mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-15 14:25:55 +08:00
Adding Sketch Sprint MPLA intents
*Visual (Fast) -0.2 Layer Height with the same roof settings as PLA Visual (released in Cura 5.10) -Added a scarf seam to resolve single wall Z seam gap, and included the scarf settings in PLA and TPLA Visual intent profiles *Draft (Extra Fast) -0.27 Layer Height with the same acceleration settings as PLA Draft (released in Cura 5.10) -Alterations to the print speed parameters to ensure the flow rate does not exceed 12 mm^3/s * Balanced (Extra Fast) -I had to include this profile to allow the Draft intent at 0.27 layer height. Its low risk, but not heavily tested. All of the flow rates are within the limit for MPLA.
This commit is contained in:
Alan Bjorklund
parent
a90b7fb59b
commit
62517c30d0
@ -50,10 +50,10 @@
|
||||
"ultimaker_asa",
|
||||
"ultimaker_abs",
|
||||
"ultimaker_nylon",
|
||||
"ultimaker_pet",
|
||||
"ultimaker_pva",
|
||||
"ultimaker_rapidrinse",
|
||||
"ultimaker_sr30",
|
||||
"ultimaker_petg",
|
||||
"ultimaker_pc-abs",
|
||||
"ultimaker_pc-abs-fr"
|
||||
],
|
||||
@ -95,6 +95,7 @@
|
||||
"acceleration_wall_x_roofing": { "value": "acceleration_wall * 2/5" },
|
||||
"adhesion_type": { "value": "'none'" },
|
||||
"bottom_layers": { "value": 3 },
|
||||
"bridge_fan_speed": { "value": 100 },
|
||||
"bridge_skin_density": { "value": 100 },
|
||||
"bridge_skin_density_2": { "value": 75 },
|
||||
"bridge_skin_density_3": { "value": 80 },
|
||||
@ -118,7 +119,7 @@
|
||||
"default_material_print_temperature":
|
||||
{
|
||||
"maximum_value": 280,
|
||||
"maximum_value_warning": 240
|
||||
"maximum_value_warning": 265
|
||||
},
|
||||
"gantry_height": { "value": 27.5 },
|
||||
"gradual_infill_steps": { "value": 0 },
|
||||
@ -144,7 +145,7 @@
|
||||
"value": false
|
||||
},
|
||||
"jerk_travel_enabled": { "enabled": false },
|
||||
"layer_height_0": { "value": "layer_height if adhesion_type == 'raft' else layer_height * 1.25" },
|
||||
"layer_height_0": { "value": "layer_height if adhesion_type == 'raft' or layer_height > 0.2 else layer_height * 1.25" },
|
||||
"line_width": { "value": 0.42 },
|
||||
"machine_center_is_zero": { "default_value": true },
|
||||
"machine_depth": { "default_value": 221.5 },
|
||||
@ -175,8 +176,8 @@
|
||||
"material_flow": { "default_value": 100 },
|
||||
"material_print_temperature":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 240
|
||||
"maximum_value": 280,
|
||||
"maximum_value_warning": 265
|
||||
},
|
||||
"min_bead_width": { "value": 0.3 },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
@ -397,6 +398,8 @@
|
||||
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
|
||||
"z_seam_position": { "value": "'backleft'" },
|
||||
"z_seam_type": { "value": "'sharpest_corner'" },
|
||||
"z_seam_x": { "value": 150 },
|
||||
"z_seam_y": { "value": 180 },
|
||||
"zig_zaggify_infill": { "value": true }
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,56 @@
|
||||
[general]
|
||||
definition = ultimaker_sketch_sprint
|
||||
name = Draft
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = draft
|
||||
is_experimental = True
|
||||
material = ultimaker_metallic_pla_175
|
||||
quality_type = imperial
