From 5ea08ad66eec4eab91c2f75f4c9ea80921b026a0 Mon Sep 17 00:00:00 2001 From: Remco Burema Date: Thu, 24 Mar 2022 17:56:06 +0100 Subject: [PATCH] Revert "Set the default value of the Maximum Extrusion Area Deviation to 50.000um2 and remove the warning levels." This reverts commit 3c4c91947e4eed82babe58550316789ffcde2444. --- resources/definitions/fdmprinter.def.json | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 4fde50693f..d63999b9a5 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6454,8 +6454,10 @@ "description": "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller.", "type": "float", "unit": "μm²", - "default_value": 50000, + "default_value": 2000, "minimum_value": "0", + "minimum_value_warning": "500", + "maximum_value_warning": "50000", "settable_per_mesh": true } }