From 5f5e758490236f96def18702a1d1cd8c8748c5c7 Mon Sep 17 00:00:00 2001 From: jspijker Date: Fri, 30 Dec 2022 23:35:37 +0100 Subject: [PATCH] Applied printer-linter formatting Contributes to CURA-10101 --- resources/definitions/blocks_mkii.def.json | 52 +++++-------- resources/definitions/blocks_one.def.json | 52 +++++-------- resources/definitions/blocks_pros100.def.json | 55 ++++++------- resources/definitions/blocks_pros30.def.json | 52 +++++-------- resources/definitions/blocks_r21.def.json | 67 +++++++--------- resources/definitions/blocks_rd50.def.json | 77 ++++++++----------- .../definitions/blocks_rd50duplicate.def.json | 77 ++++++++----------- .../definitions/blocks_rd50mirror.def.json | 77 ++++++++----------- resources/definitions/blocks_zero.def.json | 55 ++++++------- .../blocks_pros100_extruder_0.def.json | 29 +++---- .../Nozzle/blocks_global_0.20_draft.inst.cfg | 33 ++++---- .../blocks_global_0.20_standard.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.30_draft.inst.cfg | 33 ++++---- .../blocks_global_0.30_standard.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.30_ultra.inst.cfg | 33 ++++---- .../blocks_global_0.40_adaptive.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_0.40_draft.inst.cfg | 33 ++++---- .../blocks_global_0.40_standard.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.40_ultra.inst.cfg | 33 ++++---- .../blocks_global_0.50_adaptive.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_0.50_draft.inst.cfg | 33 ++++---- .../blocks_global_0.50_standard.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.50_ultra.inst.cfg | 33 ++++---- .../blocks_global_0.60_adaptive.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_0.60_draft.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.60_low.inst.cfg | 33 ++++---- .../blocks_global_0.60_standard.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.60_ultra.inst.cfg | 33 ++++---- .../blocks_global_0.80_adaptive.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_0.80_draft.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.80_low.inst.cfg | 33 ++++---- .../blocks_global_0.80_standard.inst.cfg | 33 ++++---- .../blocks_global_0.80_superlow.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_0.80_ultra.inst.cfg | 33 ++++---- .../blocks_global_1.0_adaptive.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_1.0_draft.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_1.0_low.inst.cfg | 33 ++++---- .../blocks_global_1.0_standard.inst.cfg | 33 ++++---- .../blocks_global_1.0_superlow.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_1.0_ultra.inst.cfg | 33 ++++---- .../blocks_global_1.2_adaptive.inst.cfg | 35 +++++---- .../Nozzle/blocks_global_1.2_draft.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_1.2_low.inst.cfg | 33 ++++---- .../blocks_global_1.2_standard.inst.cfg | 33 ++++---- .../blocks_global_1.2_superlow.inst.cfg | 33 ++++---- .../Nozzle/blocks_global_1.2_ultra.inst.cfg | 33 ++++---- .../blocks_global_ht_0.40_adaptive.inst.cfg | 35 +++++---- .../HT/blocks_global_ht_0.40_draft.inst.cfg | 33 ++++---- .../blocks_global_ht_0.40_standard.inst.cfg | 33 ++++---- .../HT/blocks_global_ht_0.40_ultra.inst.cfg | 33 ++++---- .../blocks_global_ht_0.50_adaptive.inst.cfg | 35 +++++---- .../HT/blocks_global_ht_0.50_draft.inst.cfg | 33 ++++---- .../blocks_global_ht_0.50_standard.inst.cfg | 33 ++++---- .../HT/blocks_global_ht_0.50_ultra.inst.cfg | 33 ++++---- .../blocks_global_ht_0.60_adaptive.inst.cfg | 35 +++++---- .../HT/blocks_global_ht_0.60_draft.inst.cfg | 33 ++++---- .../HT/blocks_global_ht_0.60_low.inst.cfg | 33 ++++---- .../blocks_global_ht_0.60_standard.inst.cfg | 33 ++++---- .../HT/blocks_global_ht_0.60_ultra.inst.cfg | 33 ++++---- .../blocks_global_ht_0.80_adaptive.inst.cfg | 35 +++++---- .../HT/blocks_global_ht_0.80_draft.inst.cfg | 33 ++++---- .../HT/blocks_global_ht_0.80_low.inst.cfg | 33 ++++---- .../blocks_global_ht_0.80_standard.inst.cfg | 33 ++++---- .../blocks_global_ht_0.80_superlow.inst.cfg | 33 ++++---- .../HT/blocks_global_ht_0.80_ultra.inst.cfg | 33 ++++---- .../blocks_global_st_0.20_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_0.20_ultra.inst.cfg | 33 ++++---- .../blocks_global_st_0.30_adaptive.inst.cfg | 35 +++++---- .../blocks_global_st_0.30_standard.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.30_ultra.inst.cfg | 33 ++++---- .../blocks_global_st_0.40_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_0.40_draft.inst.cfg | 33 ++++---- .../blocks_global_st_0.40_standard.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.40_ultra.inst.cfg | 33 ++++---- .../blocks_global_st_0.50_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_0.50_draft.inst.cfg | 33 ++++---- .../blocks_global_st_0.50_standard.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.50_ultra.inst.cfg | 33 ++++---- .../blocks_global_st_0.60_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_0.60_draft.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.60_low.inst.cfg | 33 ++++---- .../blocks_global_st_0.60_standard.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.60_ultra.inst.cfg | 33 ++++---- .../blocks_global_st_0.80_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_0.80_draft.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.80_low.inst.cfg | 33 ++++---- .../blocks_global_st_0.80_standard.inst.cfg | 33 ++++---- .../blocks_global_st_0.80_superlow.inst.cfg | 33 ++++---- .../ST/blocks_global_st_0.80_ultra.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.0_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_1.0_draft.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.0_low.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.0_standard.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.0_superlow.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.0_ultra.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.2_adaptive.inst.cfg | 35 +++++---- .../ST/blocks_global_st_1.2_draft.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.2_low.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.2_standard.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.2_superlow.inst.cfg | 33 ++++---- .../ST/blocks_global_st_1.2_ultra.inst.cfg | 33 ++++---- .../variants/blocks/blocks_mkii_0.20.inst.cfg | 7 +- .../variants/blocks/blocks_mkii_0.30.inst.cfg | 7 +- .../variants/blocks/blocks_mkii_0.40.inst.cfg | 7 +- .../variants/blocks/blocks_mkii_0.50.inst.cfg | 7 +- .../variants/blocks/blocks_mkii_0.60.inst.cfg | 7 +- .../variants/blocks/blocks_mkii_0.80.inst.cfg | 7 +- .../variants/blocks/blocks_one_0.20.inst.cfg | 7 +- .../variants/blocks/blocks_one_0.30.inst.cfg | 7 +- .../variants/blocks/blocks_one_0.40.inst.cfg | 7 +- .../variants/blocks/blocks_one_0.50.inst.cfg | 7 +- .../variants/blocks/blocks_one_0.60.inst.cfg | 7 +- .../variants/blocks/blocks_one_0.80.inst.cfg | 7 +- .../blocks/blocks_pros100_0.40.inst.cfg | 7 +- .../blocks/blocks_pros100_0.50.inst.cfg | 7 +- .../blocks/blocks_pros100_0.60.inst.cfg | 7 +- .../blocks/blocks_pros100_0.80.inst.cfg | 7 +- .../blocks/blocks_pros100_1.0.inst.cfg | 7 +- .../blocks/blocks_pros100_1.2.inst.cfg | 7 +- .../blocks/blocks_pros30_0.40.inst.cfg | 7 +- .../blocks/blocks_pros30_0.50.inst.cfg | 7 +- .../blocks/blocks_pros30_0.60.inst.cfg | 7 +- .../blocks/blocks_pros30_0.80.inst.cfg | 7 +- .../blocks/blocks_pros30_1.0.inst.cfg | 7 +- .../blocks/blocks_pros30_1.2.inst.cfg | 7 +- .../blocks/blocks_r21_ht_0.3.inst.cfg | 7 +- .../blocks/blocks_r21_ht_0.4.inst.cfg | 7 +- .../blocks/blocks_r21_ht_0.5.inst.cfg | 7 +- .../blocks/blocks_r21_ht_0.6.inst.cfg | 8 +- .../blocks/blocks_r21_ht_0.8.inst.cfg | 7 +- .../blocks/blocks_r21_st_0.20.inst.cfg | 7 +- .../blocks/blocks_r21_st_0.30.inst.cfg | 8 +- .../blocks/blocks_r21_st_0.40.inst.cfg | 7 +- .../blocks/blocks_r21_st_0.50.inst.cfg | 7 +- .../blocks/blocks_r21_st_0.60.inst.cfg | 7 +- .../blocks/blocks_r21_st_0.80.inst.cfg | 7 +- .../blocks/blocks_r21_st_1.0.inst.cfg | 7 +- .../blocks/blocks_r21_st_1.2.inst.cfg | 7 +- .../blocks/blocks_rd50_ht_0.3.inst.cfg | 7 +- .../blocks/blocks_rd50_ht_0.4.inst.cfg | 7 +- .../blocks/blocks_rd50_ht_0.5.inst.cfg | 7 +- .../blocks/blocks_rd50_ht_0.6.inst.cfg | 7 +- .../blocks/blocks_rd50_ht_0.8.inst.cfg | 7 +- .../blocks/blocks_rd50_st_0.20.inst.cfg | 7 +- .../blocks/blocks_rd50_st_0.30.inst.cfg | 7 +- .../blocks/blocks_rd50_st_0.40.inst.cfg | 7 +- .../blocks/blocks_rd50_st_0.50.inst.cfg | 7 +- .../blocks/blocks_rd50_st_0.60.inst.cfg | 7 +- .../blocks/blocks_rd50_st_0.80.inst.cfg | 7 +- .../blocks/blocks_rd50_st_1.0.inst.cfg | 7 +- .../blocks/blocks_rd50_st_1.2.inst.cfg | 7 +- .../blocks_rd50duplicate_ht_0.3.inst.cfg | 7 +- .../blocks_rd50duplicate_ht_0.4.inst.cfg | 7 +- .../blocks_rd50duplicate_ht_0.5.inst.cfg | 7 +- .../blocks_rd50duplicate_ht_0.6.inst.cfg | 7 +- .../blocks_rd50duplicate_ht_0.8.inst.cfg | 8 +- .../blocks_rd50duplicate_st_0.20.inst.cfg | 7 +- .../blocks_rd50duplicate_st_0.30.inst.cfg | 7 +- .../blocks_rd50duplicate_st_0.40.inst.cfg | 7 +- .../blocks_rd50duplicate_st_0.50.inst.cfg | 7 +- .../blocks_rd50duplicate_st_0.60.inst.cfg | 7 +- .../blocks_rd50duplicate_st_0.80.inst.cfg | 7 +- .../blocks_rd50duplicate_st_1.0.inst.cfg | 7 +- .../blocks_rd50duplicate_st_1.2.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_ht_0.3.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_ht_0.4.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_ht_0.5.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_ht_0.6.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_ht_0.8.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_0.20.inst.cfg | 8 +- .../blocks/blocks_rd50mirror_st_0.30.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_0.40.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_0.50.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_0.60.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_0.80.