diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index af781a8cbe..39af8d8363 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -120,6 +120,7 @@
         "material_bed_temperature": { "maximum_value": "115" },
         "material_bed_temperature_layer_0": { "maximum_value": "115" },
         "material_standby_temperature": { "value": "100" },
+        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" },
         "multiple_mesh_overlap": { "value": "0" },
         "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "default_value": true },
@@ -132,6 +133,7 @@
         "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
+        "retraction_combing": { "value": "no_outer_surfaces" },
         "retraction_count_max": { "value": "10" },
         "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
@@ -161,10 +163,8 @@
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_pattern" : {"value":  "zigzag"},
         "top_bottom_thickness": { "value": "1" },
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" },
-        "wall_material_flow": {"value": "90"},
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
-        "retraction_combing": { "value": "no_outer_surfaces" },
+        "wall_material_flow": {"value": "90"},
         "wall_0_inset": { "value": "0" },
         "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" },
         "wall_thickness": { "value": "1" },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 7e85683cac..6e4abcec3b 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -93,6 +93,7 @@
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'lines'" },
         "infill_wipe_dist": { "value": "0" },
+        "initial_layer_line_width_factor": { "value": "120" },
         "jerk_enabled": { "value": "False" },
         "jerk_layer_0": { "value": "jerk_topbottom" },
         "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" },
@@ -107,9 +108,12 @@
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
         "line_width": { "value": "machine_nozzle_size * 0.875" },
         "machine_min_cool_heat_time_window": { "value": "15" },
+        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" },
+        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },
         "multiple_mesh_overlap": { "value": "0" },
+        "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "value": "True" },
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
@@ -123,6 +127,7 @@
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
+        "retraction_combing": { "value": "no_outer_surfaces" },
         "retraction_count_max": { "value": "10" },
         "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
@@ -160,11 +165,6 @@
         "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
         "wall_thickness": { "value": "1" },
         "wall_material_flow": {"value": "90"},
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
-        "optimize_wall_printing_order": { "value": "True" },
-        "retraction_combing": { "value": "no_outer_surfaces" },
-        "initial_layer_line_width_factor": { "value": "120" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
     }
 }
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index 62295f858a..3a48c4d6e3 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -87,6 +87,7 @@
         "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" },
         "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" },
         "brim_width": { "value": "3" },
+        "build_volume_temperature": { "maximum_value": 50 }
         "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
         "cool_fan_speed": { "value": "50" },
         "cool_fan_speed_max": { "value": "100" },
@@ -96,6 +97,7 @@
         "infill_pattern": { "value": "'lines'" },
         "infill_wipe_dist": { "value": "0" },
         "infill_before_walls": { "value": "False" },
+        "initial_layer_line_width_factor": { "value": "120" },
         "jerk_enabled": { "value": "True" },
         "jerk_layer_0": { "value": "jerk_topbottom" },
         "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" },
@@ -112,7 +114,10 @@
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },
+        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" },
+        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "multiple_mesh_overlap": { "value": "0" },
+        "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "value": "True" },
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
@@ -126,6 +131,7 @@
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
+        "retraction_combing": { "value": "no_outer_surfaces" },
         "retraction_count_max": { "value": "10" },
         "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
@@ -163,12 +169,6 @@
         "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
         "wall_thickness": { "value": "1" },
         "wall_material_flow": {"value": "90"},
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
-        "optimize_wall_printing_order": { "value": "True" },
-        "retraction_combing": { "value": "no_outer_surfaces" },
-        "initial_layer_line_width_factor": { "value": "120" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
-        "build_volume_temperature": { "maximum_value": 50 }
     }
 }