Also remove not-existing-anymore settings from definitions and the like.

CURA-7279

resources/definitions/erzay3d.def.json

@@ -62,8 +62,6 @@
     "retraction_amount": { "default_value": 6.5 },
 
     "speed_print": { "default_value": 40 },
-    "speed_equalize_flow_enabled": { "default_value": true },
-    "speed_equalize_flow_max": { "default_value": 100 },
 
     "acceleration_print": { "default_value": 1000 },
 

resources/definitions/fusedform_base.def.json

@@ -48,7 +48,6 @@
  	"speed_topbottom": {"value": 40 },
 	"speed_wall": { "value": 35 },
 	"speed_wall_x": { "value": 40 },
-	"speed_equalize_flow_max": { "value": 70 },
 
  	"retraction_enable": {"default_value":true},
 	"retraction_amount": { "default_value": 4 },

resources/definitions/fusedform_doppia_base.def.json

@@ -48,7 +48,6 @@
  	"speed_topbottom": {"value": 40 },
 	"speed_wall": { "value": 35 },
 	"speed_wall_x": { "value": 40 },
-	"speed_equalize_flow_max": { "value": 70 },
 
  	"retraction_enable": {"default_value":true},
 	"retraction_amount": { "default_value": 4 },

resources/definitions/liquid.def.json

@@ -144,7 +144,6 @@
         "retraction_prime_speed": { "value": "35" },
         
         "skin_overlap": { "value": "10" },
-        "speed_equalize_flow_enabled": { "value": "True" },
         "speed_layer_0": { "value": "20" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "value": "35" },

resources/definitions/maker_made_300x.def.json

@@ -92,7 +92,6 @@
         "speed_layer_0": {"value": 10},
         "speed_travel_layer_0": {"value": 50},
         "speed_slowdown_layers": {"value": 2},
-        "speed_equalize_flow_enabled": {"value": false },
         "acceleration_enabled": {"value": false },
         "acceleration_roofing":  {"value": 3000 },
         "jerk_enabled":  {"value": false },

resources/definitions/peopoly_moai.def.json

@@ -209,10 +209,6 @@
         "material_flow_layer_0": {
             "enabled": false
         },
-        "speed_equalize_flow_enabled": {
-            "enabled": false,
-            "value": "False"
-        },
         "draft_shield_enabled": {
             "enabled": false,
             "value": "False"

resources/definitions/skriware_2.def.json

@@ -578,9 +578,6 @@
     "infill_material_flow": {
       "value": "99"
     },
-    "speed_equalize_flow_max": {
-      "default_value": 40
-    },
     "skin_preshrink": {
       "value": "0.0"
     },

resources/definitions/ultimaker_s3.def.json

@@ -131,7 +131,6 @@
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "skin_overlap": { "value": "10" },
-        "speed_equalize_flow_enabled": { "value": "True" },
         "speed_layer_0": { "value": "20" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "value": "35" },

resources/definitions/ultimaker_s5.def.json

@@ -133,7 +133,6 @@
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "skin_overlap": { "value": "10" },
-        "speed_equalize_flow_enabled": { "value": "True" },
         "speed_layer_0": { "value": "20" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "value": "35" },

resources/definitions/winbo_dragonl4.def.json

@@ -107,7 +107,6 @@
         "speed_wall": { "value": "speed_print*wall_line_width_0/line_width" },
         "speed_wall_0": { "value": "math.ceil(speed_wall * 0.6)" },
         "speed_wall_x": { "value": "speed_wall" },
-        "speed_equalize_flow_enabled": { "value": "False" },
         "support_angle": { "value": "50" },
         "support_xy_distance": { "value": "1" },
         "support_z_distance": { "value": "max((0.2 if(0.2%layer_height==0) else layer_height*int((0.2+layer_height)/layer_height)),layer_height)" },
@@ -130,6 +129,5 @@
         "support_interface_height": { "value": "0.5" },
         "support_roof_pattern": { "value": "'concentric'" },
         "z_seam_type": { "value": "'shortest'" },
-        "speed_equalize_flow_max": { "value": "65" }
     }
 }

resources/definitions/winbo_mini2.def.json

@@ -107,7 +107,6 @@
         "speed_wall": { "value": "speed_print*wall_line_width_0/line_width" },
         "speed_wall_0": { "value": "math.ceil(speed_wall * 0.6)" },
         "speed_wall_x": { "value": "speed_wall" },
-        "speed_equalize_flow_enabled": { "value": "False" },
         "support_angle": { "value": "50" },
         "support_xy_distance": { "value": "1" },
         "support_z_distance": { "value": "max((0.2 if(0.2%layer_height==0) else layer_height*int((0.2+layer_height)/layer_height)),layer_height)" },
@@ -130,6 +129,5 @@
         "support_interface_height": { "value": "0.5" },
         "support_roof_pattern": { "value": "'concentric'" },
         "z_seam_type": { "value": "'shortest'" },
-        "speed_equalize_flow_max": { "value": "65" }
     }
 }