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_1.0.inst.cfg | 7 +- .../blocks/blocks_rd50mirror_st_1.2.inst.cfg | 7 +- .../variants/blocks/blocks_zero_0.20.inst.cfg | 7 +- .../variants/blocks/blocks_zero_0.30.inst.cfg | 7 +- .../variants/blocks/blocks_zero_0.40.inst.cfg | 7 +- .../variants/blocks/blocks_zero_0.50.inst.cfg | 7 +- .../variants/blocks/blocks_zero_0.60.inst.cfg | 7 +- .../variants/blocks/blocks_zero_0.80.inst.cfg | 7 +- 183 files changed, 2149 insertions(+), 2063 deletions(-) diff --git a/resources/definitions/blocks_mkii.def.json b/resources/definitions/blocks_mkii.def.json index 76352cc077..631ed35d37 100644 --- a/resources/definitions/blocks_mkii.def.json +++ b/resources/definitions/blocks_mkii.def.json @@ -1,32 +1,22 @@ -{ - "name": "Blocks One MKII", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - - "quality_definition": "blocks_base", - - "platform": "blocks_mk2_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_mkii_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks One MKII" }, - - "machine_width": { "default_value": 200 }, - "machine_height": { "default_value": 210 }, - "machine_depth": { "default_value": 210 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks One MKII", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_mk2_platform.stl", + "machine_extruder_trains": { "0": "blocks_mkii_extruder_0" }, + "quality_definition": "blocks_base" + }, + "overrides": + { + "machine_depth": { "default_value": 210 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_height": { "default_value": 210 }, + "machine_name": { "default_value": "Blocks One MKII" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" }, + "machine_width": { "default_value": 200 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_one.def.json b/resources/definitions/blocks_one.def.json index 064aba4140..e107fde313 100644 --- a/resources/definitions/blocks_one.def.json +++ b/resources/definitions/blocks_one.def.json @@ -1,32 +1,22 @@ -{ - "name": "Blocks One", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - - "quality_definition": "blocks_base", - - "platform": "blocks_mk2_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_one_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks One" }, - - "machine_width": { "default_value": 200 }, - "machine_height": { "default_value": 200 }, - "machine_depth": { "default_value": 200 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F6000\nG92 E0\nG1 F200 E3\nG92 E0\nG1 F6000\nM117 Printing...\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks One", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_mk2_platform.stl", + "machine_extruder_trains": { "0": "blocks_one_extruder_0" }, + "quality_definition": "blocks_base" + }, + "overrides": + { + "machine_depth": { "default_value": 200 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_height": { "default_value": 200 }, + "machine_name": { "default_value": "Blocks One" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F6000\nG92 E0\nG1 F200 E3\nG92 E0\nG1 F6000\nM117 Printing...\n" }, + "machine_width": { "default_value": 200 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_pros100.def.json b/resources/definitions/blocks_pros100.def.json index b829d033e6..a94083624b 100644 --- a/resources/definitions/blocks_pros100.def.json +++ b/resources/definitions/blocks_pros100.def.json @@ -1,34 +1,23 @@ -{ - "name": "Blocks Pro S100", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - - "quality_definition": "blocks_base", - - "preferred_variant_name": "0.8mm Nozzle", - - "platform": "blocks_r100_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_pros100_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks Pro S100" }, - - "machine_width": { "default_value": 1000 }, - "machine_height": { "default_value": 1000 }, - "machine_depth": { "default_value": 1000 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks Pro S100", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_r100_platform.stl", + "machine_extruder_trains": { "0": "blocks_pros100_extruder_0" }, + "preferred_variant_name": "0.8mm Nozzle", + "quality_definition": "blocks_base" + }, + "overrides": + { + "machine_depth": { "default_value": 1000 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_height": { "default_value": 1000 }, + "machine_name": { "default_value": "Blocks Pro S100" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" }, + "machine_width": { "default_value": 1000 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_pros30.def.json b/resources/definitions/blocks_pros30.def.json index b0309f73bd..8d30b8db24 100644 --- a/resources/definitions/blocks_pros30.def.json +++ b/resources/definitions/blocks_pros30.def.json @@ -1,32 +1,22 @@ -{ - "version": 2, - "name": "Blocks Pro S30", - "inherits": "blocks_base", - "metadata": { - "visible": true, - - "quality_definition": "blocks_base", - - "platform": "blocks_pros30_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_pros30_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks Pro S30" }, - - "machine_width": { "default_value": 310 }, - "machine_height": { "default_value": 290 }, - "machine_depth": { "default_value": 310 }, - - "retraction_retract_speed": { "value": 40 }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks Pro S30", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_pros30_platform.stl", + "machine_extruder_trains": { "0": "blocks_pros30_extruder_0" }, + "quality_definition": "blocks_base" + }, + "overrides": + { + "machine_depth": { "default_value": 310 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_height": { "default_value": 290 }, + "machine_name": { "default_value": "Blocks Pro S30" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" }, + "machine_width": { "default_value": 310 }, + "retraction_retract_speed": { "value": 40 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_r21.def.json b/resources/definitions/blocks_r21.def.json index ca7534b0f6..51582bec14 100644 --- a/resources/definitions/blocks_r21.def.json +++ b/resources/definitions/blocks_r21.def.json @@ -1,39 +1,30 @@ -{ - "name": "Blocks R21", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - "first_start_actions": ["MachineSettingsAction"], - "has_materials": true, - "has_variants": true, - "has_machine_quality": true, - "preferred_variant_name": "ST - 0.4mm", - "preferred_quality_type": "normal", - "preferred_material": "generic_pla", - "variants_name": "Print Core", - "quality_definition": "blocks_base", - - "platform": "blocks_r21_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_r21_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks R21" }, - - "machine_width": { "default_value": 300 }, - "machine_height": { "default_value": 250 }, - "machine_depth": { "default_value": 210 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nM117 ; Purge extruder\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000\nG1 X0.1 Y15 F3000.0\nG1 Z0.1 F3000.0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nM117 Printing...\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0;move X/Y to min endstops, so the head is out of the way\nG1 Y210 F5000.0\nG1 Z+70\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks R21", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_r21_platform.stl", + "first_start_actions": [ "MachineSettingsAction" ], + "has_machine_quality": true, + "has_materials": true, + "has_variants": true, + "machine_extruder_trains": { "0": "blocks_r21_extruder_0" }, + "preferred_material": "generic_pla", + "preferred_quality_type": "normal", + "preferred_variant_name": "ST - 0.4mm", + "quality_definition": "blocks_base", + "variants_name": "Print Core" + }, + "overrides": + { + "machine_depth": { "default_value": 210 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0;move X/Y to min endstops, so the head is out of the way\nG1 Y210 F5000.0\nG1 Z+70\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_height": { "default_value": 250 }, + "machine_name": { "default_value": "Blocks R21" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29\nM117 ; Purge extruder\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000\nG1 X0.1 Y15 F3000.0\nG1 Z0.1 F3000.0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nM117 Printing...\n" }, + "machine_width": { "default_value": 300 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_rd50.def.json b/resources/definitions/blocks_rd50.def.json index 3097c8a271..897ec299fe 100644 --- a/resources/definitions/blocks_rd50.def.json +++ b/resources/definitions/blocks_rd50.def.json @@ -1,44 +1,35 @@ -{ - "name": "Blocks RD50", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - "first_start_actions": ["MachineSettingsAction"], - "has_materials": true, - "has_variants": true, - "has_machine_quality": true, - "preferred_variant_name": "ST - 0.4mm", - "preferred_quality_type": "normal", - "preferred_material": "generic_pla", - "variants_name": "Print Core", - "quality_definition": "blocks_base", - - "platform": "blocks_rd50_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_rd50_extruder_0", - "1": "blocks_rd50_extruder_1" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks RD50" }, - - "machine_width": { "default_value": 500 }, - "machine_height": { "default_value": 500 }, - "machine_depth": { "default_value": 500 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_extruder_count": { - "default_value": 2 - }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\n;PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nG1 X-60 Y0 F6000\nG92 E0 ;zero the extruded length\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG1 F600 E20 ;extrude 10mm of feed stock\nG1 F200 E80 ;extrude 10mm of feed stock\nG12\nG92 E0 ;zero the extruded length again\nG29\nG1 Z0.2 F6000\nG1 F6000\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks RD50", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_rd50_platform.stl", + "first_start_actions": [ "MachineSettingsAction" ], + "has_machine_quality": true, + "has_materials": true, + "has_variants": true, + "machine_extruder_trains": + { + "0": "blocks_rd50_extruder_0", + "1": "blocks_rd50_extruder_1" + }, + "preferred_material": "generic_pla", + "preferred_quality_type": "normal", + "preferred_variant_name": "ST - 0.4mm", + "quality_definition": "blocks_base", + "variants_name": "Print Core" + }, + "overrides": + { + "machine_depth": { "default_value": 500 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_extruder_count": { "default_value": 2 }, + "machine_height": { "default_value": 500 }, + "machine_name": { "default_value": "Blocks RD50" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\n;PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nG1 X-60 Y0 F6000\nG92 E0 ;zero the extruded length\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG1 F600 E20 ;extrude 10mm of feed stock\nG1 F200 E80 ;extrude 10mm of feed stock\nG12\nG92 E0 ;zero the extruded length again\nG29\nG1 Z0.2 F6000\nG1 F6000\n" }, + "machine_width": { "default_value": 500 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_rd50duplicate.def.json b/resources/definitions/blocks_rd50duplicate.def.json index 6da9bcf543..47af8572e9 100644 --- a/resources/definitions/blocks_rd50duplicate.def.json +++ b/resources/definitions/blocks_rd50duplicate.def.json @@ -1,44 +1,35 @@ -{ - "name": "Blocks RD50 - Duplication Mode", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - "first_start_actions": ["MachineSettingsAction"], - "has_materials": true, - "has_variants": true, - "has_machine_quality": true, - "preferred_variant_name": "ST - 0.4mm", - "preferred_quality_type": "normal", - "preferred_material": "generic_pla", - "variants_name": "Print Core", - "quality_definition": "blocks_base", - - "platform": "blocks_rd50_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_rd50_extruder_0", - "1": "blocks_rd50_extruder_1" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks RD50 - Duplication