diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_A.inst.cfg index d930b03af1..4c56a210fc 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_A.inst.cfg @@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_B.inst.cfg index 54281ae273..bcaf489224 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_B.inst.cfg @@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 15 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = ==line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_C.inst.cfg index 84eb14acbe..d27d5f0ff4 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_C.inst.cfg @@ -28,7 +28,7 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 19 * layer_height +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 @@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 20 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg index 19d8247456..b1ad5d72ab 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg @@ -28,20 +28,22 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height cool_min_speed = 10 -support_angle = 65 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg index 44e5609b3f..822399fef6 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg @@ -28,20 +28,22 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 15 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg index b4cc317f50..acad5e33e4 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg @@ -33,15 +33,17 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 20 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg index eb8bd0a020..503767b332 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg @@ -28,20 +28,22 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height cool_min_speed = 10 -support_angle = 65 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg index a25f57b3e7..5b366651af 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg @@ -28,20 +28,22 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 15 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = ==line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg index 6222d946e0..36080febc5 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg @@ -33,15 +33,17 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 20 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg index 774a985511..633356b41a 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg @@ -28,20 +28,22 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height cool_min_speed = 10 -support_angle = 65 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg index 72429d945b..3dc67389b3 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg @@ -28,20 +28,22 @@ cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 15 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = ==line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg index 09c540498e..94d1f14c09 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg @@ -33,15 +33,17 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 95 +material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 20 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width*3/4 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_B.inst.cfg index 00fbeff14b..2e417e008c 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_B.inst.cfg @@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 -support_angle = 50 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 95 @@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_C.inst.cfg index 6b3d39b7ca..166e075a56 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_C.inst.cfg @@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 -support_angle = 50 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 95 @@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_D.inst.cfg index 72ae576a80..69681ea613 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_D.inst.cfg @@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 -support_angle = 50 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 95 @@ -38,10 +38,12 @@ retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg index 05ae1383eb..26f0c64071 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg @@ -30,19 +30,21 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg index 7507968a69..6aec7956b8 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg @@ -33,16 +33,18 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg index ea68f30f33..852fbb8e0b 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg @@ -30,19 +30,21 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 50 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg index 915e0f3b83..4b3a6c1b6e 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg @@ -30,19 +30,21 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg index b9c260eb2c..1bfeb7b1b9 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg @@ -33,16 +33,18 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg index 7e1237eb55..6deb9705ba 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg @@ -30,19 +30,21 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 50 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg index f5fed6dc2e..0758a59309 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg @@ -30,19 +30,21 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg index 033c0e03bd..612b7a2af2 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg @@ -33,16 +33,18 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg index 9e457f7d73..39371d86e8 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg @@ -30,19 +30,21 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 50 +support_angle = 55 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 +material_flow = 95 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 10 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width -support_offset = 2.5 +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 +support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg index bf649d61ef..e431ca45db 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg @@ -13,14 +13,13 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 -speed_wall = =math.ceil(speed_print * 40/50) -speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 30/37) speed_topbottom = =math.ceil(speed_print * 35/50) speed_layer_0 = =math.ceil(speed_print * 25/50) speed_slowdown_layers = 2 @@ -34,13 +33,13 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_flow = 97 +retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 -support_z_distance = =layer_height*2 -support_bottom_distance = =support_z_distance*0.5 +support_z_distance = =layer_height +support_bottom_distance = =layer_height support_xy_distance = =line_width * 2 support_xy_distance_overhang = =wall_line_width_0 support_offset = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg index 55d6d20323..6f0970cd5d 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg @@ -13,14 +13,13 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 -speed_wall = =math.ceil(speed_print * 40/50) -speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 30/37) speed_topbottom = =math.ceil(speed_print * 35/50) speed_layer_0 = =math.ceil(speed_print * 25/50) speed_slowdown_layers = 2 @@ -33,14 +32,14 @@ cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 50 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 96 +retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 -support_z_distance = =layer_height*2 -support_bottom_distance = =support_z_distance*0.5 +support_z_distance = =layer_height +support_bottom_distance = =layer_height support_xy_distance = =line_width * 2 support_xy_distance_overhang = =wall_line_width_0 support_offset = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg index 8c3215ebc1..52892f97e0 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg @@ -13,14 +13,13 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 -speed_wall = =math.ceil(speed_print * 