0
+infill_wall_line_count = 0
-infill_overlap_percentage = 10
+infill_overlap = 10
-skin_overlap_percentage = 5
+skin_overlap = 5
-infill_wipe_distance = 0.1
+infill_wipe_dist = 0.1
 gradual_infill_steps = 0
 infill_before_walls = false
-infill_support = false
+infill_support_enabled = false
-maximum_skin_angle_for_expansion = 90
+max_skin_angle_for_expansion = 90
 material_diameter = 1.75
-default_printing_temperature = 220
+default_material_print_temperature = 220
-initial_printing_temperature = 220
+material_print_temperature = 220
-final_printing_temperature = 220
+material_print_temperature_layer_0 = 220
-default_build_plate_temperature = 0
+material_initial_print_temperature = 220
-build_plate_temperature = 0
+material_final_print_temperature = 220
-flow = 100
+default_material_bed_temperature = 0
-enable_retraction = true
+material_bed_temperature = 0
+material_flow = 100
+retraction_enable = true
 retract_at_layer_change = false
-retraction_distance = 5
+retraction_amount = 5
 retraction_speed = 45
 retraction_extra_prime_amount = 0
-retraction_minimum_travel = 0.8
+retraction_min_travel = 0.8
-maximum_retraction_count = 90
+retraction_count_max = 90
-minimum_extrusion_distance_window = 5
+retraction_extrusion_window = 5
 limit_support_retractions = true
-nozzle_switch_retraction_distance = 16
+switch_extruder_retraction_amount = 16
-nozzle_switch_retraction_speed = 20
+switch_extruder_retraction_speeds = 20
-print_speed = 60
+speed_print = 60
-travel_speed = 150
+speed_travel = 150
-initial_layer_speed = 10
+speed_layer_0 = 10
-initial_layer_travel_speed = 50
+speed_travel_layer_0 = 50
-maximum_z_speed = 0
+max_feedrate_z_override = 0
-number_of_slower_layers = 2
+speed_slowdown_layers = 2
-equalize_filament_flow = false
+speed_equalize_flow_enabled = false
-enable_acceleration_control = false
+acceleration_enabled = false
-enable_jerk_control = false
+acceleration_roofing = 3000
-combing_mode = off
+jerk_enabled = false
-retract_before_outer_wall = false
+retraction_combing = off
-z_hop_when_retracted = false
+travel_retract_before_outer_wall = false
-enable_print_cooling = true
+retraction_hop_enabled = false
-fan_speed = 100
+cool_fan_enabled = true
-initial_fan_speed = 0
+cool_fan_speed = 100
-regular_fan_speed_at_height = 0.5
+cool_fan_speed_0 = 0
-regular_fan_speed_at_layer = 2
+cool_fan_full_at_height = 0.48
-lift_head = false
+cool_fan_full_at_layer = 2
-generate_support = true
+cool_lift_head = false
-support_placement = everywhere
+support_enable = true
-support_overhang_angle = 50
+support_type = everywhere
+support_angle = 50
 support_pattern = grid
-support_wall_line_count = 0
+support_wall_count = 0
-connect_support_lines = false
+zig_zaggify_support = false
-support_density = 15
+support_infill_rate = 15
-support_infill_line_direction = 0
+support_infill_angle = 0
-enable_support_brim = true
+support_brim_enable = true
 support_brim_line_count = 5
 support_z_distance = 0.3
-support_x_y_distance = 0.7
+support_xy_distance = 0.7
-minimum_support_x_y_distance = 0.2
+support_xy_distance_overhang = 0.2
-support_stair_step_height = 0.3
+support_bottom_stair_step_height = 0.3
-support_stair_step_maximum_width = 5.0
+support_bottom_stair_step_width = 5.0
 support_join_distance = 2.0
-support_horizontal_expansion = 0.2
+support_offset = 0.2
 gradual_support_infill_steps = 0
-enable_support_roof = true
+support_roof_enable = true
-enable_support_floor = false
+support_bottom_enable = false
-support_roof_thickness = 0.45
+support_roof_height = 0.45
 support_roof_density = 45
 support_roof_pattern = lines
-fan_speed_override = false
+support_fan_enable = false
-use_towers = true
+support_use_towers = true
-tower_diameter = 3
+support_tower_diameter = 3
-tower_roof_angle = 65
+support_tower_roof_angle = 65
-build_plate_adhesion_type = skirt
+adhesion_type = skirt
 skirt_line_count = 2
-skirt_distance = 3
+skirt_gap = 3
-union_overlapping_volumes = true
+meshfix_union_all = true
-remove_all_holes = false
+meshfix_union_all_remove_holes = false
-extensive_stiching = false
+meshfix_extensive_stitching = false
-keep_disconnected_faces = false
+meshfix_keep_open_polygons = false
-merged_meshes_overlap = 0.15
+multiple_mesh_overlap = 0.16
-remove_mesh_intersection = false
+carve_multiple_volumes = false