Mode" }, - - "machine_width": { "default_value": 500 }, - "machine_height": { "default_value": 500 }, - "machine_depth": { "default_value": 500 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_extruder_count": { - "default_value": 2 - }, - - "machine_start_gcode": { - "default_value": ";INITIALIZE DUPLICATION MODE\nM605 S1 ; AUTO-PARK MODE\nT0 ; Set tool 0\nG28 ; Home all axes\nG28 X\nM605 S2 ; Set duplication mode\n; PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\n;SET DUPLICATION MODE\nM605 S2 X622 ; Set duplication mode and nozzle offset\nG28 X\nG1 X-60 F3000\nM605 S3 X622 ; Set mirror mode and nozzle offset\nM82\nG92 E0 ; Reset Extruder\nG1 F400\nG1 E40 F400 ; Prime\nG12 ; Clean Nozzle\nM605 S2 X250\nG28 X\nG92 E0 ; Reset Extruder\nG1 X0 F3000\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nM605 S1 ; AUTO-PARK MODE\nG28 X Y ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks RD50 - Duplication Mode", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_rd50_platform.stl", + "first_start_actions": [ "MachineSettingsAction" ], + "has_machine_quality": true, + "has_materials": true, + "has_variants": true, + "machine_extruder_trains": + { + "0": "blocks_rd50_extruder_0", + "1": "blocks_rd50_extruder_1" + }, + "preferred_material": "generic_pla", + "preferred_quality_type": "normal", + "preferred_variant_name": "ST - 0.4mm", + "quality_definition": "blocks_base", + "variants_name": "Print Core" + }, + "overrides": + { + "machine_depth": { "default_value": 500 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nM605 S1 ; AUTO-PARK MODE\nG28 X Y ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_extruder_count": { "default_value": 2 }, + "machine_height": { "default_value": 500 }, + "machine_name": { "default_value": "Blocks RD50 - Duplication Mode" }, + "machine_start_gcode": { "default_value": ";INITIALIZE DUPLICATION MODE\nM605 S1 ; AUTO-PARK MODE\nT0 ; Set tool 0\nG28 ; Home all axes\nG28 X\nM605 S2 ; Set duplication mode\n; PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\n;SET DUPLICATION MODE\nM605 S2 X622 ; Set duplication mode and nozzle offset\nG28 X\nG1 X-60 F3000\nM605 S3 X622 ; Set mirror mode and nozzle offset\nM82\nG92 E0 ; Reset Extruder\nG1 F400\nG1 E40 F400 ; Prime\nG12 ; Clean Nozzle\nM605 S2 X250\nG28 X\nG92 E0 ; Reset Extruder\nG1 X0 F3000\n" }, + "machine_width": { "default_value": 500 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_rd50mirror.def.json b/resources/definitions/blocks_rd50mirror.def.json index cc6f9d5a5f..ad077119ad 100644 --- a/resources/definitions/blocks_rd50mirror.def.json +++ b/resources/definitions/blocks_rd50mirror.def.json @@ -1,44 +1,35 @@ -{ - "name": "Blocks RD50 - Mirror Mode", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - "first_start_actions": ["MachineSettingsAction"], - "has_materials": true, - "has_variants": true, - "has_machine_quality": true, - "preferred_variant_name": "ST - 0.4mm", - "preferred_quality_type": "normal", - "preferred_material": "generic_pla", - "variants_name": "Print Core", - "quality_definition": "blocks_base", - - "platform": "blocks_rd50_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_rd50_extruder_0", - "1": "blocks_rd50_extruder_1" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks RD50 - Mirror Mode" }, - - "machine_width": { "default_value": 500 }, - "machine_height": { "default_value": 500 }, - "machine_depth": { "default_value": 500 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_extruder_count": { - "default_value": 2 - }, - - "machine_start_gcode": { - "default_value": ";INITIALIZE MIRROR MODE\nM605 S1 ; AUTO-PARK MODE\nT0 ; Set tool 0\nG28 ; Home all axes\nG28 X ; Home x axes\nM605 S2 ; Set duplication mode\n; PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\n;SET MIRROR MODE\nM605 S2 X622 ; Set duplication mode and nozzle offset\nG28 X\nG1 X-60 F3000\nM605 S3 X622 ; Set mirror mode and nozzle offset\nM82\nG92 E0 ; Reset Extruder\nG1 F200\nG1 E30 F200 ; Prime\nG12 ; Clean Nozzle\nG1 X125 F3000\nG92 E0 ; Reset Extruder\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nM605 S1 ; AUTO-PARK MODE\nG28 X Y ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks RD50 - Mirror Mode", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_rd50_platform.stl", + "first_start_actions": [ "MachineSettingsAction" ], + "has_machine_quality": true, + "has_materials": true, + "has_variants": true, + "machine_extruder_trains": + { + "0": "blocks_rd50_extruder_0", + "1": "blocks_rd50_extruder_1" + }, + "preferred_material": "generic_pla", + "preferred_quality_type": "normal", + "preferred_variant_name": "ST - 0.4mm", + "quality_definition": "blocks_base", + "variants_name": "Print Core" + }, + "overrides": + { + "machine_depth": { "default_value": 500 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nM605 S1 ; AUTO-PARK MODE\nG28 X Y ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_extruder_count": { "default_value": 2 }, + "machine_height": { "default_value": 500 }, + "machine_name": { "default_value": "Blocks RD50 - Mirror Mode" }, + "machine_start_gcode": { "default_value": ";INITIALIZE MIRROR MODE\nM605 S1 ; AUTO-PARK MODE\nT0 ; Set tool 0\nG28 ; Home all axes\nG28 X ; Home x axes\nM605 S2 ; Set duplication mode\n; PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\n;SET MIRROR MODE\nM605 S2 X622 ; Set duplication mode and nozzle offset\nG28 X\nG1 X-60 F3000\nM605 S3 X622 ; Set mirror mode and nozzle offset\nM82\nG92 E0 ; Reset Extruder\nG1 F200\nG1 E30 F200 ; Prime\nG12 ; Clean Nozzle\nG1 X125 F3000\nG92 E0 ; Reset Extruder\n" }, + "machine_width": { "default_value": 500 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/definitions/blocks_zero.def.json b/resources/definitions/blocks_zero.def.json index 9ac0314f50..d0ed827e5e 100644 --- a/resources/definitions/blocks_zero.def.json +++ b/resources/definitions/blocks_zero.def.json @@ -1,34 +1,23 @@ -{ - "name": "Blocks Zero", - "version": 2, - "inherits": "blocks_base", - "metadata": { - "visible": true, - - "quality_definition": "blocks_base", - - "platform": "blocks_zero_platform.stl", - - "machine_extruder_trains": { - "0": "blocks_zero_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Blocks Zero" }, - - "machine_heated_bed": { "default_value": false }, - - "machine_width": { "default_value": 120 }, - "machine_height": { "default_value": 120 }, - "machine_depth": { "default_value": 140 }, - - "retraction_retract_speed": { "value": 50 }, - - "machine_start_gcode": { - "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" - }, - "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" - } - } +{ + "version": 2, + "name": "Blocks Zero", + "inherits": "blocks_base", + "metadata": + { + "visible": true, + "platform": "blocks_zero_platform.stl", + "machine_extruder_trains": { "0": "blocks_zero_extruder_0" }, + "quality_definition": "blocks_base" + }, + "overrides": + { + "machine_depth": { "default_value": 140 }, + "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" }, + "machine_heated_bed": { "default_value": false }, + "machine_height": { "default_value": 120 }, + "machine_name": { "default_value": "Blocks Zero" }, + "machine_start_gcode": { "default_value": "G21\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 X-14 Y0 F6000\nG1 Z0.1\nG92 E0 ;zero the extruded length\nG1 F2000 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z0.2 F6000\nG1 F6000\nM117 Printing...\n" }, + "machine_width": { "default_value": 120 }, + "retraction_retract_speed": { "value": 50 } + } } \ No newline at end of file diff --git a/resources/extruders/blocks_pros100_extruder_0.def.json b/resources/extruders/blocks_pros100_extruder_0.def.json index 84b39435a1..fa7392fd40 100644 --- a/resources/extruders/blocks_pros100_extruder_0.def.json +++ b/resources/extruders/blocks_pros100_extruder_0.def.json @@ -1,15 +1,16 @@ -{ - "version": 2, - "name": "Extruder 1", - "inherits": "fdmextruder", - "metadata": { - "machine": "blocks_pros100", - "position": "0" - }, - - "overrides": { - "extruder_nr": { "default_value": 0 }, - "machine_nozzle_size": { "default_value": 0.8 }, - "material_diameter": { "default_value": 1.75 } - } +{ + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": + { + "machine": "blocks_pros100", + "position": "0" + }, + "overrides": + { + "extruder_nr": { "default_value": 0 }, + "machine_nozzle_size": { "default_value": 0.8 }, + "material_diameter": { "default_value": 1.75 } + } } \ No newline at end of file diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg index 97f07b5cc1..4f1cbd301b 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.20_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low 0.2 -weight = -5 -global_quality = True -variant = 0.2mm Nozzle - -[values] -layer_height = 0.15 -layer_height_0 = 0.15 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low 0.2 +setting_version = 20 +type = quality +variant = 0.2mm Nozzle +weight = -5 + +[values] +layer_height = 0.15 +layer_height_0 = 0.15 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg index 6a1ee62a6e..7b5adec7ce 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.20_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal 0.2 -weight = -3 -global_quality = True -variant = 0.2mm Nozzle - -[values] -layer_height = 0.1 -layer_height_0 = 0.15 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal 0.2 +setting_version = 20 +type = quality +variant = 0.2mm Nozzle +weight = -3 + +[values] +layer_height = 0.1 +layer_height_0 = 0.15 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg index 52e1e306dc..863e33e388 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.30_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 0.3mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 0.3mm Nozzle +weight = -5 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg index 707d1bd2a4..dfd31ed136 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.30_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal 0.3 -weight = -3 -global_quality = True -variant = 0.3mm Nozzle - -[values] -layer_height = 0.16 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal 0.3 +setting_version = 20 +type = quality +variant = 0.3mm Nozzle +weight = -3 + +[values] +layer_height = 0.16 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg index 8313bba9f0..a65fe2774b 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.30_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 0.3mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 0.3mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg index b8d367f01f..c531bb3a86 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = 0.4mm Nozzle - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = 0.4mm Nozzle +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg index 66a9987380..73dd1b42f9 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 0.4mm Nozzle - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 