diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg index fb88768bb6..62e3254f8b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg index 967051c6b6..b61495c66f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg index c08c5e37c1..2b113bb10c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg index 9bf56f69a2..7c1de8fd56 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg index 63e20e56bd..7bde0a1a84 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg index b65a22fbdc..ed573773e1 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg index a90a1b971d..b5e414e2a7 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg index e2997ae696..f1a72ac90b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg index a57cbf0af0..61916c3da7 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg index 48ce65c800..75345728fb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg index 3866a4593a..7b919a96f5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg index b5834b5757..43edfa3548 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg index 63b0273ba5..62a6fb4fdf 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg index 00c264aa32..a251a24a6e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg index 0bb1797b46..464c17a430 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg index 0ab18817e0..5f6d7ee67b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg index f6b7800386..2dcc5e1850 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg index b4516e44dd..c0c3ccc383 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg index 5c78ea044d..411d22b0ab 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg @@ -12,9 +12,13 @@ type = intent variant = AA 0.4 [values] +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +infill_sparse_density = 20 jerk_print = 30 speed_infill = =speed_print -speed_print = 30 +speed_print = 35 +speed_roofing = =speed_topbottom speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg index 5f73432e1c..9a3c677fe9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg @@ -12,6 +12,14 @@ type = intent variant = AA 0.4 [values] -speed_infill = 50 -top_bottom_thickness = 1.05 +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5 +acceleration_print = 2500 +acceleration_wall_0 = 1000 +inset_direction = inside_out +jerk_wall_0 = 20 +speed_print = 50 +speed_roofing = =math.ceil(speed_wall*(35/50)) +speed_wall_0 = =math.ceil(speed_wall*(20/50)) +speed_wall_x = =math.ceil(speed_wall*(35/50)) +top_bottom_thickness = =max(1.2 , layer_height * 6) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg index 40058561ac..3fc09bbc49 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg @@ -12,11 +12,62 @@ variant = AA 0.25 weight = 0 [values] -cool_fan_speed_0 = 0 -material_print_temperature = =default_material_print_temperature - 20 -speed_topbottom = =math.ceil(speed_print * 30 / 55) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.8 +optimize_wall_printing_order = False +prime_tower_enable = False +raft_airgap = 0.15 +retraction_amount = 6.5 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg index fe8efb08d8..1aa26ebcfc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg @@ -12,12 +12,61 @@ variant = AA 0.25 weight = 0 [values] -material_print_temperature = =default_material_print_temperature - 15 -speed_infill = =math.ceil(speed_print * 40 / 55) -speed_topbottom = =math.ceil(speed_print * 30 / 55) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.4 +machine_nozzle_heat_up_speed = 1.7 +material_extrusion_cool_down_speed = 0.7 +optimize_wall_printing_order = False +prime_tower_enable = False +retraction_amount = 8 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 0.8 +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg index b9ec617a19..3343f7627a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg @@ -12,21 +12,62 @@ variant = AA 0.25 weight = 0 [values] -brim_width = 8 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 10 -retraction_hop = 0.2 -speed_print = 30 -speed_wall = =math.ceil(speed_print * 25 / 30) -speed_wall_0 = =math.ceil(speed_print * 20 / 30) +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +optimize_wall_printing_order = False +prime_tower_enable = False +raft_airgap = 0.25 +retraction_amount = 6.5 +retraction_prime_speed = =retraction_speed +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 0.72 -travel_avoid_distance = 0.4 -wall_0_inset = 0.015 -wall_0_wipe_dist = 0.25 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg index 312afa0421..85dc32801e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 1 [values] -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature - 10 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.8 +material_max_flowrate = 20 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_print = 50 -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 30 / 50) +retraction_amount = 6.5 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg index b53e8275a2..ca1d9d7afc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 0 [values] -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.8 +material_max_flowrate = 20 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 55) -speed_print = 55 -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_wall = =math.ceil(speed_print * 30 / 55) +retraction_amount = 6.5 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg index 1b7919bd02..0e9ceaf9e3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg @@ -12,16 +12,62 @@ variant = AA 0.4 weight = 1 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 10 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_print = 50 -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 30 / 50) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.4 +machine_nozzle_heat_up_speed = 1.7 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 20 +optimize_wall_printing_order = False +prime_tower_enable = False +retraction_amount = 8 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg index afa05aa2cf..6f8db11141 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg @@ -12,16 +12,62 @@ variant = AA 0.4 weight = 0 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 5 -speed_infill = =math.ceil(speed_print * 45 / 55) -speed_print = 55 -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_wall = =math.ceil(speed_print * 30 / 55) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.4 +machine_nozzle_heat_up_speed = 1.7 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 20 +optimize_wall_printing_order = False +prime_tower_enable = False +retraction_amount = 8 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg index 2939389a3c..25887f19d7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 1 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 12 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed -speed_print = 50 -speed_topbottom = =math.ceil(speed_print * 35 / 50) -speed_wall = =math.ceil(speed_print * 35 / 50) +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg index 2b430c1afb..e8820673ea 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg @@ -12,14 +12,63 @@ variant = AA 0.4 weight = 0 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 12 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg index c84c2fb66e..73f25eae0f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 1 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 14 +optimize_wall_printing_order = False prime_tower_enable = False +raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed -speed_print = 45 -speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 26 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1.2 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg index 47687fb5be..e51d440c31 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 0 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 14 +optimize_wall_printing_order = False prime_tower_enable = False +raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed -speed_print = 45 -speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 26 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1.2 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg index 0dc15571d7..39ceb39dce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg @@ -12,11 +12,62 @@ variant = AA 0.25 weight = 0 [values] -cool_fan_speed_0 = 0 -material_print_temperature = =default_material_print_temperature - 20 -speed_topbottom = =math.ceil(speed_print * 30 / 55) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.8 +optimize_wall_printing_order = False +prime_tower_enable = False +raft_airgap = 0.15 +retraction_amount = 6.5 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg index c5cadca4bd..82e07b6fdf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg @@ -12,12 +12,61 @@ variant = AA 0.25 weight = 0 [values] -material_print_temperature = =default_material_print_temperature - 15 -speed_infill = =math.ceil(speed_print * 40 / 55) -speed_topbottom = =math.ceil(speed_print * 30 / 55) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.4 +machine_nozzle_heat_up_speed = 1.7 +material_extrusion_cool_down_speed = 0.7 +optimize_wall_printing_order = False +prime_tower_enable = False +retraction_amount = 8 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 0.8 +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg index c6d2afaf03..789d186f77 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg @@ -12,21 +12,62 @@ variant = AA 0.25 weight = 0 [values] -brim_width = 8 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 10 -retraction_hop = 0.2 -speed_print = 30 -speed_wall = =math.ceil(speed_print * 25 / 30) -speed_wall_0 = =math.ceil(speed_print * 20 / 30) +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +optimize_wall_printing_order = False +prime_tower_enable = False +raft_airgap = 0.25 +retraction_amount = 6.5 +retraction_prime_speed = =retraction_speed +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 0.72 -travel_avoid_distance = 0.4 -wall_0_inset = 0.015 -wall_0_wipe_dist = 0.25 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg index a69ff33f76..fbe230fb2e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 1 [values] -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature - 10 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.8 +material_max_flowrate = 20 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_print = 50 -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 30 / 50) +retraction_amount = 6.5 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg index