add definition files Blocks

Definition files to add Blocks printers

resources/definitions/blocks_base.def.json

@@ -0,0 +1,200 @@
+{
+  "name": "Blocks Base Printer",
+  "version": 2,
+  "inherits": "fdmprinter",
+  "metadata": {
+    "visible": false,
+    "author": "Blocks Dev Team - J. Grilo",
+    "manufacturer": "Blocks",
+    "file_formats": "text/x-gcode",
+    "first_start_actions": ["MachineSettingsAction"],
+
+    "has_materials": true,
+    "has_variants": true,
+    "has_machine_quality": true,
+
+    "variants_name": "Nozzle Size",
+    "preferred_variant_name": "0.4mm Nozzle",
+    "preferred_quality_type": "normal",
+    "preferred_material": "generic_pla"
+  },
+  "overrides": {
+    "machine_center_is_zero": { "default_value": false },
+
+    "machine_max_feedrate_x": { "value": 500 },
+    "machine_max_feedrate_y": { "value": 500 },
+    "machine_max_feedrate_z": { "value": 10 },
+    "machine_max_feedrate_e": { "value": 50 },
+
+    "machine_max_acceleration_x": { "value": 500 },
+    "machine_max_acceleration_y": { "value": 500 },
+    "machine_max_acceleration_z": { "value": 100 },
+    "machine_max_acceleration_e": { "value": 5000 },
+    "machine_acceleration": { "value": 500 },
+
+    "machine_max_jerk_xy": { "value": 10 },
+    "machine_max_jerk_z": { "value": 0.4 },
+    "machine_max_jerk_e": { "value": 5 },
+
+    "machine_heated_bed": { "default_value": true },
+
+    "material_diameter": { "default_value": 1.75 },
+
+    "acceleration_print": { "value": 500 },
+    "acceleration_travel": { "value": 500 },
+    "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+    "acceleration_roofing": {
+      "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0"
+    },
+
+    "jerk_print": { "value": 8 },
+    "jerk_travel": { "value": "jerk_print" },
+    "jerk_travel_layer_0": { "value": "jerk_travel" },
+
+    "acceleration_enabled": { "value": false },
+    "jerk_enabled": { "value": false },
+
+    "speed_print": { "value": 50.0 },
+    "speed_infill": { "value": "speed_print" },
+    "speed_wall": { "value": "speed_print / 2" },
+    "speed_wall_0": { "value": "speed_wall" },
+    "speed_wall_x": { "value": "speed_wall" },
+    "speed_topbottom": { "value": "speed_print / 2" },
+    "speed_roofing": { "value": "speed_topbottom" },
+    "speed_travel": {
+      "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5"
+    },
+    "speed_layer_0": { "value": 20.0 },
+    "speed_print_layer_0": { "value": "speed_layer_0" },
+    "speed_travel_layer_0": {
+      "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5"
+    },
+    "speed_prime_tower": { "value": "speed_topbottom" },
+    "speed_support": { "value": "speed_wall_0" },
+    "speed_support_interface": { "value": "speed_topbottom" },
+    "speed_z_hop": { "value": 5 },
+
+    "skirt_brim_speed": { "value": "speed_layer_0" },
+
+    "line_width": { "value": "machine_nozzle_size" },
+    "wall_line_width": { "value": "machine_nozzle_size" },
+
+    "optimize_wall_printing_order": { "value": "True" },
+
+    "material_initial_print_temperature": {
+      "value": "material_print_temperature"
+    },
+    "material_final_print_temperature": {
+      "value": "material_print_temperature"
+    },
+    "material_flow": { "value": 100 },
+    "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
+
+    "z_seam_type": { "value": "'back'" },
+    "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
+
+    "infill_sparse_density": { "value": "20" },
+    "infill_pattern": {
+      "value": "'lines' if infill_sparse_density > 50 else 'cubic'"
+    },
+    "infill_before_walls": { "value": false },
+    "infill_overlap": { "value": 30.0 },
+    "skin_overlap": { "value": 10.0 },
