diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json
index cc0dca2918..3408c917a6 100755
--- a/resources/definitions/dagoma_discoeasy200.def.json
+++ b/resources/definitions/dagoma_discoeasy200.def.json
@@ -50,7 +50,7 @@
             "default_value": "RepRap"
         },
         "machine_start_gcode": {
-            "default_value": ";Gcode by Cura-by-dagoma for DiscoEASY200 V2.6\nG90   ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{print_temperature}\nM140 S{material_bed_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F3000\n"
+            "default_value": ";Gcode by Cura\nG90   ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{print_temperature}\nM140 S{material_bed_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F3000\n"
         },
         "machine_end_gcode": {
             "default_value": "\nM104 S0\nM106 S255   ;start fan full power\nM140 S0   ;heated bed heater off (if you have it)\n;Home machine\nG91   ;relative positioning\nG1 E-1 F{retraction_speed} ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000  ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107    ;stop fan\n;Shut down motor\nM84   ;shut down motors\n"