ca659622cb..8ef78a6fb5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 0 [values] -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.8 +material_max_flowrate = 20 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 55) -speed_print = 55 -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_wall = =math.ceil(speed_print * 30 / 55) +retraction_amount = 6.5 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg index 9545d34977..aea8906877 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg @@ -12,16 +12,62 @@ variant = AA 0.4 weight = 1 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 10 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_print = 50 -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_wall = =math.ceil(speed_print * 30 / 50) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.4 +machine_nozzle_heat_up_speed = 1.7 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 20 +optimize_wall_printing_order = False +prime_tower_enable = False +retraction_amount = 8 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg index 4a20bd76b3..a9d239bf3a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg @@ -12,16 +12,62 @@ variant = AA 0.4 weight = 0 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 5 -speed_infill = =math.ceil(speed_print * 45 / 55) -speed_print = 55 -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_wall = =math.ceil(speed_print * 30 / 55) +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 4 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.4 +machine_nozzle_heat_up_speed = 1.7 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 20 +optimize_wall_printing_order = False +prime_tower_enable = False +retraction_amount = 8 +retraction_prime_speed = 15 +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height +top_bottom_thickness = =max(1.2 , layer_height * 6) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg index c2bb123d04..a9043c7372 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 1 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 12 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed -speed_print = 50 -speed_topbottom = =math.ceil(speed_print * 35 / 50) -speed_wall = =math.ceil(speed_print * 35 / 50) +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg index 1e2820f565..4e451d4165 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg @@ -12,14 +12,63 @@ variant = AA 0.4 weight = 0 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 12 +optimize_wall_printing_order = False prime_tower_enable = False raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 30 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg index 595de835ba..641c1279e4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 1 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 14 +optimize_wall_printing_order = False prime_tower_enable = False +raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed -speed_print = 45 -speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 26 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1.2 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg index 07c97a632f..35e8c0903c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -12,18 +12,63 @@ variant = AA 0.4 weight = 0 [values] -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2 +acceleration_infill = =acceleration_print +acceleration_ironing = 1000 +acceleration_layer_0 = =acceleration_wall_0 +acceleration_print = 3500 +acceleration_roofing = =acceleration_wall_0 +acceleration_topbottom = =acceleration_wall +acceleration_wall = =acceleration_infill +acceleration_wall_0 = 1500 +acceleration_wall_x = =acceleration_wall +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_speed = 30 +cool_min_layer_time = 6 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' +infill_sparse_density = 15 +jerk_infill = =jerk_print +jerk_layer_0 = =jerk_wall_0 +jerk_print = =max(30, speed_print/2) +jerk_roofing = =jerk_wall_0 +jerk_topbottom = =jerk_wall +jerk_wall = =jerk_infill +jerk_wall_0 = =max(30, speed_wall_0/2) +machine_nozzle_cool_down_speed = 1.3 +machine_nozzle_heat_up_speed = 1.9 +material_extrusion_cool_down_speed = 0.7 +material_max_flowrate = 14 +optimize_wall_printing_order = False prime_tower_enable = False +raft_airgap = 0.25 +retraction_amount = 6.5 retraction_prime_speed = =retraction_speed -speed_print = 45 -speed_topbottom = =math.ceil(speed_print * 35 / 45) -speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +retraction_speed = 45 +small_skin_on_surface = False +small_skin_width = 4 +speed_infill = =speed_print +speed_ironing = 20 +speed_layer_0 = 26 +speed_prime_tower = =speed_wall_0 +speed_print = 100 +speed_roofing = =math.ceil(speed_wall*(45/100)) +speed_support_interface = =speed_wall_0 +speed_topbottom = =speed_print +speed_wall = =speed_infill +speed_wall_0 = =math.ceil(speed_wall*(20/100)) +speed_wall_x = =speed_wall +speed_wall_x_roofing = =speed_roofing support_bottom_distance = =support_z_distance support_interface_enable = True +support_structure = tree support_top_distance = =support_z_distance support_z_distance = =math.ceil(0.3/layer_height)*layer_height -top_bottom_thickness = 1.2 +top_bottom_thickness = =max(1 , layer_height * 5) +wall_0_wipe_dist = 0.8 +z_seam_relative = True +z_seam_type = back +zig_zaggify_infill = True