diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
index 95f93e2bc8..4221372d79 100644
--- a/resources/definitions/ultimaker_method_base.def.json
+++ b/resources/definitions/ultimaker_method_base.def.json
@@ -145,6 +145,8 @@
         "bridge_enable_more_layers": { "value": true },
         "bridge_fan_speed_2": { "value": "(cool_fan_speed_max + cool_fan_speed_min) / 2" },
         "bridge_skin_density": { "value": 100 },
+        "bridge_skin_density_2": { "value": 100 },
+        "bridge_skin_density_3": { "value": 100 },
         "bridge_skin_material_flow": { "value": "material_flow" },
         "bridge_skin_material_flow_2": { "value": "material_flow" },
         "bridge_skin_material_flow_3": { "value": "material_flow" },
@@ -530,8 +532,11 @@
             "enabled": false,
             "value": "min(extruderValues('extruder_nr'))"
         },
+        "skirt_brim_line_width": { "value": 1 },
         "skirt_brim_material_flow": { "value": "material_flow" },
         "skirt_brim_minimal_length": { "value": 500 },
+        "skirt_gap": { "value": 2 },
+        "skirt_height": { "value": 3 },
         "small_skin_width": { "value": 4 },
         "speed_equalize_flow_width_factor": { "value": 0 },
         "speed_prime_tower": { "value": "speed_topbottom" },
diff --git a/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg
index 205b273eda..1743940741 100644
--- a/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -42,13 +39,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg
index c411ef0cb5..fba19a3ab8 100644
--- a/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -42,13 +39,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg
index 46742b7589..64b34caffa 100644
--- a/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -42,13 +39,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg
index 73af8bcbf2..c603e06f3c 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -42,13 +39,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg
index deee76d6c6..0ffed940a1 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -42,13 +39,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg
index 05aecd0542..235b4bca45 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -42,13 +39,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg
index fa8a3ea69c..7d69659208 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -40,13 +37,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg
index a8183e2e87..86b7399b21 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -40,13 +37,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg
index 2fcd1a6e5a..6b0ad8591d 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg
@@ -13,14 +13,11 @@ weight = -2
 
 [values]
 cool_fan_enabled = True
-cool_fan_speed = 100
 cool_fan_speed_0 = 0
 cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = =default_material_print_temperature - 5
-material_initial_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
@@ -40,13 +37,8 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 90
-raft_surface_wall_count = 2
 raft_surface_z_offset = -0.1
 seam_overhang_angle = 35
-skirt_brim_line_width = 1
-skirt_brim_minimal_length = 200
-skirt_gap = 2.0
-skirt_height = 1
 speed_layer_0 = 15
 speed_print = 150
 speed_roofing = =speed_print / 3