+    "infill_wipe_dist": { "value": 0.0 },
+    "wall_0_wipe_dist": { "value": 0.0 },
+
+    "fill_perimeter_gaps": { "value": "'nowhere'" },
+    "fill_outline_gaps": { "value": true },
+    "filter_out_tiny_gaps": { "value": false },
+
+    "retraction_speed": {
+      "deafult_value": 40,
+      "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+      "maximum_value": 200
+    },
+    "retraction_retract_speed": {
+      "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+      "maximum_value": 200
+    },
+    "retraction_prime_speed": {
+      "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+      "maximum_value": 200
+    },
+
+    "alternate_extra_perimeter": { "default_value": true },
+    "roofing_layer_count": { "value": 1 },
+    "infill_enable_travel_optimization": { "default_value": true },
+    "minimum_polygon_circumference": { "default_value": 0.2 },
+    "wall_overhang_angle": { "default_value": 75 },
+    "wall_overhang_speed_factor": { "default_value": 50 },
+
+    "retraction_hop_enabled": { "value": "False" },
+    "retraction_hop": { "value": 0.2 },
+    "retraction_combing": {
+      "value": "'off' if retraction_hop_enabled else 'noskin'"
+    },
+    "retraction_combing_max_distance": { "value": 30 },
+    "travel_avoid_other_parts": { "value": true },
+    "travel_avoid_supports": { "value": true },
+    "travel_retract_before_outer_wall": { "value": true },
+
+    "retraction_enable": { "value": true },
+    "retraction_count_max": { "value": 100 },
+    "retraction_min_travel": { "value": 1.5 },
+
+    "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
+    "cool_fan_enabled": { "value": true },
+    "cool_min_layer_time": { "value": 10 },
+
+    "adhesion_type": { "value": "'skirt'" },
+    "brim_replaces_support": { "value": false },
+    "skirt_gap": { "value": 10.0 },
+    "skirt_line_count": { "value": 3 },
+
+    "adaptive_layer_height_variation": { "value": 0.04 },
+    "adaptive_layer_height_variation_step": { "value": 0.04 },
+
+    "meshfix_maximum_resolution": { "value": "0.01" },
+    "meshfix_maximum_travel_resolution": {
+      "value": "meshfix_maximum_resolution"
+    },
+
+    "support_angle": {
+      "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))"
+    },
+    "support_pattern": { "value": "'zigzag'" },
+    "support_infill_rate": {
+      "value": "0 if support_enable and support_structure == 'tree' else 20"
+    },
+    "support_use_towers": { "value": false },
+    "support_xy_distance": { "value": "wall_line_width_0 * 2" },
+    "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+    "support_z_distance": {
+      "value": "layer_height if layer_height >= 0.16 else layer_height * 2"
+    },
+    "support_top_distance": {
+      "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)"
+    },
+    "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
+    "support_wall_count": { "value": 1 },
+    "support_brim_enable": { "value": true },
+    "support_brim_width": { "value": 4 },
+
+    "support_interface_enable": { "value": true },
+    "support_interface_height": { "value": "layer_height * 4" },
+    "support_interface_density": { "value": 33.333 },
+    "support_interface_pattern": { "value": "'grid'" },
+    "support_interface_skip_height": { "value": 0.2 },
+    "minimum_support_area": { "value": 2 },
+    "minimum_interface_area": { "value": 10 },
+    "top_layers": {
+      "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"
+    },
+    "bottom_layers": {
+      "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))"
+    },
+    "wall_thickness": { "value": "line_width * 2" },
+
+    "skin_monotonic" : { "value": true }
+  }
+}