0.4mm Nozzle +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg index 3cb30d3bbf..2320efea9c 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = 0.4mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = 0.4mm Nozzle +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg index bc71a780d4..b3fb23451a 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.40_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 0.4mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 0.4mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg index 78a850f41d..4e23c50596 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = 0.5mm Nozzle - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = 0.5mm Nozzle +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg index bb60d0175e..da912df79c 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 0.5mm Nozzle - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 0.5mm Nozzle +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg index b3879eca66..584e8c0681 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = 0.5mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = 0.5mm Nozzle +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg index c4efa17501..1e8ea6146d 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.50_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 0.5mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 0.5mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg index f766505a40..74ed467aff 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = 0.6mm Nozzle - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = 0.6mm Nozzle +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg index cd32f43079..438333b157 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 0.6mm Nozzle - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 0.6mm Nozzle +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg index 8583789cf2..82e07657b0 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = -5 -global_quality = True -variant = 0.6mm Nozzle - -[values] -layer_height = 0.40 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = 0.6mm Nozzle +weight = -5 + +[values] +layer_height = 0.40 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg index 5fed2ec15a..f115542e9b 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = 0.6mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = 0.6mm Nozzle +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg index ac38851cb7..1aad590e7a 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.60_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 0.6mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 0.6mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg index 4356a0cf3f..8c84d3de77 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = 0.8mm Nozzle - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = 0.8mm Nozzle +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg index 5241c1d658..b4e5108e3a 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 0.8mm Nozzle - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 0.8mm Nozzle +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg index 1fb8829b21..55a7aeb751 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = -5 -global_quality = True -variant = 0.8mm Nozzle - -[values] -layer_height = 0.50 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Super low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = 0.8mm Nozzle +weight = -5 + +[values] +layer_height = 0.50 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg index 71f340c3a2..ca5a3a6228 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = 0.8mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = 0.8mm Nozzle +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg index 9fe72b5588..3daebb5631 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_superlow.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = -5 -global_quality = True -variant = 0.8mm Nozzle - -[values] -layer_height = 0.50 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Super low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = 0.8mm Nozzle +weight = -5 + +[values] +layer_height = 0.50 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg index 1e434d9394..6776d8908c 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_0.80_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 0.8mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 0.8mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg index b92d0e38c0..660d1d9091 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = 1.0mm Nozzle - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = 1.0mm Nozzle +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg index 2c7058455b..b44aa16b5c 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_draft.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 1.0mm Nozzle - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 -speed_infill = =speed_print \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 1.0mm Nozzle +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 +speed_infill = =speed_print + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg index 5a8dc27277..e726f39e91 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = -5 -global_quality = True -variant = 1.0mm Nozzle - -[values] -layer_height = 0.40 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = 1.0mm Nozzle +weight = -5 + +[values] +layer_height = 0.40 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg index 5af0a2c444..8fc1b41ab7 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = 1.0mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = 1.0mm Nozzle +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg index 19e0ec79d5..08c46f984e 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_superlow.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = -5 -global_quality = True -variant = 1.0mm Nozzle - -[values] -layer_height = 0.50 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Super low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = 1.0mm Nozzle +weight = -5 + +[values] +layer_height = 0.50 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg index de1bb925cc..e5d1ae3853 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.0_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 1.0mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 1.0mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg index 7a0795715d..2adb850a30 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = 1.2mm Nozzle - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = 1.2mm Nozzle +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg index f9a0a99a05..0c58998b28 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = 1.2mm Nozzle - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = 1.2mm Nozzle +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg index 17594f481b..87df5e6116 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = -5 -global_quality = True -variant = 1.2mm Nozzle - -[values] -layer_height = 0.40 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = 1.2mm Nozzle +weight = -5 + +[values] +layer_height = 0.40 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg index efd5125177..f0de0c78eb 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = 1.2mm Nozzle - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = 1.2mm Nozzle +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg index 51dc767773..48f1e02bf9 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_superlow.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = -5 -global_quality = True -variant = 1.2mm Nozzle - -[values] -layer_height = 0.50 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Super low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = 1.2mm Nozzle +weight = -5 + +[values] +layer_height = 0.50 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg b/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg index db28c0afa8..1d48b168e0 100644 --- a/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg +++ b/resources/quality/blocks/Nozzle/blocks_global_1.2_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = 1.2mm Nozzle - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = 1.2mm Nozzle +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg index 7b1397aa18..518e773ed5 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = HT - 0.4mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = HT - 0.4mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg index 75ebffd18a..710519cea2 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = HT - 0.4mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = HT - 0.4mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg index 7d37809b25..623c063b8e 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = HT - 0.4mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = HT - 0.4mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg index 846a5e0f30..5e20cf4054 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.40_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = HT - 0.4mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = HT - 0.4mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg index 1a24116240..14c2723fc6 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = HT - 0.5mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = HT - 0.5mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg index ca9423e2cf..9f99c8c10f 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = HT - 0.5mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = HT - 0.5mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg index d9e275211d..0eaf385a7c 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = HT - 0.5mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = HT - 0.5mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg index 378daf6c83..7c58392565 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.50_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = HT - 0.5mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = HT - 0.5mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg index 4d66b30e8b..65c779ad43 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = HT - 0.6mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = HT - 0.6mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg index 1353947615..cc8da09310 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = HT - 0.6mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = HT - 0.6mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg index 82c922a4a2..198aa49190 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = 0 -global_quality = True -variant = HT - 0.6mm - -[values] -layer_height = 0.4 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = HT - 0.6mm +weight = 0 + +[values] +layer_height = 0.4 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg index 4fb4459392..5285689301 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = HT - 0.6mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = HT - 0.6mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg index 645ad4f9da..162c2643fc 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.60_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = HT - 0.6mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = HT - 0.6mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg index 1b8e5aa3ac..f8ca1bb69c 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = HT - 0.8mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = HT - 0.8mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg index 75cf129a94..69a5db75dd 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = HT - 0.8mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = HT - 0.8mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg index 7e9e7e000d..5dc99b475d 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = 0 -global_quality = True -variant = HT - 0.8mm - -[values] -layer_height = 0.4 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = HT - 0.8mm +weight = 0 + +[values] +layer_height = 0.4 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg index 0bad8617fe..7ce40bd851 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = HT - 0.8mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = HT - 0.8mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg index 8bf5183ce8..62b0feefb5 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_superlow.inst.cfg @@ -1,16 +1,17 @@ -H[general] -version = 4 -name = Super Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = 0 -global_quality = True -variant = HT - 0.8mm - -[values] -layer_height = 0.5 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Super Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = HT - 0.8mm +weight = 0 + +[values] +layer_height = 0.5 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg index 51fa310b2a..a1d67e5cec 100644 --- a/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/HT/blocks_global_ht_0.80_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = HT - 0.8mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = HT - 0.8mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg index 85f53f6ea8..632fb0c9c7 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 0.2mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.15 -layer_height_0 = 0.15 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 0.2mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.15 +layer_height_0 = 0.15 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg index fe38a80f21..2e530e79b5 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.20_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 0.2mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.15 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 0.2mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.15 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg index aaa654a90c..6149b1a0ac 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 0.3mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 0.3mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg index f56d745447..25b4dd3530 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 0.3mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 0.3mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg index 505ce19173..7112fcc231 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.30_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 0.3mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 0.3mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg index 0eb1311570..d64b5038d1 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 0.4mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 0.4mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg index 6291d60f74..21eee48d02 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = ST - 0.4mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = ST - 0.4mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg index 77bede0d0f..20c8c80769 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 0.4mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 0.4mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg index a089fa9c08..aa495e9b65 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.40_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 0.4mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 0.4mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg index 8937983638..e8de7c1641 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 0.5mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 0.5mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg index f16f22b036..2ad389aa06 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = ST - 0.5mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = ST - 0.5mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg index 020e3ce67f..b20762c698 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 0.5mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 0.5mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg index 4e013c47e8..b4e83d6bf5 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.50_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 0.5mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 0.5mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg index 15de9cb6a5..92ff61ceac 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 0.6mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 0.6mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg index 36923cac08..a7af19ad2b 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = ST - 0.6mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = ST - 0.6mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg index 50beef192c..2caefe61b4 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = 0 -global_quality = True -variant = ST - 0.6mm - -[values] -layer_height = 0.4 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = ST - 0.6mm +weight = 0 + +[values] +layer_height = 0.4 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg index 907ef5ca48..edaa070d64 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 0.6mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 0.6mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg index 9e8e2414a2..bd6a6c6c40 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.60_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 0.6mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 0.6mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg index 7192391023..c443157a5b 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 0.8mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 0.8mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg index fc1d07fd2a..b307bd22bd 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = ST - 0.8mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = ST - 0.8mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg index 581f63580c..7158c41bfb 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = 0 -global_quality = True -variant = ST - 0.8mm - -[values] -layer_height = 0.4 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = ST - 0.8mm +weight = 0 + +[values] +layer_height = 0.4 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg index 28ca5039df..57a34b6ac1 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 0.8mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 0.8mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg index d5ffe4a869..4eb1bd89b9 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_superlow.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = 0 -global_quality = True -variant = ST - 0.8mm - -[values] -layer_height = 0.5 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Super Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = ST - 0.8mm +weight = 0 + +[values] +layer_height = 0.5 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg index 033a5a991a..c70777bb73 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_0.80_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 0.8mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 0.8mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg index 3bcb84a3b6..88e5f48ee2 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 1.0mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 1.0mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg index 9a1d7adca2..7c63856c9e 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = ST - 1.0mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = ST - 1.0mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg index c9070c0840..ff4b1e6c98 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = 0 -global_quality = True -variant = ST - 1.0mm - -[values] -layer_height = 0.4 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = ST - 1.0mm +weight = 0 + +[values] +layer_height = 0.4 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg index 12203831c3..76eb51dbac 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 1.0mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 1.0mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg index ea1add0e49..c0d9a8069c 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_superlow.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = 0 -global_quality = True -variant = ST - 1.0mm - -[values] -layer_height = 0.5 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Super Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = ST - 1.0mm +weight = 0 + +[values] +layer_height = 0.5 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg index 369b5062c2..90437cda44 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.0_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 1.0mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 1.0mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg index 5a1751635d..1cb7710e8d 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_adaptive.inst.cfg @@ -1,17 +1,18 @@ -[general] -version = 4 -name = Dynamic Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = adaptive -weight = -2 -global_quality = True -variant = ST - 1.2mm - -[values] -adaptive_layer_height_enabled = true -layer_height = 0.16 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Dynamic Quality +version = 4 + +[metadata] +global_quality = True +quality_type = adaptive +setting_version = 20 +type = quality +variant = ST - 1.2mm +weight = -2 + +[values] +adaptive_layer_height_enabled = true +layer_height = 0.16 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg index a08c14570f..74ab2638d8 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_draft.