resources/definitions/winbo_superhelper105.def.json

@@ -96,7 +96,6 @@
         "speed_wall": { "value": "speed_print*wall_line_width_0/line_width" },
         "speed_wall_0": { "value": "math.ceil(speed_wall * 0.6)" },
         "speed_wall_x": { "value": "speed_wall" },
-        "speed_equalize_flow_enabled": { "value": "False" },
         "support_angle": { "value": "50" },
         "support_xy_distance": { "value": "1" },
         "support_z_distance": { "value": "max((0.2 if(0.2%layer_height==0) else layer_height*int((0.2+layer_height)/layer_height)),layer_height)" },
@@ -119,6 +118,5 @@
         "support_interface_height": { "value": "0.5" },
         "support_roof_pattern": { "value": "'concentric'" },
         "z_seam_type": { "value": "'shortest'" },
-        "speed_equalize_flow_max": { "value": "65" }
     }
 }

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -51,8 +51,6 @@ speed_layer_0 = 25
 speed_support = 40
 speed_travel_layer_0 = 45
 speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
 
 retraction_combing = all
 travel_avoid_other_parts = True

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg

@@ -51,8 +51,6 @@ speed_layer_0 = 25
 speed_support = 40
 speed_travel_layer_0 = 45
 speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
 
 retraction_combing = all
 travel_avoid_other_parts = True

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg

@@ -51,8 +51,6 @@ speed_layer_0 = 25
 speed_support = 50
 speed_travel_layer_0 = 45
 speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
 acceleration_enabled = False
 
 retraction_combing = all

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg

@@ -51,8 +51,6 @@ speed_layer_0 = 25
 speed_support = 50
 speed_travel_layer_0 = 45
 speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
 acceleration_enabled = False
 
 retraction_combing = all

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg

@@ -51,8 +51,6 @@ speed_layer_0 = 25
 speed_support = 40
 speed_travel_layer_0 = 45
 speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
 
 retraction_combing = all
 travel_avoid_other_parts = True

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg

@@ -51,8 +51,6 @@ speed_layer_0 = 25
 speed_support = 40
 speed_travel_layer_0 = 45
 speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
 
 retraction_combing = all
 travel_avoid_other_parts = True

resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg

@@ -39,8 +39,6 @@ speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel
 speed_support_interface = =speed_topbottom
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = =speed_print
 
 acceleration_enabled = True
 acceleration_print = 100

resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg

@@ -39,8 +39,6 @@ speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel
 speed_support_interface = =speed_topbottom
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = =speed_print
 
 acceleration_enabled = True
 acceleration_print = 100

resources/quality/key3d/key3d_tyro_best.inst.cfg

@@ -73,7 +73,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/key3d/key3d_tyro_fast.inst.cfg

@@ -72,7 +72,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/key3d/key3d_tyro_normal.inst.cfg

@@ -72,7 +72,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg

@@ -44,7 +44,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg

@@ -73,7 +73,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/nwa3d_a31/nwa3d_a31_e.inst.cfg

@@ -70,7 +70,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 40
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 jerk_enabled = False
 retraction_combing = off

resources/quality/nwa3d_a31/nwa3d_a31_fast.inst.cfg

@@ -73,7 +73,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/nwa3d_a31/nwa3d_a31_normal.inst.cfg

@@ -72,7 +72,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg

@@ -71,7 +71,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg

@@ -71,7 +71,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/nwa3d_a5/nwa3d_a5_normal.inst.cfg

@@ -71,7 +71,6 @@ speed_travel = 150
 speed_layer_0 = 10
 speed_travel_layer_0 = 50
 speed_slowdown_layers = 2
-speed_equalize_flow_enabled = False
 acceleration_enabled = False
 acceleration_roofing = 3000
 jerk_enabled = False

resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -42,7 +42,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 13
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel = 300

resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg

@@ -48,7 +48,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg

@@ -47,7 +47,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -47,7 +47,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -48,7 +48,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -42,7 +42,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 13
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -44,7 +44,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg

@@ -42,7 +42,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 13
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg

@@ -46,7 +46,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg

@@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -44,7 +44,6 @@ retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)

resources/setting_visibility/expert.cfg

@@ -150,8 +150,7 @@ speed_print_layer_0
 speed_travel_layer_0
 skirt_brim_speed
 speed_slowdown_layers
-speed_equalize_flow_enabled
+speed_equalize_flow_width_factor
-speed_equalize_flow_max
 acceleration_enabled
 acceleration_print
 acceleration_infill

resources/variants/liquid_vo08.inst.cfg

@@ -47,7 +47,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = 20
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)

resources/variants/ultimaker3_aa0.8.inst.cfg

@@ -48,7 +48,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = 20
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)

resources/variants/ultimaker3_extended_aa0.8.inst.cfg

@@ -48,7 +48,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = 20
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)

resources/variants/ultimaker_s3_aa0.8.inst.cfg

@@ -48,7 +48,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = 20
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)

resources/variants/ultimaker_s5_aa0.8.inst.cfg

@@ -48,7 +48,6 @@ retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_overlap = 5
-speed_equalize_flow_enabled = True
 speed_layer_0 = 20
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)