Merge pull request #11022 from reibuehl/master

Updated Profiles and Start and End G-Code to fix an issue with premature heatup

resources/definitions/tinyboy_fabrikator15.def.json

@@ -9,7 +9,8 @@
         "file_formats": "text/x-gcode",
         "platform": "tinyboy_fabrikator15.stl",
         "platform_offset": [-95, -3, -46],
-        "has_materials": false,
+        "has_materials": true,
+        "preferred_material": "generic_pla_175",
         "has_machine_quality": true,
         "preferred_quality_type": "normal",
         "machine_extruder_trains":
@@ -33,12 +34,10 @@
         "gantry_height": { "value": 45 },
         "machine_center_is_zero": { "default_value": false },
          "machine_start_gcode": {
-            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F{travel_speed} ;move the printhead up 15mm\nG92 E0                  ;zero the extruded length\n;M109 S{print_temperature} ;set extruder temperature\nG1 F200 E30              ;extrude 30mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Printing..."
+            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F6000 ;move the printhead up 15mm\nG92 E0                  ;zero the extruded length\nM104 S{material_print_temperature} ;set extruder temperature\nM105\nM109 S{material_print_temperature} ;wait for extruder temperature\nG1 F200 E30              ;extrude 30mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F6000\n;Put printing message on LCD screen\nM117 Printing..."
-
         },
         "machine_end_gcode": {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n;{jobname}"
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n;{jobname}"
-
         }
     }
 }

resources/quality/tinyboy/tinyboy_fabrikator15_draft.inst.cfg

@@ -30,8 +30,6 @@ layer_height = 0.3
 layer_height_0 = 0.3
 material_bed_temperature = 60
 material_diameter = 1.75
-material_print_temperature = 200
-material_print_temperature_layer_0 = 0
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/tinyboy/tinyboy_fabrikator15_high.inst.cfg

@@ -30,8 +30,6 @@ layer_height = 0.1
 layer_height_0 = 0.1
 material_bed_temperature = 60
 material_diameter = 1.75
-material_print_temperature = 200
-material_print_temperature_layer_0 = 0
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/tinyboy/tinyboy_fabrikator15_normal.inst.cfg

@@ -30,8 +30,6 @@ layer_height = 0.2
 layer_height_0 = 0.2
 material_bed_temperature = 60
 material_diameter = 1.75
-material_print_temperature = 210
-material_print_temperature_layer_0 = 0
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075