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Draft Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = draft -weight = -5 -global_quality = True -variant = ST - 1.2mm - -[values] -layer_height = 0.30 -layer_height_0 = 0.20 \ No newline at end of file +[general] +definition = blocks_base +name = Draft Quality +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 20 +type = quality +variant = ST - 1.2mm +weight = -5 + +[values] +layer_height = 0.30 +layer_height_0 = 0.20 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg index fa9c39f74c..79c41c1b1d 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_low.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = low -weight = 0 -global_quality = True -variant = ST - 1.2mm - -[values] -layer_height = 0.4 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = low +setting_version = 20 +type = quality +variant = ST - 1.2mm +weight = 0 + +[values] +layer_height = 0.4 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg index 36fbf89260..ceca730b3a 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_standard.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Standard Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = normal -weight = -3 -global_quality = True -variant = ST - 1.2mm - -[values] -layer_height = 0.2 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Standard Quality +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 20 +type = quality +variant = ST - 1.2mm +weight = -3 + +[values] +layer_height = 0.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg index fa3801776a..e4cc9b69d7 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_superlow.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Super Low Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = superlow -weight = 0 -global_quality = True -variant = ST - 1.2mm - -[values] -layer_height = 0.5 -layer_height_0 = 0.2 \ No newline at end of file +[general] +definition = blocks_base +name = Super Low Quality +version = 4 + +[metadata] +global_quality = True +quality_type = superlow +setting_version = 20 +type = quality +variant = ST - 1.2mm +weight = 0 + +[values] +layer_height = 0.5 +layer_height_0 = 0.2 + diff --git a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg index 7d8da30133..3cf71fc5a2 100644 --- a/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg +++ b/resources/quality/blocks/Printcore/ST/blocks_global_st_1.2_ultra.inst.cfg @@ -1,16 +1,17 @@ -[general] -version = 4 -name = Ultra Quality -definition = blocks_base - -[metadata] -setting_version = 20 -type = quality -quality_type = ultra -weight = 0 -global_quality = True -variant = ST - 1.2mm - -[values] -layer_height = 0.10 -layer_height_0 = 0.16 \ No newline at end of file +[general] +definition = blocks_base +name = Ultra Quality +version = 4 + +[metadata] +global_quality = True +quality_type = ultra +setting_version = 20 +type = quality +variant = ST - 1.2mm +weight = 0 + +[values] +layer_height = 0.10 +layer_height_0 = 0.16 + diff --git a/resources/variants/blocks/blocks_mkii_0.20.inst.cfg b/resources/variants/blocks/blocks_mkii_0.20.inst.cfg index 9becfebfc4..ca0eb52c03 100644 --- a/resources/variants/blocks/blocks_mkii_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_mkii_0.20.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_mkii name = 0.2mm Nozzle version = 4 -definition = blocks_mkii [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_mkii_0.30.inst.cfg b/resources/variants/blocks/blocks_mkii_0.30.inst.cfg index 09ff90f32d..362ffc27b8 100644 --- a/resources/variants/blocks/blocks_mkii_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_mkii_0.30.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_mkii name = 0.3mm Nozzle version = 4 -definition = blocks_mkii [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_mkii_0.40.inst.cfg b/resources/variants/blocks/blocks_mkii_0.40.inst.cfg index 0f7dcf2e2f..92ba3f7507 100644 --- a/resources/variants/blocks/blocks_mkii_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_mkii_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_mkii name = 0.4mm Nozzle version = 4 -definition = blocks_mkii [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_mkii_0.50.inst.cfg b/resources/variants/blocks/blocks_mkii_0.50.inst.cfg index 2766013377..a1f11c2032 100644 --- a/resources/variants/blocks/blocks_mkii_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_mkii_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_mkii name = 0.5mm Nozzle version = 4 -definition = blocks_mkii [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_mkii_0.60.inst.cfg b/resources/variants/blocks/blocks_mkii_0.60.inst.cfg index e5dd61bff4..722f3aa144 100644 --- a/resources/variants/blocks/blocks_mkii_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_mkii_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_mkii name = 0.6mm Nozzle version = 4 -definition = blocks_mkii [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_mkii_0.80.inst.cfg b/resources/variants/blocks/blocks_mkii_0.80.inst.cfg index cf78f62bb5..91c5551104 100644 --- a/resources/variants/blocks/blocks_mkii_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_mkii_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_mkii name = 0.8mm Nozzle version = 4 -definition = blocks_mkii [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_one_0.20.inst.cfg b/resources/variants/blocks/blocks_one_0.20.inst.cfg index a7860ab260..ec07082b68 100644 --- a/resources/variants/blocks/blocks_one_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_one_0.20.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_one name = 0.2mm Nozzle version = 4 -definition = blocks_one [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_one_0.30.inst.cfg b/resources/variants/blocks/blocks_one_0.30.inst.cfg index 4e436f1971..af95a7029a 100644 --- a/resources/variants/blocks/blocks_one_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_one_0.30.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_one name = 0.3mm Nozzle version = 4 -definition = blocks_one [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_one_0.40.inst.cfg b/resources/variants/blocks/blocks_one_0.40.inst.cfg index 87965f3362..520e784411 100644 --- a/resources/variants/blocks/blocks_one_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_one_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_one name = 0.4mm Nozzle version = 4 -definition = blocks_one [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_one_0.50.inst.cfg b/resources/variants/blocks/blocks_one_0.50.inst.cfg index 49501ab4fd..10b33b8a24 100644 --- a/resources/variants/blocks/blocks_one_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_one_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_one name = 0.5mm Nozzle version = 4 -definition = blocks_one [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_one_0.60.inst.cfg b/resources/variants/blocks/blocks_one_0.60.inst.cfg index 35e143c487..42c7263146 100644 --- a/resources/variants/blocks/blocks_one_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_one_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_one name = 0.6mm Nozzle version = 4 -definition = blocks_one [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_one_0.80.inst.cfg b/resources/variants/blocks/blocks_one_0.80.inst.cfg index 29324cc838..b360bfd31e 100644 --- a/resources/variants/blocks/blocks_one_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_one_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_one name = 0.8mm Nozzle version = 4 -definition = blocks_one [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_pros100_0.40.inst.cfg b/resources/variants/blocks/blocks_pros100_0.40.inst.cfg index 7fbd45dc60..065dc44f09 100644 --- a/resources/variants/blocks/blocks_pros100_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_pros100_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros100 name = 0.4mm Nozzle version = 4 -definition = blocks_pros100 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_pros100_0.50.inst.cfg b/resources/variants/blocks/blocks_pros100_0.50.inst.cfg index 9e433aa683..9df6397bb9 100644 --- a/resources/variants/blocks/blocks_pros100_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_pros100_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros100 name = 0.5mm Nozzle version = 4 -definition = blocks_pros100 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_pros100_0.60.inst.cfg b/resources/variants/blocks/blocks_pros100_0.60.inst.cfg index de3eb51423..db9a0966f9 100644 --- a/resources/variants/blocks/blocks_pros100_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_pros100_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros100 name = 0.6mm Nozzle version = 4 -definition = blocks_pros100 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_pros100_0.80.inst.cfg b/resources/variants/blocks/blocks_pros100_0.80.inst.cfg index df7e16167a..74d502189a 100644 --- a/resources/variants/blocks/blocks_pros100_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_pros100_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros100 name = 0.8mm Nozzle version = 4 -definition = blocks_pros100 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_pros100_1.0.inst.cfg b/resources/variants/blocks/blocks_pros100_1.0.inst.cfg index 798cc6b5e7..6185766f93 100644 --- a/resources/variants/blocks/blocks_pros100_1.0.inst.cfg +++ b/resources/variants/blocks/blocks_pros100_1.0.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros100 name = 1.0mm Nozzle version = 4 -definition = blocks_pros100 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.0 \ No newline at end of file +machine_nozzle_size = 1.0 + diff --git a/resources/variants/blocks/blocks_pros100_1.2.inst.cfg b/resources/variants/blocks/blocks_pros100_1.2.inst.cfg index fc2ce0e94b..1b37365d67 100644 --- a/resources/variants/blocks/blocks_pros100_1.2.inst.cfg +++ b/resources/variants/blocks/blocks_pros100_1.2.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros100 name = 1.2mm Nozzle version = 4 -definition = blocks_pros100 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.2 \ No newline at end of file +machine_nozzle_size = 1.2 + diff --git a/resources/variants/blocks/blocks_pros30_0.40.inst.cfg b/resources/variants/blocks/blocks_pros30_0.40.inst.cfg index eecc2a759f..3d9606465c 100644 --- a/resources/variants/blocks/blocks_pros30_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_pros30_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros30 name = 0.4mm Nozzle version = 4 -definition = blocks_pros30 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_pros30_0.50.inst.cfg b/resources/variants/blocks/blocks_pros30_0.50.inst.cfg index 3f899cf2aa..b124864195 100644 --- a/resources/variants/blocks/blocks_pros30_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_pros30_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros30 name = 0.5mm Nozzle version = 4 -definition = blocks_pros30 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_pros30_0.60.inst.cfg b/resources/variants/blocks/blocks_pros30_0.60.inst.cfg index 496b1e9987..f705dad66c 100644 --- a/resources/variants/blocks/blocks_pros30_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_pros30_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros30 name = 0.6mm Nozzle version = 4 -definition = blocks_pros30 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_pros30_0.80.inst.cfg b/resources/variants/blocks/blocks_pros30_0.80.inst.cfg index 1d65bda36d..f3e408b614 100644 --- a/resources/variants/blocks/blocks_pros30_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_pros30_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros30 name = 0.8mm Nozzle version = 4 -definition = blocks_pros30 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_pros30_1.0.inst.cfg b/resources/variants/blocks/blocks_pros30_1.0.inst.cfg index 2603b1ad3c..9718a2693a 100644 --- a/resources/variants/blocks/blocks_pros30_1.0.inst.cfg +++ b/resources/variants/blocks/blocks_pros30_1.0.