40/50) -speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 30/37) speed_topbottom = =math.ceil(speed_print * 35/50) speed_layer_0 = =math.ceil(speed_print * 25/50) speed_slowdown_layers = 2 @@ -34,13 +33,13 @@ cool_min_speed = 10 support_angle = 45 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_flow = 95 +retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 -support_z_distance = =layer_height*2 -support_bottom_distance = =support_z_distance*0.5 +support_z_distance = =layer_height +support_bottom_distance = =layer_height support_xy_distance = =line_width * 2 support_xy_distance_overhang = =wall_line_width_0 support_offset = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg index 4a12fffb1e..926096a7d9 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.75 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 speed_wall = =math.ceil(speed_print * 40/50) @@ -25,17 +24,17 @@ speed_topbottom = =math.ceil(speed_print * 35/50) speed_layer_0 = =math.ceil(speed_print * 25/50) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0 +material_flow = 97 +retraction_extra_prime_amount = 0.4 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg index a5f01107f8..b43eeb7864 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.75 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 speed_wall = =math.ceil(speed_print * 40/50) @@ -25,7 +24,7 @@ speed_topbottom = =math.ceil(speed_print * 35/50) speed_layer_0 = =math.ceil(speed_print * 25/50) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 @@ -33,9 +32,9 @@ cool_fan_full_at_height = =layer_height_0 + 3 * layer_height cool_min_speed = 10 support_angle = 50 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 95 +retraction_extra_prime_amount = 0.4 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg index 6042de9501..4191e2723e 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.75 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 speed_wall = =math.ceil(speed_print * 40/50) @@ -25,7 +24,7 @@ speed_topbottom = =math.ceil(speed_print * 35/50) speed_layer_0 = =math.ceil(speed_print * 25/50) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 @@ -35,7 +34,7 @@ support_angle = 45 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 material_flow = 93 -retraction_extra_prime_amount = 0 +retraction_extra_prime_amount = 0.4 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg index 405bc3db13..27979f443a 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.75 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 speed_wall = =math.ceil(speed_print * 40/50) @@ -31,11 +30,11 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 10 -support_angle = 60 -material_print_temperature = =default_material_print_temperature +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_flow = 99 +retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg index b52bd3e5a1..871243e0fd 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.75 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 speed_wall = =math.ceil(speed_print * 40/50) @@ -32,10 +31,10 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 10 support_angle = 50 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +3 -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_print_temperature = =default_material_print_temperature + 7 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 98 +retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg index 8b65fa78bd..39a61933c3 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.75 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 speed_wall = =math.ceil(speed_print * 40/50) @@ -33,9 +32,9 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_min_speed = 10 support_angle = 45 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =default_material_print_temperature +5 -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 97 +retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_hop_only_when_collides = True skin_overlap = 5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg index 5cf1c2c5a9..0736de0994 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.8 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 40 speed_wall = =math.ceil(speed_print * 30/40) @@ -31,18 +30,20 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 60 +support_angle = 55 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_flow = 97 +retraction_extra_prime_amount = 0.3 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 5 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 2 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg index e514ce8425..971fe5f76c 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.8 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 40 speed_wall = =math.ceil(speed_print * 30/40) @@ -31,18 +30,20 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 50 -material_print_temperature = =default_material_print_temperature +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_flow = 97 +retraction_extra_prime_amount = 0.3 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 5 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 2 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg index 883c733088..6994af0705 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.8 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 40 speed_wall = =math.ceil(speed_print * 30/40) @@ -31,18 +30,20 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 -support_angle = 45 -material_print_temperature = =default_material_print_temperature +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 93 -retraction_extra_prime_amount = 0.1 +material_flow = 97 +retraction_extra_prime_amount = 0.3 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 5 +support_bottom_stair_step_height = 0 +support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance -support_xy_distance = =line_width * 0.75 -support_xy_distance_overhang = =line_width*0.175/line_width +support_xy_distance = =line_width * 0.5 +support_xy_distance_overhang = =line_width*0 support_offset = 2 support_pattern = grid support_interface_density = 100 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg index b7ec8a65db..5a0bf18760 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.5*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.8 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 wall_0_wipe_dist = =machine_nozzle_size speed_print = 35 speed_wall = =math.ceil(speed_print * 35/35) diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg index fcea53fbe5..687afee84e 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.8 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 wall_0_wipe_dist = =machine_nozzle_size speed_print = 35 speed_wall = =math.ceil(speed_print * 35/35) diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg index 61a455827c..034a7e0db4 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg @@ -13,10 +13,9 @@ variant = Standard 0.8 [values] layer_height_0 = =round(0.75*machine_nozzle_size, 2) -line_width = =machine_nozzle_size/machine_nozzle_size*0.8 -wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 -infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 -support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 wall_0_wipe_dist = =machine_nozzle_size speed_print = 35 speed_wall = =math.ceil(speed_print * 35/35) diff --git a/resources/variants/strateo3d_standard_08.inst.cfg b/resources/variants/strateo3d_standard_08.inst.cfg new file mode 100644 index 0000000000..5198f7d1db --- /dev/null +++ b/resources/variants/strateo3d_standard_08.inst.cfg @@ -0,0 +1,20 @@ +[general] +name = Standard 0.8 +version = 4 +definition = strateo3d + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_id = Standard 0.8 +machine_nozzle_size = 0.8 +machine_nozzle_tip_outer_diameter = 2.0 +layer_height = 0.4 +layer_height_0 = 0.5 +prime_tower_enable = True +retract_at_layer_change = True +support_angle = 50 +support_use_towers = True \ No newline at end of file