Merge branch '5.10' into PP-602-New-S-line-configurations

resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm.inst.cfg

@@ -13,8 +13,10 @@ weight = -2
 
 [values]
 infill_overlap = 20
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
-speed_print = 100
-speed_wall_0 = =speed_print
+infill_pattern = lines
+speed_print = 40
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
 support_interface_enable = True
+wall_thickness = =wall_line_width_0 + 2*wall_line_width_x
 

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.15mm.inst.cfg

@@ -13,17 +13,23 @@ weight = -1
 
 [values]
 acceleration_prime_tower = 1500
+acceleration_support = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
 minimum_support_area = 4
+retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-speed_prime_tower = 25
+speed_prime_tower = 50
 speed_support = 50
-support_angle = 45
+speed_support_bottom = =2*speed_support_interface/5
+speed_support_interface = 50
+support_bottom_density = 70
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True
 support_z_distance = 0

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.1mm.inst.cfg

@@ -13,18 +13,24 @@ weight = 0
 
 [values]
 acceleration_prime_tower = 1500
+acceleration_support = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4
+retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-speed_prime_tower = 25
+speed_prime_tower = 50
 speed_support = 50
-support_angle = 45
+speed_support_bottom = =2*speed_support_interface/5
+speed_support_interface = 50
+support_bottom_density = 70
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True
 support_z_distance = 0

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.2mm.inst.cfg

@@ -13,18 +13,24 @@ weight = -2
 
 [values]
 acceleration_prime_tower = 1500
+acceleration_support = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4
+retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-speed_prime_tower = 25
+speed_prime_tower = 50
 speed_support = 50
-support_angle = 45
+speed_support_bottom = =2*speed_support_interface/5
+speed_support_interface = 50
+support_bottom_density = 70
 support_interface_enable = True
 support_z_distance = 0
 

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.3mm.inst.cfg

@@ -13,18 +13,24 @@ weight = -3
 
 [values]
 acceleration_prime_tower = 1500
+acceleration_support = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4
+retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-speed_prime_tower = 25
+speed_prime_tower = 50
 speed_support = 50
-support_angle = 45
+speed_support_bottom = =2*speed_support_interface/5
+speed_support_interface = 50
+support_bottom_density = 70
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True
 support_z_distance = 0

resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm.inst.cfg

@@ -14,6 +14,8 @@ weight = -2
 [values]
 cool_min_layer_time = 6
 cool_min_layer_time_fan_speed_max = 12
-retraction_amount = 8
+inset_direction = inside_out
+material_flow = 95
 retraction_prime_speed = 15
+speed_wall_x = =speed_wall_0