CURA-5334 corrected extruders that didn't have a material_diameter yet

resources/definitions/imade3d_jellybox.def.json

@@ -15,8 +15,7 @@
         "has_variants": true,
         "has_machine_materials": true,
         "has_machine_quality": true,
-        "machine_extruder_trains":
+        "machine_extruder_trains": {
-        {
             "0": "imade3d_jellybox_extruder_0"
         }
       },

resources/extruders/builder_premium_large_front.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 		
 	    "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/builder_premium_large_rear.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/builder_premium_medium_front.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 		
 	    "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/builder_premium_medium_rear.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/builder_premium_small_front.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 		
 	    "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/builder_premium_small_rear.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/cartesio_extruder_0.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {
           "default_value": "\n;start T0\n\nM104 T0 S{material_print_temperature_layer_0}\nG1 X65 Y35 F9000 ; go to wipe position\nM109 T0 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X45 Y15 F3000; wipe\nG1 X55 F9000\nG1 Y35 F6000; wipe again\n\nM117 printing...\n"         
         },

resources/extruders/cartesio_extruder_1.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 24.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {
           "default_value": "\n;start T1\n\nM104 T1 S{material_print_temperature_layer_0}\nG1 X41 Y35 F9000 ; go to wipe position\nM109 T1 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X21 Y15 F3000; wipe\nG1 X34 F9000\nG1 Y35 F6000; wipe again\n\nM117 printing...\n"         
         },

resources/extruders/cartesio_extruder_2.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 24.0 },
         "machine_nozzle_offset_y": { "default_value": -100.0 },
+        "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {
           "default_value": "\n;start T2\n\nM104 T2 S{material_print_temperature_layer_0}\nG1 X41 Y215 F9000 ; go to wipe position\nM109 T2 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X21 Y235 F3000; wipe\nG1 X31 F9000\nG1 Y215 F6000; wipe again\n\nM117 printing...\n"         
         },

resources/extruders/cartesio_extruder_3.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": -100.0 },
+        "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {
           "default_value": "\n;start T3\n\nM104 T3 S{material_print_temperature_layer_0}\nG1 X65 Y215 F9000 ; go to wipe position\nM109 T3 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X45 Y235 F3000; wipe\nG1 X55 F9000\nG1 Y215 F6000; wipe again\n\nM117 printing...\n"         
         },

resources/extruders/felixtec4_dual_extruder_0.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/felixtec4_dual_extruder_1.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 13 },
         "machine_nozzle_offset_y": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/gmax15plus_dual_extruder_0.def.json

@@ -16,6 +16,7 @@
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
 		"machine_nozzle_size": { "default_value": 0.5 },
+        "material_diameter": { "default_value": 1.75 },
 		
 		"machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": 40 },

resources/extruders/gmax15plus_dual_extruder_1.def.json

@@ -16,6 +16,7 @@
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
 		"machine_nozzle_size": { "default_value": 0.5 },
+        "material_diameter": { "default_value": 1.75 },
 		
 		"machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": 40 },

resources/extruders/hBp_extruder_left.def.json

@@ -15,7 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-
+        "material_diameter": { "default_value": 1.75 },
         
         "extruder_prime_pos_x": { "default_value": 0 },
         "extruder_prime_pos_y": { "default_value": 0 },

resources/extruders/hBp_extruder_right.def.json

@@ -15,7 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-
+        "material_diameter": { "default_value": 1.75 },
         
         "extruder_prime_pos_x": { "default_value": 185 },
         "extruder_prime_pos_y": { "default_value": 0 },

resources/extruders/makeit_dual_1st.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/makeit_dual_2nd.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/makeit_l_dual_2nd.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/ord_extruder_1.def.json

@@ -14,6 +14,7 @@
             "maximum_value": "4"
         },
         "machine_nozzle_offset_x": { "default_value": 62.95 },
-        "machine_nozzle_offset_y": { "default_value": 2.05 }
+        "machine_nozzle_offset_y": { "default_value": 2.05 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/extruders/ord_extruder_2.def.json

@@ -14,6 +14,7 @@
             "maximum_value": "4"
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
-        "machine_nozzle_offset_y": { "default_value": 27.7 }
+        "machine_nozzle_offset_y": { "default_value": 27.7 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/extruders/ord_extruder_3.def.json

@@ -14,6 +14,7 @@
             "maximum_value": "4"
         },
         "machine_nozzle_offset_x": { "default_value": 63.18 },
-        "machine_nozzle_offset_y": { "default_value": 28.65 }
+        "machine_nozzle_offset_y": { "default_value": 28.65 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/extruders/ord_extruder_4.def.json

@@ -14,6 +14,7 @@
             "maximum_value": "4"
         },
         "machine_nozzle_offset_x": { "default_value": 31.6 },
-        "machine_nozzle_offset_y": { "default_value": 28.2 }
+        "machine_nozzle_offset_y": { "default_value": 28.2 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/extruders/punchtec_connect_xl_extruder_0.def.json

@@ -14,6 +14,7 @@
             "maximum_value": "1"
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
-        "machine_nozzle_offset_y": { "default_value": 0.0 }
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/extruders/punchtec_connect_xl_extruder_1.def.json

@@ -14,6 +14,7 @@
             "maximum_value": "1"
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
-        "machine_nozzle_offset_y": { "default_value": 0.0 }
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 }
     }
 }

resources/extruders/raise3D_N2_dual_extruder_0.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/raise3D_N2_dual_extruder_1.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 24.8 },
         "machine_nozzle_offset_y": { "default_value": 0.6 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/raise3D_N2_plus_dual_extruder_0.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/raise3D_N2_plus_dual_extruder_1.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 24.8 },
         "machine_nozzle_offset_y": { "default_value": 0.6 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/vertex_k8400_dual_1st.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 23.7 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },

resources/extruders/vertex_k8400_dual_2nd.def.json

@@ -15,6 +15,7 @@
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
 
         "machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": "prime_tower_position_x" },