From 59d3c6b165fdd9522667cc3f504f1fbdc90fffca Mon Sep 17 00:00:00 2001 From: Rijk van Manen Date: Mon, 30 May 2022 13:47:45 +0200 Subject: [PATCH] entirely remove the top_thickness statement This is a cleanup which will be investigated further in PP-23 --- .../quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg | 1 - .../quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg | 1 - 2 files changed, 2 deletions(-) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 1ef240ab01..bdfd6aadea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -23,6 +23,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -top_thickness = =0.8 if infill_sparse_density < 30 else top_bottom_thickness infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index bb5862ae67..bedfaa177a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -24,7 +24,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -top_thickness = =0.8 if infill_sparse_density < 30 else top_bottom_thickness infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100