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 0.4mm
|
||||
|
||||
[values]
|
||||
acceleration_layer_0 = 5000
|
||||
acceleration_print = 20000
|
||||
acceleration_roofing = 5000
|
||||
acceleration_topbottom = 10000
|
||||
acceleration_travel_layer_0 = 5000
|
||||
acceleration_wall_0 = 5000.0
|
||||
acceleration_wall_0_roofing = 5000
|
||||
acceleration_wall_x = 10000
|
||||
acceleration_wall_x_roofing = 5000
|
||||
cool_fan_full_at_height = 0.54
|
||||
cool_min_layer_time = 2
|
||||
cool_min_speed = 50
|
||||
cool_min_temperature = 220
|
||||
infill_angles = [135]
|
||||
infill_line_width = 0.4
|
||||
infill_overlap = 25
|
||||
infill_pattern = zigzag
|
||||
infill_wipe_dist = 0.05
|
||||
initial_layer_line_width_factor = 125
|
||||
layer_height_0 = =layer_height
|
||||
line_width = 0.4
|
||||
material_final_print_temperature = 225
|
||||
material_initial_print_temperature = 225
|
||||
material_print_temperature = 230
|
||||
retraction_hop_enabled = True
|
||||
seam_overhang_angle = 25
|
||||
speed_layer_0 = 50
|
||||
speed_print = 110
|
||||
speed_roofing = 100
|
||||
speed_support_bottom = 90
|
||||
speed_support_interface = 110
|
||||
speed_topbottom = =speed_roofing
|
||||
speed_wall = 100
|
||||
speed_wall_0 = 90
|
||||
speed_wall_x = =speed_wall
|
||||
speed_wall_x_roofing = =speed_wall
|
||||
support_line_width = 0.35
|
||||
wall_line_width_x = 0.4
|
||||
wall_overhang_angle = 25
|
||||
wall_overhang_speed_factors = [15]
|
||||
|
||||
@ -0,0 +1,45 @@
|
||||
[general]
|
||||
definition = ultimaker_sketch_sprint
|
||||
name = Visual
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = visual
|
||||
is_experimental = True
|
||||
material = ultimaker_metallic_pla_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 0.4mm
|
||||
|
||||
[values]
|
||||
acceleration_roofing = 1500
|
||||
acceleration_wall_0_roofing = 1500
|
||||
acceleration_wall_x_roofing = 1500
|
||||
cool_min_temperature = =material_print_temperature
|
||||
hole_xy_offset = 0.2
|
||||
hole_xy_offset_max_diameter = 3
|
||||
inset_direction = inside_out
|
||||
line_width = 0.4
|
||||
material_final_print_temperature = =material_print_temperature
|
||||
material_initial_print_temperature = =material_print_temperature
|
||||
material_print_temperature = 230
|
||||
min_bead_width = 0.34
|
||||
min_wall_line_width = 0.34
|
||||
roofing_line_width = 0.35
|
||||
roofing_monotonic = False
|
||||
roofing_pattern = lines
|
||||
scarf_joint_seam_length = 3
|
||||
scarf_joint_seam_start_height_ratio = 25
|
||||
scarf_split_distance = 0.1
|
||||
skin_monotonic = False
|
||||
skin_outline_count = 0
|
||||
skin_overlap = 25
|
||||
small_feature_max_length = 25
|
||||
small_feature_speed_factor = 40
|
||||
small_hole_max_size = 4.5
|
||||
small_skin_width = 4
|
||||
speed_roofing = 100
|
||||
wall_line_width_x = 0.4
|
||||
z_seam_type = back
|
||||
|
||||
@ -32,6 +32,7 @@ infill_overlap = 25
|
||||
infill_pattern = zigzag
|
||||
infill_wipe_dist = 0.05
|
||||
initial_layer_line_width_factor = 125
|
||||
layer_height_0 = =layer_height
|
||||
line_width = 0.4
|
||||
material_final_print_temperature = 225
|
||||
material_initial_print_temperature = 225
|
||||
@ -45,6 +46,7 @@ speed_support_bottom = 100