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros30 name = 1.0mm Nozzle version = 4 -definition = blocks_pros30 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.0 \ No newline at end of file +machine_nozzle_size = 1.0 + diff --git a/resources/variants/blocks/blocks_pros30_1.2.inst.cfg b/resources/variants/blocks/blocks_pros30_1.2.inst.cfg index 8134bb5ae6..1b2673301d 100644 --- a/resources/variants/blocks/blocks_pros30_1.2.inst.cfg +++ b/resources/variants/blocks/blocks_pros30_1.2.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_pros30 name = 1.2mm Nozzle version = 4 -definition = blocks_pros30 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.2 \ No newline at end of file +machine_nozzle_size = 1.2 + diff --git a/resources/variants/blocks/blocks_r21_ht_0.3.inst.cfg b/resources/variants/blocks/blocks_r21_ht_0.3.inst.cfg index abf350e616..4756792236 100644 --- a/resources/variants/blocks/blocks_r21_ht_0.3.inst.cfg +++ b/resources/variants/blocks/blocks_r21_ht_0.3.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = HT - 0.3mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_r21_ht_0.4.inst.cfg b/resources/variants/blocks/blocks_r21_ht_0.4.inst.cfg index d2c6dab0f4..3cd60bf11e 100644 --- a/resources/variants/blocks/blocks_r21_ht_0.4.inst.cfg +++ b/resources/variants/blocks/blocks_r21_ht_0.4.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = HT - 0.4mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_r21_ht_0.5.inst.cfg b/resources/variants/blocks/blocks_r21_ht_0.5.inst.cfg index e207bf34cc..1b00bb2a96 100644 --- a/resources/variants/blocks/blocks_r21_ht_0.5.inst.cfg +++ b/resources/variants/blocks/blocks_r21_ht_0.5.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = HT - 0.5mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_r21_ht_0.6.inst.cfg b/resources/variants/blocks/blocks_r21_ht_0.6.inst.cfg index 4c1098721d..aef77f06e0 100644 --- a/resources/variants/blocks/blocks_r21_ht_0.6.inst.cfg +++ b/resources/variants/blocks/blocks_r21_ht_0.6.inst.cfg @@ -1,11 +1,13 @@ [general] +definition = blocks_r21 name = HT - 0.6mm version = 4 -definition = blocks_r21 + [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_r21_ht_0.8.inst.cfg b/resources/variants/blocks/blocks_r21_ht_0.8.inst.cfg index debd34a331..f795d72be9 100644 --- a/resources/variants/blocks/blocks_r21_ht_0.8.inst.cfg +++ b/resources/variants/blocks/blocks_r21_ht_0.8.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = HT - 0.8mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_r21_st_0.20.inst.cfg b/resources/variants/blocks/blocks_r21_st_0.20.inst.cfg index 28e8ce6712..1614ca9d28 100644 --- a/resources/variants/blocks/blocks_r21_st_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_0.20.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 0.2mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_r21_st_0.30.inst.cfg b/resources/variants/blocks/blocks_r21_st_0.30.inst.cfg index 88329313ba..e3e70bf0d1 100644 --- a/resources/variants/blocks/blocks_r21_st_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_0.30.inst.cfg @@ -1,11 +1,13 @@ [general] +definition = blocks_r21 name = ST - 0.3mm version = 4 -definition = blocks_r21 + [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_r21_st_0.40.inst.cfg b/resources/variants/blocks/blocks_r21_st_0.40.inst.cfg index 35c2653d58..66fa5ba0cb 100644 --- a/resources/variants/blocks/blocks_r21_st_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 0.4mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_r21_st_0.50.inst.cfg b/resources/variants/blocks/blocks_r21_st_0.50.inst.cfg index a962a2d60a..209c684982 100644 --- a/resources/variants/blocks/blocks_r21_st_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 0.5mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_r21_st_0.60.inst.cfg b/resources/variants/blocks/blocks_r21_st_0.60.inst.cfg index b4aab1fc42..711af5aa4a 100644 --- a/resources/variants/blocks/blocks_r21_st_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 0.6mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_r21_st_0.80.inst.cfg b/resources/variants/blocks/blocks_r21_st_0.80.inst.cfg index 6809ee4431..f6eceec441 100644 --- a/resources/variants/blocks/blocks_r21_st_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 0.8mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_r21_st_1.0.inst.cfg b/resources/variants/blocks/blocks_r21_st_1.0.inst.cfg index d5f376f937..95460890f6 100644 --- a/resources/variants/blocks/blocks_r21_st_1.0.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_1.0.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 1.0mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.0 \ No newline at end of file +machine_nozzle_size = 1.0 + diff --git a/resources/variants/blocks/blocks_r21_st_1.2.inst.cfg b/resources/variants/blocks/blocks_r21_st_1.2.inst.cfg index b4f11987be..f3488b0b98 100644 --- a/resources/variants/blocks/blocks_r21_st_1.2.inst.cfg +++ b/resources/variants/blocks/blocks_r21_st_1.2.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_r21 name = ST - 1.2mm version = 4 -definition = blocks_r21 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.20 \ No newline at end of file +machine_nozzle_size = 1.20 + diff --git a/resources/variants/blocks/blocks_rd50_ht_0.3.inst.cfg b/resources/variants/blocks/blocks_rd50_ht_0.3.inst.cfg index e9efe5fbc2..939d0d2444 100644 --- a/resources/variants/blocks/blocks_rd50_ht_0.3.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_ht_0.3.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = HT - 0.3mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_rd50_ht_0.4.inst.cfg b/resources/variants/blocks/blocks_rd50_ht_0.4.inst.cfg index 4041b0d881..85687531eb 100644 --- a/resources/variants/blocks/blocks_rd50_ht_0.4.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_ht_0.4.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = HT - 0.4mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_rd50_ht_0.5.inst.cfg b/resources/variants/blocks/blocks_rd50_ht_0.5.inst.cfg index 3e3af33b4c..f0690f613a 100644 --- a/resources/variants/blocks/blocks_rd50_ht_0.5.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_ht_0.5.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = HT - 0.5mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_rd50_ht_0.6.inst.cfg b/resources/variants/blocks/blocks_rd50_ht_0.6.inst.cfg index bfc52c4f99..485086680b 100644 --- a/resources/variants/blocks/blocks_rd50_ht_0.6.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_ht_0.6.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = HT - 0.6mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_rd50_ht_0.8.inst.cfg b/resources/variants/blocks/blocks_rd50_ht_0.8.inst.cfg index 204ce32f91..5242cd5563 100644 --- a/resources/variants/blocks/blocks_rd50_ht_0.8.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_ht_0.8.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = HT - 0.8mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_rd50_st_0.20.inst.cfg b/resources/variants/blocks/blocks_rd50_st_0.20.inst.cfg index 19484b28a6..1e372e964e 100644 --- a/resources/variants/blocks/blocks_rd50_st_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_0.20.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 0.2mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_rd50_st_0.30.inst.cfg b/resources/variants/blocks/blocks_rd50_st_0.30.inst.cfg index 8daaef7dd4..c4ec0a3147 100644 --- a/resources/variants/blocks/blocks_rd50_st_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_0.30.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 0.3mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_rd50_st_0.40.inst.cfg b/resources/variants/blocks/blocks_rd50_st_0.40.inst.cfg index 25e532806c..e3f983411d 100644 --- a/resources/variants/blocks/blocks_rd50_st_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 0.4mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_rd50_st_0.50.inst.cfg b/resources/variants/blocks/blocks_rd50_st_0.50.inst.cfg index b2ddccc5f4..8aea07b060 100644 --- a/resources/variants/blocks/blocks_rd50_st_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 0.5mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_rd50_st_0.60.inst.cfg b/resources/variants/blocks/blocks_rd50_st_0.60.inst.cfg index 26c935295e..34b0231f54 100644 --- a/resources/variants/blocks/blocks_rd50_st_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 0.6mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_rd50_st_0.80.inst.cfg b/resources/variants/blocks/blocks_rd50_st_0.80.inst.cfg index 1669cf64cf..dac9b072ca 100644 --- a/resources/variants/blocks/blocks_rd50_st_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 0.8mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_rd50_st_1.0.inst.cfg b/resources/variants/blocks/blocks_rd50_st_1.0.inst.cfg index 8063578912..32d49cc6df 100644 --- a/resources/variants/blocks/blocks_rd50_st_1.0.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_1.0.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 1.0mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.0 \ No newline at end of file +machine_nozzle_size = 1.0 + diff --git a/resources/variants/blocks/blocks_rd50_st_1.2.inst.cfg b/resources/variants/blocks/blocks_rd50_st_1.2.inst.cfg index a3d4c4f424..e1c4290f27 100644 --- a/resources/variants/blocks/blocks_rd50_st_1.2.inst.cfg +++ b/resources/variants/blocks/blocks_rd50_st_1.2.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 1.2mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.20 \ No newline at end of file +machine_nozzle_size = 1.20 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_ht_0.3.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_ht_0.3.inst.cfg index 8204aa3d94..fa4c424345 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_ht_0.3.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_ht_0.3.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = HT - 0.3mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_ht_0.4.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_ht_0.4.inst.cfg index f50d54a1f8..476d53c555 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_ht_0.4.