Merge branch '2.6'

plugins/ChangeLogPlugin/ChangeLog.txt

@@ -1,3 +1,7 @@
+[2.6.1]
+*New profiles
+The Polypropylene material is added and supported with the Ultimaker 3. Support for CPE+ and PC with 0.8mm nozzles is added as well.
+
 [2.6.0]
 *Cura versions
 Cura 2.6 has local version folders, which means the new version won’t overwrite the existing configuration and profiles from older versions, but can create a new folder instead. You can now safely check out new beta versions and, if necessary, start up an older version without the danger of losing your profiles.

resources/i18n/ko/fdmextruder.def.json.po

@@ -8,183 +8,184 @@ msgstr ""
 "Project-Id-Version: Cura 2.6\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2017-05-30 15:32+0000\n"
-"PO-Revision-Date: 2017-03-27 17:27+0000\n"
+"PO-Revision-Date: 2017-06-19 17:36+0900\n"
 "Last-Translator: None\n"
 "Language-Team: None\n"
-"Language: Korean\n"
+"Language: ko\n"
 "Lang-Code: ko\n"
 "Country-Code: KR\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Poedit 2.0.1\n"
 
 #: fdmextruder.def.json
 msgctxt "machine_settings label"
 msgid "Machine"
-msgstr ""
+msgstr "장비 "
 
 #: fdmextruder.def.json
 msgctxt "machine_settings description"
 msgid "Machine specific settings"
-msgstr ""
+msgstr "장비 별 설정 "
 
 #: fdmextruder.def.json
 msgctxt "extruder_nr label"
 msgid "Extruder"
-msgstr ""
+msgstr "압출기 "
 
 #: fdmextruder.def.json
 msgctxt "extruder_nr description"
 msgid "The extruder train used for printing. This is used in multi-extrusion."
-msgstr ""
+msgstr "인쇄에 사용되는 압출기 트레인. 이것은 다중 압출에 사용됩니다. "
 
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_size label"
 msgid "Nozzle Diameter"
-msgstr ""
+msgstr "노즐 지름"
 
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_size description"
 msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
-msgstr ""
+msgstr "노즐의 내경. 비표준 노즐 크기를 사용할 때, 본 설정을 변경하십시오. "
 
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_offset_x label"
 msgid "Nozzle X Offset"
-msgstr ""
+msgstr "노즐 X 오프셋 "
 
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_offset_x description"
 msgid "The x-coordinate of the offset of the nozzle."
-msgstr ""
+msgstr "노즐 오프셋의 x 좌표입니다. "
 
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_offset_y label"
 msgid "Nozzle Y Offset"
-msgstr ""
+msgstr "노즐 Y 오프셋"
 
