From 5f6894c52341ea5339697e40e833abf17598077d Mon Sep 17 00:00:00 2001
From: Ghostkeeper <rubend@tutanota.com>
Date: Fri, 23 Jun 2017 11:14:21 +0200
Subject: [PATCH] Add PP profiles for UM2+

These new profiles are directly copied from what the material team provides. They should now be optimised.

Contributes to issue CURA-3960.
---
 .../ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg | 93 ++++++++++++++++++
 .../um2p_pp_0.4_normal.inst.cfg               | 93 ++++++++++++++++++
 .../um2p_pp_0.6_draft.inst.cfg                | 95 +++++++++++++++++++
 .../ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg | 95 +++++++++++++++++++
 .../um2p_pp_0.8_draft.inst.cfg                | 95 +++++++++++++++++++
 .../ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg | 95 +++++++++++++++++++
 6 files changed, 566 insertions(+)
 create mode 100644 resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
 create mode 100644 resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
 create mode 100644 resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
 create mode 100644 resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
 create mode 100644 resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
 create mode 100644 resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg

diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..2e5120b0d7
--- /dev/null
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
@@ -0,0 +1,93 @@
+[general]
+version = 2
+name = Fast Quality
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.4_mm
+weight = 0
+quality_type = fast
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.4 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height = 0.15
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_amount = 8
+retraction_count_max = 12
+retraction_extra_prime_amount = 0
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+retraction_speed = 35
+skin_overlap = 10
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 0.8
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
+wall_thickness = 0.76
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..f311c28fc8
--- /dev/null
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
@@ -0,0 +1,93 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.4 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height = 0.1
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_amount = 8
+retraction_count_max = 12
+retraction_extra_prime_amount = 0
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+retraction_speed = 35
+skin_overlap = 10
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 0.8
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
+wall_thickness = 0.76
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
new file mode 100644
index 0000000000..341a35926a
--- /dev/null
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@@ -0,0 +1,95 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.6_mm
+weight = 0
+quality_type = draft
+
+[values]
+layer_height = 0.2
+gradual_infill_steps = 3
+retraction_extra_prime_amount = 0
+skirt_brim_line_width = 0.6
+infill_overlap_mm = 0
+skin_overlap = 10
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+infill_line_width = =round(line_width * 0.6 / 0.57, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_amount = 8
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+retraction_speed = 35
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
+wall_thickness = 1.14
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
new file mode 100644
index 0000000000..d1790dde47
--- /dev/null
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
@@ -0,0 +1,95 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.6_mm
+weight = -1
+quality_type = fast
+
+[values]
+layer_height = 0.15
+gradual_infill_steps = 3
+retraction_extra_prime_amount = 0
+skirt_brim_line_width = 0.6
+infill_overlap_mm = 0
+skin_overlap = 10
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+infill_line_width = =round(line_width * 0.6 / 0.57, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_amount = 8
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+retraction_speed = 35
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
+wall_thickness = 1.14
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
new file mode 100644
index 0000000000..2a6397d2e8
--- /dev/null
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
@@ -0,0 +1,95 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.8_mm
+weight = 0
+quality_type = draft
+
+[values]
+layer_height = 0.3
+gradual_infill_steps = 3
+retraction_extra_prime_amount = 0
+skirt_brim_line_width = 0.8
+infill_overlap_mm = 0
+skin_overlap = 10
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+infill_line_width = =round(line_width * 0.8 / 0.76, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_amount = 8
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+retraction_speed = 35
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.5
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
+wall_thickness = 1.52
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg
new file mode 100644
index 0000000000..185597ef74
--- /dev/null
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg
@@ -0,0 +1,95 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.8_mm
+weight = 0
+quality_type = fast
+
+[values]
+layer_height = 0.2
+gradual_infill_steps = 3
+retraction_extra_prime_amount = 0
+skirt_brim_line_width = 0.8
+infill_overlap_mm = 0
+skin_overlap = 10
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 3
+infill_line_width = =round(line_width * 0.8 / 0.76, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_amount = 8
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+retraction_speed = 35
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.5
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
+wall_thickness = 1.52
\ No newline at end of file