resources/definitions/blocks_mkii.def.json

@@ -0,0 +1,34 @@
+{
+  "name": "Blocks One MKII",
+  "version": 2,
+  "inherits": "blocks_base",
+  "metadata": {
+    "visible": true,
+
+    "quality_definition": "blocks_base",
+
+    "platform": "blocks_mk2_platform.stl",
+
+    "machine_extruder_trains": {
+      "0": "blocks_mkii_extruder_0"
+    }
+  },
+  "overrides": {
+    "machine_name": { "default_value": "Blocks One MKII" },
+
+    "machine_width": { "default_value": 200 },
+    "machine_height": { "default_value": 210 },
+    "machine_depth": { "default_value": 210 },
+
+    "retraction_retract_speed": { "value": 50, "maximum_value_warning": 130 },
+    "retraction_prime_speed": { "value": 20, "maximum_value_warning": 130 },
+    "speed_print": { "value": 50 },
+
+    "machine_start_gcode": {
+      "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n"
+    },
+    "machine_end_gcode": {
+      "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n"
+    }
+  }
+}

resources/definitions/blocks_pros100.def.json

@@ -0,0 +1,36 @@
+{
+  "name": "Blocks Pro S100",
+  "version": 2,
+  "inherits": "blocks_base",
+  "metadata": {
+    "visible": true,
+
+    "quality_definition": "blocks_base",
+
+    "preferred_variant_name": "0.8mm Nozzle",
+
+    "platform": "blocks_pros100_platform.stl",
+
+    "machine_extruder_trains": {
+      "0": "blocks_pros100_extruder_0"
+    }
+  },
+  "overrides": {
+    "machine_name": { "default_value": "Blocks Pro S100" },
+
+    "machine_width": { "default_value": 1000 },
+    "machine_height": { "default_value": 1000 },
+    "machine_depth": { "default_value": 1000 },
+
+    "retraction_retract_speed": { "value": 50, "maximum_value_warning": 130 },
+    "retraction_prime_speed": { "value": 20, "maximum_value_warning": 130 },
+    "speed_print": { "value": 50 },
+
+    "machine_start_gcode": {
+      "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n"
+    },
+    "machine_end_gcode": {
+      "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n"
+    }
+  }
+}

resources/definitions/blocks_pros30.def.json

@@ -0,0 +1,36 @@
+{
+  "version": 2,
+  "name": "Blocks Pro S30",
+  "inherits": "blocks_base",
+  "metadata": {
+    "visible": true,
+
+    "quality_definition": "blocks_base",
+
+    "platform": "blocks_pros30_platform.stl",
+
+    "machine_extruder_trains": {
+      "0": "blocks_pros30_extruder_0"
+
+      
+    }
+  },
+  "overrides": {
+    "machine_name": { "default_value": "Blocks Pro S30" },
+
+    "machine_width": { "default_value": 310 },
+    "machine_height": { "default_value": 290 },
+    "machine_depth": { "default_value": 310 },
+
+    "retraction_retract_speed": { "value": 40, "maximum_value_warning": 130 },
+    "retraction_prime_speed": { "value": 20, "maximum_value_warning": 130 },
+    "speed_print": { "value": 50 },
+
+    "machine_start_gcode": {
+      "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n"
+    },
+    "machine_end_gcode": {
+      "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n"
+    }
+  }
+}

resources/definitions/blocks_r21.def.json

@@ -0,0 +1,41 @@
+{
+  "name": "Blocks R21",
+  "version": 2,
+  "inherits": "blocks_base",
+  "metadata": {
+    "visible": true,
+    "first_start_actions": ["MachineSettingsAction"],
+    "has_materials": true,
+    "has_variants": true,
+    "has_machine_quality": true,
+    "preferred_variant_name": "ST - 0.4mm",
+    "preferred_quality_type": "normal",
+    "preferred_material": "generic_pla",
+    "variants_name": "Print Core",
+    "quality_definition": "blocks_base",
+    
+    "platform": "blocks_r21_platform.stl",
+
+    "machine_extruder_trains": {
+      "0": "blocks_r21_extruder_0"
+    }
+  },
+  "overrides": {
+    "machine_name": { "default_value": "Blocks R21" },
+
+    "machine_width": { "default_value": 300 },
+    "machine_height": { "default_value": 250 },
+    "machine_depth": { "default_value": 210 },
+
+    "retraction_retract_speed": { "value": 50, "maximum_value_warning": 130 },
+    "retraction_prime_speed": { "value": 20, "maximum_value_warning": 130 },
+    "speed_print": { "value": 50 },
+
+    "machine_start_gcode": {
+      "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n"
+    },
+    "machine_end_gcode": {
+      "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n"
+    }
+  }
+}

resources/definitions/blocks_zero.def.json

@@ -0,0 +1,36 @@
+{
+  "name": "Blocks Zero",
+  "version": 2,
+  "inherits": "blocks_base",
+  "metadata": {
+    "visible": true,
+
+    "quality_definition": "blocks_base",
+
+    "platform": "blocks_zero_platform.stl",
+
+    "machine_extruder_trains": {
+      "0": "blocks_zero_extruder_0"
+    }
+  },
+  "overrides": {
+    "machine_name": { "default_value": "Blocks Zero" },
+
+    "machine_heated_bed": { "default_value": false },
+
+    "machine_width": { "default_value": 120 },
+    "machine_height": { "default_value": 120 },
+    "machine_depth": { "default_value": 140 },
+
+    "retraction_retract_speed": { "value": 50, "maximum_value_warning": 130 },
+    "retraction_prime_speed": { "value": 20, "maximum_value_warning": 130 },
+    "speed_print": { "value": 50 },
+
+    "machine_start_gcode": {
+      "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n"
+    },
+    "machine_end_gcode": {
+      "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n"
+    }
+  }
+}