|
||||
speed_support_interface = 215
|
||||
speed_topbottom = 215
|
||||
speed_wall = 215
|
||||
speed_wall_0 = 90
|
||||
speed_wall_x = 270
|
||||
speed_wall_x_roofing = 270
|
||||
support_line_width = 0.35
|
||||
|
||||
@ -16,7 +16,7 @@ variant = 0.4mm
|
||||
acceleration_roofing = 1500
|
||||
acceleration_wall_0_roofing = 1500
|
||||
acceleration_wall_x_roofing = 1500
|
||||
cool_min_temperature = 220.0
|
||||
cool_min_temperature = =material_print_temperature
|
||||
hole_xy_offset = 0.2
|
||||
hole_xy_offset_max_diameter = 3
|
||||
inset_direction = inside_out
|
||||
@ -29,6 +29,9 @@ min_wall_line_width = 0.34
|
||||
roofing_line_width = 0.35
|
||||
roofing_monotonic = False
|
||||
roofing_pattern = lines
|
||||
scarf_joint_seam_length = 3
|
||||
scarf_joint_seam_start_height_ratio = 25
|
||||
scarf_split_distance = 0.1
|
||||
skin_monotonic = False
|
||||
skin_outline_count = 0
|
||||
skin_overlap = 25
|
||||
|
||||
@ -32,6 +32,7 @@ infill_overlap = 25
|
||||
infill_pattern = zigzag
|
||||
infill_wipe_dist = 0.05
|
||||
initial_layer_line_width_factor = 125
|
||||
layer_height_0 = =layer_height
|
||||
line_width = 0.4
|
||||
material_final_print_temperature = 225
|
||||
material_initial_print_temperature = 225
|
||||
@ -45,6 +46,7 @@ speed_support_bottom = 100
|
||||
speed_support_interface = 215
|
||||
speed_topbottom = 215
|
||||
speed_wall = 215
|
||||
speed_wall_0 = 90
|
||||
speed_wall_x = 270
|
||||
speed_wall_x_roofing = 270
|
||||
support_line_width = 0.35
|
||||
|
||||
@ -16,7 +16,7 @@ variant = 0.4mm
|
||||
acceleration_roofing = 1500
|
||||
acceleration_wall_0_roofing = 1500
|
||||
acceleration_wall_x_roofing = 1500
|
||||
cool_min_temperature = 220.0
|
||||
cool_min_temperature = =material_print_temperature
|
||||
hole_xy_offset = 0.2
|
||||
hole_xy_offset_max_diameter = 3
|
||||
inset_direction = inside_out
|
||||
@ -29,6 +29,9 @@ min_wall_line_width = 0.34
|
||||
roofing_line_width = 0.35
|
||||
roofing_monotonic = False
|
||||
roofing_pattern = lines
|
||||
scarf_joint_seam_length = 3
|
||||
scarf_joint_seam_start_height_ratio = 25
|
||||
scarf_split_distance = 0.1
|
||||
skin_monotonic = False
|
||||
skin_outline_count = 0
|
||||
skin_overlap = 25
|
||||
|
||||
@ -0,0 +1,31 @@
|
||||
[general]
|
||||
definition = ultimaker_sketch_sprint
|
||||
name = Extra Fast - Experimental
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
is_experimental = True
|
||||
material = ultimaker_metallic_pla_175
|
||||
quality_type = imperial
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = 0.4mm
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
cool_min_temperature = 230
|
||||
infill_angles = [45,45,45,45,45,135,135,135,135,135]
|
||||
infill_line_width = 0.42
|
||||
material_final_print_temperature = 230
|
||||
material_initial_print_temperature = 230
|
||||
speed_print = 103
|
||||
speed_roofing = 75
|
||||
speed_support_bottom = 90
|
||||
speed_support_interface = 90
|
||||
speed_topbottom = 90
|
||||
speed_wall_x = 100
|
||||
support_material_flow = 92
|
||||
wall_line_width = 0.4
|
||||
wall_line_width_x = =wall_line_width
|
||||
wall_overhang_speed_factors = [23]
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user