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_ht_0.4.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = HT - 0.4mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_ht_0.5.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_ht_0.5.inst.cfg index fb0fcb6c50..86324e1f67 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_ht_0.5.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_ht_0.5.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = HT - 0.5mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_ht_0.6.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_ht_0.6.inst.cfg index 03fc90d8fc..7fc289f445 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_ht_0.6.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_ht_0.6.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = HT - 0.6mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_ht_0.8.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_ht_0.8.inst.cfg index f3e2c56bfa..6311c06b4d 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_ht_0.8.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_ht_0.8.inst.cfg @@ -1,13 +1,13 @@ - [general] +definition = blocks_rd50duplicate name = HT - 0.8mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_0.20.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_0.20.inst.cfg index 9b321149c1..522891b82f 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_0.20.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 0.2mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_0.30.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_0.30.inst.cfg index cbdd60c61f..b52353084f 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_0.30.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 0.3mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_0.40.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_0.40.inst.cfg index 330ea7a1df..149e9d2528 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 0.4mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_0.50.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_0.50.inst.cfg index e003b8f7cb..a98e14bf1e 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 0.5mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_0.60.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_0.60.inst.cfg index d82d77f8c0..a5ad088795 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 0.6mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_0.80.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_0.80.inst.cfg index 54b53c9306..dc72bfa5bc 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 0.8mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_1.0.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_1.0.inst.cfg index 272422e9b9..49b2eb8219 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_1.0.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_1.0.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 1.0mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.0 \ No newline at end of file +machine_nozzle_size = 1.0 + diff --git a/resources/variants/blocks/blocks_rd50duplicate_st_1.2.inst.cfg b/resources/variants/blocks/blocks_rd50duplicate_st_1.2.inst.cfg index 391acde673..3f0af5268d 100644 --- a/resources/variants/blocks/blocks_rd50duplicate_st_1.2.inst.cfg +++ b/resources/variants/blocks/blocks_rd50duplicate_st_1.2.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50duplicate name = ST - 1.2mm version = 4 -definition = blocks_rd50duplicate [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.20 \ No newline at end of file +machine_nozzle_size = 1.20 + diff --git a/resources/variants/blocks/blocks_rd50mirror_ht_0.3.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_ht_0.3.inst.cfg index ffde22201b..815f7f81d1 100644 --- a/resources/variants/blocks/blocks_rd50mirror_ht_0.3.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_ht_0.3.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = HT - 0.3mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_rd50mirror_ht_0.4.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_ht_0.4.inst.cfg index 523227ce6a..1f651a94dd 100644 --- a/resources/variants/blocks/blocks_rd50mirror_ht_0.4.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_ht_0.4.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = HT - 0.4mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_rd50mirror_ht_0.5.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_ht_0.5.inst.cfg index f5c3b5aae7..e3ab7f107d 100644 --- a/resources/variants/blocks/blocks_rd50mirror_ht_0.5.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_ht_0.5.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = HT - 0.5mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_rd50mirror_ht_0.6.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_ht_0.6.inst.cfg index c25bd12bff..46733866a7 100644 --- a/resources/variants/blocks/blocks_rd50mirror_ht_0.6.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_ht_0.6.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = HT - 0.6mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_rd50mirror_ht_0.8.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_ht_0.8.inst.cfg index 859cd23cfb..820a854351 100644 --- a/resources/variants/blocks/blocks_rd50mirror_ht_0.8.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_ht_0.8.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = HT - 0.8mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_0.20.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_0.20.inst.cfg index 5357e2705c..ee0c348236 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_0.20.inst.cfg @@ -1,13 +1,13 @@ - [general] +definition = blocks_rd50mirror name = ST - 0.2mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_0.30.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_0.30.inst.cfg index 63ecdd2483..640dff17a6 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_0.30.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = ST - 0.3mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_0.40.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_0.40.inst.cfg index d37127da2d..80fa3a282e 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = ST - 0.4mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_0.50.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_0.50.inst.cfg index 5878d15ecd..012d378bed 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = ST - 0.5mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_0.60.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_0.60.inst.cfg index 69ab9d732f..d4df1f1659 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = ST - 0.6mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_0.80.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_0.80.inst.cfg index 7a8c55fa43..f1b525d16e 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = ST - 0.8mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_1.0.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_1.0.inst.cfg index 03ad78bf29..3f06995fcb 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_1.0.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_1.0.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50mirror name = ST - 1.0mm version = 4 -definition = blocks_rd50mirror [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.0 \ No newline at end of file +machine_nozzle_size = 1.0 + diff --git a/resources/variants/blocks/blocks_rd50mirror_st_1.2.inst.cfg b/resources/variants/blocks/blocks_rd50mirror_st_1.2.inst.cfg index a3d4c4f424..e1c4290f27 100644 --- a/resources/variants/blocks/blocks_rd50mirror_st_1.2.inst.cfg +++ b/resources/variants/blocks/blocks_rd50mirror_st_1.2.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_rd50 name = ST - 1.2mm version = 4 -definition = blocks_rd50 [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 1.20 \ No newline at end of file +machine_nozzle_size = 1.20 + diff --git a/resources/variants/blocks/blocks_zero_0.20.inst.cfg b/resources/variants/blocks/blocks_zero_0.20.inst.cfg index 16dfa285e9..2c0d41b2a5 100644 --- a/resources/variants/blocks/blocks_zero_0.20.inst.cfg +++ b/resources/variants/blocks/blocks_zero_0.20.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_zero name = 0.2mm Nozzle version = 4 -definition = blocks_zero [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.2 \ No newline at end of file +machine_nozzle_size = 0.2 + diff --git a/resources/variants/blocks/blocks_zero_0.30.inst.cfg b/resources/variants/blocks/blocks_zero_0.30.inst.cfg index 3afc1672a3..b7466a324e 100644 --- a/resources/variants/blocks/blocks_zero_0.30.inst.cfg +++ b/resources/variants/blocks/blocks_zero_0.30.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_zero name = 0.3mm Nozzle version = 4 -definition = blocks_zero [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.3 \ No newline at end of file +machine_nozzle_size = 0.3 + diff --git a/resources/variants/blocks/blocks_zero_0.40.inst.cfg b/resources/variants/blocks/blocks_zero_0.40.inst.cfg index 2de852b812..a2931960c8 100644 --- a/resources/variants/blocks/blocks_zero_0.40.inst.cfg +++ b/resources/variants/blocks/blocks_zero_0.40.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_zero name = 0.4mm Nozzle version = 4 -definition = blocks_zero [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 + diff --git a/resources/variants/blocks/blocks_zero_0.50.inst.cfg b/resources/variants/blocks/blocks_zero_0.50.inst.cfg index 39b3506ca3..213c54fa29 100644 --- a/resources/variants/blocks/blocks_zero_0.50.inst.cfg +++ b/resources/variants/blocks/blocks_zero_0.50.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_zero name = 0.5mm Nozzle version = 4 -definition = blocks_zero [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.5 \ No newline at end of file +machine_nozzle_size = 0.5 + diff --git a/resources/variants/blocks/blocks_zero_0.60.inst.cfg b/resources/variants/blocks/blocks_zero_0.60.inst.cfg index e1deeef405..b2d5b98648 100644 --- a/resources/variants/blocks/blocks_zero_0.60.inst.cfg +++ b/resources/variants/blocks/blocks_zero_0.60.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_zero name = 0.6mm Nozzle version = 4 -definition = blocks_zero [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.6 \ No newline at end of file +machine_nozzle_size = 0.6 + diff --git a/resources/variants/blocks/blocks_zero_0.80.inst.cfg b/resources/variants/blocks/blocks_zero_0.80.inst.cfg index 5ae84a50f0..70a8b13a30 100644 --- a/resources/variants/blocks/blocks_zero_0.80.inst.cfg +++ b/resources/variants/blocks/blocks_zero_0.80.inst.cfg @@ -1,12 +1,13 @@ [general] +definition = blocks_zero name = 0.8mm Nozzle version = 4 -definition = blocks_zero [metadata] +hardware_type = nozzle setting_version = 20 type = variant -hardware_type = nozzle [values] -machine_nozzle_size = 0.8 \ No newline at end of file +machine_nozzle_size = 0.8 +