From 5f9fc5740ece3e8590ee67316eddf1c947d8ee7d Mon Sep 17 00:00:00 2001 From: "p.kuiper" Date: Wed, 29 Sep 2021 12:32:50 +0200 Subject: [PATCH] Print profile improvements: - Infill pattern: from triangles to lines => less strong but better visual appearance on large horizontal surfaces - Infill before walls: from true to false => prevent infill push out walls and show artefacts - skin_monotonic:from false to true => low reduction in print time vs large quality increase Note: this switch also sets: retraction_combing from 'all' to 'noskin' The 'noskin' options prevents scarring in top surfaces and gloss streaking in large horizontal surfaces See: CURA-7976 for details - wall_material_flow: from 100% to 90% => reduces line width variations due to overextrusion in walls. Less gloss streaking and more uniform horizontal walls - top_bottom_pattern: from lines to zigzag => prevent the short jerky travel moves of the lines pattern around the walls. Results in a nicer top surface - meshfix_maximum_resolution from (speed_wall_0 + speed_wall_x) / 60 to (speed_wall_0 + speed_wall_x) / 150 => reduce visibility of line segments due to rounding. This will create a higher change of a buffer underrun = surface blobs --- resources/definitions/ultimaker_s5.def.json | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 446eaf513d..dd3f42f284 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -93,8 +93,9 @@ "cool_min_speed": { "value": "5" }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'triangles'" }, + "infill_pattern": { "value": "'lines'" }, "infill_wipe_dist": { "value": "0" }, + "infill_before_walls": { "value": false }, "jerk_enabled": { "value": "True" }, "jerk_layer_0": { "value": "jerk_topbottom" }, "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, @@ -132,6 +133,7 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, + "skin_monotonic" : { "value": true }, "skin_overlap": { "value": "10" }, "speed_equalize_flow_enabled": { "value": "True" }, "speed_layer_0": { "value": "20" }, @@ -151,16 +153,18 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern" : {"value": "zigzag"}, "top_bottom_thickness": { "value": "1" }, "travel_avoid_supports": { "value": "True" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" }, "wall_thickness": { "value": "1" }, - "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, + "wall_material_flow": {"value": 90}, + "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, "optimize_wall_printing_order": { "value": "True" }, - "retraction_combing": { "default_value": "all" }, + "retraction_combing": { "default_value": "noskin" }, "initial_layer_line_width_factor": { "value": "120" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }, "build_volume_temperature": { "maximum_value": 50 }