align cool_min_temperature and material_final_printing_temperature

Both the material_final_printing_temperature and the cool_min_temperature are 15deg lower as the printing temperature. Except for TPU and PP.
PP-71

resources/definitions/ultimaker2_plus_connect.def.json

@@ -101,11 +101,6 @@
         "machine_width": { "default_value": 223 },
         "material_bed_temperature": { "maximum_value": 110 },
         "material_bed_temperature_layer_0": { "maximum_value": 110 },
-        "material_final_print_temperature":
-        {
-            "maximum_value": 260,
-            "value": "material_print_temperature"
-        },
         "material_initial_print_temperature":
         {
             "maximum_value": 260,

resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ weight = 0
 [values]
 cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
-material_final_print_temperature = =material_print_temperature - 5
 retraction_prime_speed = 25
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 

resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = 190
 retraction_hop = 0.2

resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature - 15
 skin_overlap = 5

resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg

@@ -14,7 +14,6 @@ weight = -2
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = False

resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg

@@ -14,7 +14,6 @@ weight = -1
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False

resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg

@@ -14,7 +14,6 @@ weight = 1
 [values]
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 prime_tower_enable = False

resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 prime_tower_enable = False
 speed_print = 55

resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg

@@ -19,7 +19,6 @@ layer_height = 0.06
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -18,7 +18,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 skin_overlap = 20

resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 speed_print = 60

resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg

@@ -14,7 +14,6 @@ weight = 1
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 adhesion_type = brim
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40

resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 adhesion_type = brim
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40

resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -13,7 +13,6 @@ weight = 1
 
 [values]
 adhesion_type = brim
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.25

resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 adhesion_type = brim
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.25

resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ layer_height = 0.15
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg

@@ -22,7 +22,6 @@ layer_height = 0.06
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg

@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40

resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 5
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -22,7 +22,7 @@ layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -22,7 +22,7 @@ layer_height = 0.15
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -21,7 +21,7 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True

resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True

resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg

@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True

resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 0
 prime_tower_enable = False

resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False

resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -19,7 +19,7 @@ infill_sparse_density = 15
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -19,7 +19,7 @@ infill_sparse_density = 15
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 multiple_mesh_overlap = 0.2

resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg

@@ -13,6 +13,4 @@ weight = 0
 
 [values]
 infill_overlap = =0 if infill_sparse_density > 80 else 15
-material_final_print_temperature = =material_print_temperature - 5
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
-

resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = 190
 retraction_hop = 0.2
@@ -29,4 +28,3 @@ top_bottom_thickness = 0.72
 travel_avoid_distance = 0.4
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-

resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -14,6 +14,7 @@ weight = 0
 
 [values]
 brim_width = 10
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
@@ -40,4 +41,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 skin_overlap = 5
@@ -28,4 +27,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -2
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
@@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -1
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
@@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
@@ -34,4 +33,3 @@ speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 multiple_mesh_overlap = 0
@@ -34,4 +33,3 @@ speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 retraction_prime_speed = =retraction_speed
@@ -23,4 +22,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 retraction_prime_speed = =retraction_speed
@@ -22,4 +21,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg

@@ -15,7 +15,6 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
@@ -23,4 +22,3 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -15,11 +15,9 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40
@@ -22,4 +21,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40
@@ -22,4 +21,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
@@ -21,4 +20,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
@@ -21,4 +20,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg

@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
@@ -41,4 +40,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg

@@ -19,7 +19,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
@@ -40,4 +39,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg

@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
 multiple_mesh_overlap = 0
@@ -41,4 +40,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg

@@ -19,7 +19,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
@@ -39,4 +38,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_final_print_temperature = =material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 5
 skin_overlap = 20
@@ -22,4 +21,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature
 speed_infill = =math.ceil(speed_print * 50 / 60)
@@ -21,4 +20,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg

@@ -15,11 +15,9 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 10
 speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -15,11 +15,9 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -2
 
 [values]
 brim_width = 20
+cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -40,4 +41,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -1
 