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_offset_y description"
 msgid "The y-coordinate of the offset of the nozzle."
-msgstr ""
+msgstr "노즐 오프셋의 y 좌표입니다. "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_code label"
 msgid "Extruder Start G-Code"
-msgstr ""
+msgstr "압출기 시작 G 코드"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_code description"
 msgid "Start g-code to execute whenever turning the extruder on."
-msgstr ""
+msgstr "압출기를 켤 때마다 실행할 g 코드를 시작하십시오. "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs label"
 msgid "Extruder Start Position Absolute"
-msgstr ""
+msgstr "압출기 시작 위치의 절대 값 "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
 msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-msgstr ""
+msgstr "압출기 시작 위치를 헤드의 마지막으로 알려진 위치에 상대적이 아닌 절대 위치로 만듭니다."
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_x label"
 msgid "Extruder Start Position X"
-msgstr ""
+msgstr "압출기 시작 X의 위치 "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_x description"
 msgid "The x-coordinate of the starting position when turning the extruder on."
-msgstr ""
+msgstr "압출기를 켤 때 시작 위치의 x 좌표. "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_y label"
 msgid "Extruder Start Position Y"
-msgstr ""
+msgstr "압출기 시작 위치 Y "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_y description"
 msgid "The y-coordinate of the starting position when turning the extruder on."
-msgstr ""
+msgstr "압출기를 켤 때 시작 위치의 y 좌표입니다. "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_code label"
 msgid "Extruder End G-Code"
-msgstr ""
+msgstr "압출기 최종 G 코드 "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_code description"
 msgid "End g-code to execute whenever turning the extruder off."
-msgstr ""
+msgstr "압출기를 끌 때마다 실행할 g 코드를 종료하십시오. "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs label"
 msgid "Extruder End Position Absolute"
-msgstr ""
+msgstr "압출기 끝 절대 위치 "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
 msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-msgstr ""
+msgstr "압출 성형기가 헤드의 마지막으로 알려진 위치에 상대적이 아닌 절대 위치로 끝나도록하십시오. "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_x label"
 msgid "Extruder End Position X"
-msgstr ""
+msgstr "압출기 끝 X 위치 "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_x description"
 msgid "The x-coordinate of the ending position when turning the extruder off."
-msgstr ""
+msgstr "압출기를 끌 때 끝 위치의 x 좌표."
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_y label"
 msgid "Extruder End Position Y"
-msgstr ""
+msgstr "압출기 끝 Y 위치 "
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_y description"
 msgid "The y-coordinate of the ending position when turning the extruder off."
-msgstr ""
+msgstr "압출기를 끌 때 종료 위치의 y 좌표입니다. "
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z label"
 msgid "Extruder Prime Z Position"
-msgstr ""
+msgstr "압출기 프라임 Z 위치 "
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
 msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-msgstr ""
+msgstr "인쇄가 시작될 때 노즐이 끝나는 위치의 Z 좌표입니다. "
 
 #: fdmextruder.def.json
 msgctxt "platform_adhesion label"
 msgid "Build Plate Adhesion"
-msgstr ""
+msgstr "플레이트 접착력 강화 "
 
 #: fdmextruder.def.json
 msgctxt "platform_adhesion description"
 msgid "Adhesion"
-msgstr ""
+msgstr "부착 "
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x label"
 msgid "Extruder Prime X Position"
-msgstr ""
+msgstr "압출기 프라임 X 위치 "
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
 msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-msgstr ""
+msgstr "인쇄가 시작될 때 노즐이 끝내는 위치의 X 좌표입니다. "
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y label"
 msgid "Extruder Prime Y Position"
-msgstr ""
+msgstr "압출기 프라임 Y 위치 "
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
 msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-msgstr ""
+msgstr "인쇄가 시작될 때 노즐이 끝내는 위치의 Y 좌표입니다. "

resources/qml/Preferences/GeneralPage.qml

@@ -153,7 +153,7 @@ UM.PreferencesPage
                             append({ text: "Français", code: "fr" })
                             append({ text: "Italiano", code: "it" })
                             append({ text: "日本語", code: "jp" })
-                            //append({ text: "한국어", code: "ko" })
+                            append({ text: "한국어", code: "ko" })
                             append({ text: "Nederlands", code: "nl" })
                             append({ text: "Português do Brasil", code: "ptbr" })
                             append({ text: "Русский", code: "ru" })

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -0,0 +1,76 @@
+[general]
+version = 2
+name = Normal
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.4_mm
+weight = -1
+quality_type = fast
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.4 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+layer_height = 0.15
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
+wall_thickness = 0.76

resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg

@@ -0,0 +1,75 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.4_mm
+weight = 0
+quality_type = normal
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.4 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
+wall_thickness = 0.76

resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg

@@ -0,0 +1,79 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.6_mm
+weight = -2
+quality_type = draft
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.6 / 0.57, 2)
+infill_overlap = 0
+infill_overlap_mm = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+layer_height = 0.2
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.6
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
+wall_thickness = 1.14

resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg

@@ -0,0 +1,79 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.6_mm
+weight = -1
+quality_type = fast
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.6 / 0.57, 2)
+infill_overlap = 0
+infill_overlap_mm = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+layer_height = 0.15
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.6
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
+wall_thickness = 1.14

resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg

@@ -0,0 +1,79 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.8_mm
+weight = -2
+quality_type = fast
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 3
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.8 / 0.76, 2)
+infill_overlap = 0
+infill_overlap_mm = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+layer_height = 0.2
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.8
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.5
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
+wall_thickness = 1.52

resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg

@@ -0,0 +1,79 @@
+[general]
+version = 2
+name = Extra Fast
+definition = ultimaker2_plus
+
+[metadata]
+type = quality
+material = generic_polypropylene_ultimaker2_plus_0.8_mm
+weight = -3
+quality_type = draft
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
+infill_line_width = =round(line_width * 0.8 / 0.76, 2)
+infill_overlap = 0
+infill_overlap_mm = 0
+infill_pattern = cubic
+infill_sparse_density = 96
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+layer_height = 0.3
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.8
+speed_layer_0 = 25
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.5
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
+wall_thickness = 1.52

resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg

@@ -0,0 +1,65 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_polypropylene_ultimaker3_AA_0.4
+weight = -2
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+layer_height = 0.2
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 205
+material_initial_print_temperature = 210
+material_print_temperature = 215
+material_print_temperature_layer_0 = 220
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_amount = 6.5
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+speed_equalize_flow_enabled = True
+speed_layer_0 = 15
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg

@@ -0,0 +1,65 @@
+[general]
+version = 2
+name = Normal
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = fast
+material = generic_polypropylene_ultimaker3_AA_0.4
+weight = -1
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+layer_height = 0.15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 195
+material_initial_print_temperature = 205
+material_print_temperature = 207
+material_print_temperature_layer_0 = 210
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+speed_equalize_flow_enabled = True
+speed_layer_0 = 15
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -0,0 +1,64 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_polypropylene_ultimaker3_AA_0.4
+weight = 0
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 195
+material_initial_print_temperature = 200
+material_print_temperature = 205
+material_print_temperature_layer_0 = 208
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+speed_equalize_flow_enabled = True
+speed_layer_0 = 15
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -29,25 +29,24 @@ jerk_print = 25
 layer_height = 0.2
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_cool_down_speed = 0.5
-machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 2
+retraction_hop = 1.5
-retraction_hop_enabled = False
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
+skin_overlap = 5
 speed_equalize_flow_enabled = True
 speed_layer_0 = 18
 speed_print = 25
@@ -56,12 +55,11 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
 support_angle = 50
-skin_overlap = 5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
-wall_thickness = 0.76
+wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -29,23 +29,21 @@ jerk_print = 25
 layer_height = 0.15
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_cool_down_speed = 0.5
-machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_amount = 7
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 2
+retraction_hop = 1.5
-retraction_hop_enabled = False
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -62,7 +60,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
-wall_thickness = 0.76
+wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -28,21 +28,19 @@ jerk_enabled = True
 jerk_print = 25
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_cool_down_speed = 0.5
-machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_heat_up_speed = 2.5
-material_final_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 2
+retraction_hop = 1.5
-retraction_hop_enabled = False
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -59,7 +57,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
-wall_thickness = 0.76
+wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 2
+name = Fast - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_cpe_plus_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+infill_before_walls = True
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = =default_material_print_temperature - 10
+material_print_temperature_layer_0 = =material_print_temperature
+retraction_combing = off
+retraction_hop = 0.1
+retraction_hop_enabled = False
+skin_overlap = 0
+speed_layer_0 = 15
+speed_print = 50
+speed_slowdown_layers = 15
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_z_distance = =layer_height
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5

resources/quality/ultimaker3/um3_aa0.8_CPEP_Not_Supported_Quality.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = normal
-material = generic_cpe_plus_ultimaker3_AA_0.8
-weight = 0
-supported = False
-setting_version = 1
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_CPEP_Not_Supported_Superdraft_Quality.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = superdraft
-material = generic_cpe_plus_ultimaker3_AA_0.8
-weight = 0
-supported = False
-setting_version = 1
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg

@@ -0,0 +1,38 @@
+[general]
+version = 2
+name = Sprint - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_cpe_plus_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
+infill_before_walls = True
+layer_height = 0.4
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =material_print_temperature
+prime_tower_enable = True
+retraction_combing = off
+retraction_hop = 0.1
+retraction_hop_enabled = False
+skin_overlap = 0
+speed_layer_0 = 15
+speed_print = 50
+speed_slowdown_layers = 8
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_z_distance = =layer_height
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5

resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg

@@ -0,0 +1,38 @@
+[general]
+version = 2
+name = Extra Fast - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_cpe_plus_ultimaker3_AA_0.8
+weight = -1
+setting_version = 1
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+infill_before_walls = True
+layer_height = 0.3
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = =default_material_print_temperature - 7
+material_print_temperature_layer_0 = =material_print_temperature
+prime_tower_enable = True
+retraction_combing = off
+retraction_hop = 0.1
+retraction_hop_enabled = False
+skin_overlap = 0
+speed_layer_0 = 15
+speed_print = 50
+speed_slowdown_layers = 10
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+support_z_distance = =layer_height
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5

resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 2
+name = Fast - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_pc_ultimaker3_AA_0.8
+weight = 0
+setting_version = 1
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+infill_before_walls = True
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =material_print_temperature
+raft_airgap = 0.5
+raft_margin = 15
+skin_overlap = 0
+speed_layer_0 = 15
+speed_print = 50
+speed_slowdown_layers = 15
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+travel_avoid_distance = 3

resources/quality/ultimaker3/um3_aa0.8_PC_Not_Supported_Quality.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-weight = 0
-type = quality
-quality_type = normal
-material = generic_pc_ultimaker3_AA_0.8
-supported = False
-setting_version = 1
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_PC_Not_Supported_Superdraft_Quality.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-weight = 0
-type = quality
-quality_type = superdraft
-material = generic_pc_ultimaker3_AA_0.8
-supported = False
-setting_version = 1
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 2
+name = Sprint - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_pc_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
+infill_before_walls = True
+layer_height = 0.4
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature_layer_0 = =material_print_temperature
+raft_airgap = 0.5
+raft_margin = 15
+skin_overlap = 0
+speed_layer_0 = 15
+speed_print = 50
+speed_slowdown_layers = 8
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+travel_avoid_distance = 3

resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 2
+name = Extra Fast - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_pc_ultimaker3_AA_0.8
+weight = -1
+setting_version = 1
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+infill_before_walls = True
+layer_height = 0.3
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =material_print_temperature
+raft_airgap = 0.5
+raft_margin = 15
+skin_overlap = 0
+speed_layer_0 = 15
+speed_print = 50
+speed_slowdown_layers = 10
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
+travel_avoid_distance = 3

resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg

@@ -0,0 +1,52 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_polypropylene_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+brim_width = 25
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+speed_travel = 300
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6

resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -0,0 +1,52 @@
+[general]
+version = 2
+name = Sprint
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_polypropylene_ultimaker3_AA_0.8
+weight = -4
+setting_version = 1
+
+[values]
+brim_width = 25
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+speed_travel = 300
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6

resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -0,0 +1,52 @@
+[general]
+version = 2
+name = Extra Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_polypropylene_ultimaker3_AA_0.8
+weight = -3
+setting_version = 1
+
+[values]
+brim_width = 25
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+layer_height = 0.3
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+speed_travel = 300
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -25,11 +25,14 @@ infill_sparse_density = 80
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
 material_bed_temperature_layer_0 = 0
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -37,8 +40,7 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
-retraction_hop = 0.5
+retraction_hop = 1.5
-retraction_hop_enabled = False
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -56,9 +58,8 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
-wall_thickness = 1.3
+wall_thickness = 1.3
-

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -26,11 +26,14 @@ jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.4
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
 material_bed_temperature_layer_0 = 0
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,8 +41,7 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
-retraction_hop = 0.5
+retraction_hop = 1.5
-retraction_hop_enabled = False
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -57,9 +59,8 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
-wall_thickness = 1.3
+wall_thickness = 1.3
-

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -26,10 +26,13 @@ jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
 material_bed_temperature_layer_0 = 0
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -37,8 +40,7 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
-retraction_hop = 0.5
+retraction_hop = 1.5
-retraction_hop_enabled = False
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -56,9 +58,8 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
-wall_thickness = 1.3
+wall_thickness = 1.3
-