From 56b15a284c60cb1ad34309adea0ca6f4fcb90c0c Mon Sep 17 00:00:00 2001
From: "c.lamboo" <casperlamboo@gmail.com>
Date: Wed, 9 Aug 2023 22:52:31 +0200
Subject: [PATCH] Add fluid motion related settings

CURA-10811
---
 resources/definitions/fdmprinter.def.json | 33 +++++++++++++++++++++--
 resources/setting_visibility/expert.cfg   |  4 +++
 2 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index fca9e69310..ac52e9d52f 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -6794,8 +6794,7 @@
                     "maximum_value_warning": "0.3",
                     "settable_per_mesh": true
                 },
-                "meshfix_maximum_extrusion_area_deviation":
-                {
+                "meshfix_maximum_extrusion_area_deviation": {
                     "label": "Maximum Extrusion Area Deviation",
                     "description": "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller.",
                     "type": "float",
@@ -6805,6 +6804,36 @@
                     "minimum_value_warning": "500",
                     "maximum_value_warning": "100000",
                     "settable_per_mesh": true
+                },
+                "meshfix_fluid_motion_enabled": {
+                    "label": "Enable Fluid Motion",
+                    "description": "When enabled tool paths are corrected for printers with smooth motion planners. Small movements that deviate from the general tool path direction are smoothed to improve fluid motions.",
+                    "type": "bool",
+                    "default_value": true
+                },
+                "meshfix_fluid_motion_shift_distance": {
+                    "label": "Fluid Motion Shift Distance",
+                    "description": "Distance points are shifted to smooth the path",
+                    "enabled": "meshfix_fluid_motion_enabled",
+                    "type": "float",
+                    "unit": "mm",
+                    "default_value": 0.3
+                },
+                "meshfix_fluid_motion_small_distance": {
+                    "label": "Fluid Motion Small Distance",
+                    "description": "Distance points are shifted to smooth the path",
+                    "enabled": "meshfix_fluid_motion_enabled",
+                    "unit": "mm",
+                    "type": "float",
+                    "default_value": 0.001
+                },
+                "meshfix_fluid_motion_angle": {
+                    "label": "Fluid Motion Angle",
+                    "description": "Threshold angle of smooth toolpath transitions",
+                    "enabled": "meshfix_fluid_motion_enabled",
+                    "type": "float",
+                    "unit": "\u00b0",
+                    "default_value": 5
                 }
             }
         },
diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg
index 6517728968..9247ad1b9e 100644
--- a/resources/setting_visibility/expert.cfg
+++ b/resources/setting_visibility/expert.cfg
@@ -365,6 +365,10 @@ multiple_mesh_overlap
 carve_multiple_volumes
 alternate_carve_order
 remove_empty_first_layers
+meshfix_fluid_motion_enabled
+meshfix_fluid_motion_shift_distance
+meshfix_fluid_motion_small_distance
+meshfix_fluid_motion_angle
 
 [blackmagic]
 print_sequence