 [values]
 brim_width = 20
+cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -41,4 +42,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -13,6 +13,7 @@ weight = 0
 
 [values]
 brim_width = 20
+cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -41,4 +42,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -2
 
 [values]
 brim_width = 8.75
+cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -21,7 +22,7 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
@@ -44,4 +45,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -1
 
 [values]
 brim_width = 8.75
+cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -21,7 +22,7 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
@@ -44,4 +45,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -13,6 +13,7 @@ weight = 0
 
 [values]
 brim_width = 8.75
+cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -21,7 +22,7 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 multiple_mesh_overlap = 0
@@ -43,4 +44,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -2
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
@@ -26,4 +25,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -4
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
@@ -27,4 +26,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -3
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
@@ -26,4 +25,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -2
 
 [values]
 brim_width = 25
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
@@ -31,4 +32,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 top_skin_expand_distance = =line_width * 2
 wall_0_wipe_dist = =line_width * 2
-

resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -4
 
 [values]
 brim_width = 25
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
@@ -32,4 +33,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 top_skin_expand_distance = =line_width * 2
 wall_0_wipe_dist = =line_width * 2
-

resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -13,6 +13,7 @@ weight = -3
 
 [values]
 brim_width = 25
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
@@ -30,4 +31,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 top_skin_expand_distance = =line_width * 2
 wall_0_wipe_dist = =line_width * 2
-

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 0
 prime_tower_enable = False
@@ -26,4 +25,3 @@ speed_wall = =round(speed_print * 40 / 45)
 speed_wall_0 = =round(speed_print * 35 / 45)
 support_angle = 70
 top_bottom_thickness = =layer_height * 6
-

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
@@ -27,4 +26,3 @@ speed_wall = =math.ceil(speed_print * 25 / 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg

@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
@@ -27,4 +26,3 @@ speed_wall = =math.ceil(speed_print * 25 / 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -13,10 +13,11 @@ weight = -2
 
 [values]
 brim_width = 8.75
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2
@@ -41,4 +42,3 @@ top_bottom_thickness = 1.2
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -13,11 +13,12 @@ weight = -4
 
 [values]
 brim_width = 8.75
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
@@ -43,4 +44,3 @@ top_bottom_thickness = 1.2
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -13,11 +13,12 @@ weight = -3
 
 [values]
 brim_width = 8.75
+cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 multiple_mesh_overlap = 0.2
@@ -41,4 +42,3 @@ top_bottom_thickness = 1.2
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-

resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
@@ -28,4 +27,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg

@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
@@ -28,4 +27,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
@@ -28,4 +27,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg

@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
@@ -28,4 +27,3 @@ speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_wall_x = =speed_wall
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
-

resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg

@@ -13,6 +13,4 @@ weight = 0
 
 [values]
 infill_overlap = =0 if infill_sparse_density > 80 else 15
-material_final_print_temperature = =material_print_temperature - 5
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
-

resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = 190
 retraction_hop = 0.2
@@ -29,4 +28,3 @@ top_bottom_thickness = 0.72
 travel_avoid_distance = 0.4
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-

resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 skin_overlap = 5
@@ -28,4 +27,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -2
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
@@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -15,7 +15,6 @@ weight = -1
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
@@ -32,4 +31,3 @@ speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
@@ -34,4 +33,3 @@ speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 multiple_mesh_overlap = 0
@@ -34,4 +33,3 @@ speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
 support_z_distance = =layer_height
 wall_0_inset = 0
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 retraction_prime_speed = =retraction_speed
@@ -23,4 +22,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg

@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 retraction_prime_speed = =retraction_speed
@@ -22,4 +21,3 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg

@@ -15,7 +15,6 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
@@ -23,4 +22,3 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -15,11 +15,9 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
-

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40
@@ -22,4 +21,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40
@@ -22,4 +21,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
@@ -21,4 +20,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
@@ -21,4 +20,3 @@ skin_overlap = 50
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-