From 50a0ffa2573ee4a957168cf7bb92e44ca9a6f760 Mon Sep 17 00:00:00 2001 From: Michel Wilhelm Date: Sat, 13 Aug 2022 16:07:56 -0300 Subject: [PATCH] chore: definition file is out of the pattern --- .../definitions/renkforce_rf100_xl.def.json | 122 +++++++++--------- 1 file changed, 60 insertions(+), 62 deletions(-) diff --git a/resources/definitions/renkforce_rf100_xl.def.json b/resources/definitions/renkforce_rf100_xl.def.json index f0e8644ae4..a8cad09618 100644 --- a/resources/definitions/renkforce_rf100_xl.def.json +++ b/resources/definitions/renkforce_rf100_xl.def.json @@ -7,66 +7,64 @@ "file_formats": "text/x-gcode", "manufacturer": "Renkforce", "visible": true, - "machine_extruder_trains": - { + "machine_extruder_trains": { "0": "renkforce_rf100_xl_extruder_0" } }, - "overrides": { "adhesion_type": { "default_value": "skirt" }, "bottom_thickness": { - "value": "0.6" + "value": 0.6 }, "brim_width": { - "value": "3.0" + "value": 3.0 }, "cool_fan_enabled": { - "value": "True" + "value": true }, "cool_fan_full_at_height": { - "value": "0.5" + "value": 0.5 }, "cool_fan_speed_max": { - "value": "100.0" + "value": 100.0 }, "cool_fan_speed_min": { - "value": "100.0" + "value": 100.0 }, "cool_lift_head": { - "value": "True" + "value": true }, "cool_min_layer_time": { - "value": "1.0" + "value": 1.0 }, "cool_min_speed": { - "value": "5.0" + "value": 5.0 }, "infill_before_walls": { - "value": "True" + "value": true }, "infill_line_width": { - "value": "0.6" + "value": 0.6 }, "infill_overlap": { - "value": "15.0" + "value": 15.0 }, "infill_sparse_density": { - "value": "26.0" + "value": 26.0 }, "ironing_enabled": { - "value": "True" + "value": true }, "layer_0_z_overlap": { - "value": "0.11" + "value": 0.11 }, "layer_height_0": { - "value": "0.3" + "value": 0.3 }, "machine_depth": { - "value": "200" + "value": 200 }, "machine_end_gcode": { "default_value": ";End GCode\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-4 F300 ;move Z up a bit and retract filament even more\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG0 Z{machine_height} F1800 ;move the platform all the way down\nG28 X0 Y0 F1800 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM117 Done" @@ -75,10 +73,10 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_heated_bed": { - "default_value": "true" + "default_value": true }, "machine_height": { - "value": "200" + "value": 200 }, "machine_name": { "default_value": "Renkforce RF100 XL" @@ -87,112 +85,112 @@ "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG1 Z5.0 F1800 ;move Z to 5mm\nG28 X0 Y0 F1800 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstop\nG92 E0 ;zero the extruded length\nG1 F200 E6.0 ;extrude 6.0mm of feed stock to build pressure\nG1 Z5.0 F300 ;move the platform down 5mm\nG92 E0 ;zero the extruded length again\nG1 F1800\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_width": { - "value": "200" + "value": 200 }, "material_bed_temperature": { - "value": "70" + "value": 70 }, "material_print_temperature": { - "value": "210.0" + "value": 210.0 }, "ooze_shield_enabled": { - "value": "True" + "value": true }, "raft_airgap": { - "value": "0.33" + "value": 0.33 }, "raft_base_line_spacing": { - "value": "3.0" + "value": 3.0 }, "raft_base_line_width": { - "value": "1.0" + "value": 1.0 }, "raft_base_thickness": { - "value": "0.3" + "value": 0.3 }, "raft_interface_line_spacing": { - "value": "3.0" + "value": 3.0 }, "raft_interface_line_width": { - "value": "0.4" + "value": 0.4 }, "raft_interface_thickness": { - "value": "0.27" + "value": 0.27 }, "raft_margin": { - "value": "6.0" + "value": 6.0 }, "raft_speed": { - "value": "20.0" + "value": 20.0 }, "raft_surface_layers": { - "value": "2" + "value": 2 }, "raft_surface_line_spacing": { - "value": "0.4" + "value": 0.4 }, "raft_surface_line_width": { - "value": "0.4" + "value": 0.4 }, "raft_surface_thickness": { - "value": "0.1" + "value": 0.1 }, "retraction_amount": { - "value": "5.0" + "value": 5.0 }, "retraction_combing": { - "value": "'all'" + "value": "all" }, "retraction_enable": { - "value": "True" + "value": true }, "retraction_min_travel": { - "value": "1.5" + "value": 1.5 }, "skin_overlap": { - "value": "15.0" + "value": 15.0 }, "skirt_brim_minimal_length": { - "value": "150.0" + "value": 150.0 }, "skirt_gap": { - "value": "3.0" + "value": 3.0 }, "skirt_line_count": { - "value": "3" + "value": 3 }, "speed_infill": { - "value": "50.0" + "value": 50.0 }, "speed_layer_0": { - "value": "15.0" + "value": 15.0 }, "speed_print": { - "value": "50.0" + "value": 50.0 }, "speed_topbottom": { - "value": "30.0" + "value": 30.0 }, "speed_travel": { - "value": "50.0" + "value": 50.0 }, "speed_wall_0": { - "value": "25.0" + "value": 25.0 }, "speed_wall_x": { - "value": "35.0" + "value": 35.0 }, "support_angle": { - "value": "60.0" + "value": 60.0 }, "support_enable": { - "value": "False" + "value": false }, "support_infill_rate": { "value": "15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15" }, "support_line_width": { - "value": "0.6" + "value": 0.6 }, "support_pattern": { "default_value": "lines" @@ -201,16 +199,16 @@ "default_value": "everywhere" }, "support_xy_distance": { - "value": "0.7" + "value": 0.7 }, "support_z_distance": { - "value": "0.35" + "value": 0.35 }, "top_bottom_thickness": { - "value": "0.8" + "value": 0.8 }, "wall_thickness": { - "value": "0.8" + "value": 0.8 } } -} +} \ No newline at end of file