diff --git a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile
index 04142da2e7..263e730a97 100644
--- a/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile
@@ -6,42 +6,24 @@ machine_variant = 0.25 mm
 material = ABS
 
 [settings]
-raft_surface_thickness = 0.27
-raft_base_line_width = 1.0
-raft_margin = 5.0
-cool_min_layer_time = 2
-support_enable = False
-cool_min_speed = 25
-brim_line_count = 32
-top_thickness = 0.72
-material_flow = 100.0
-cool_lift_head = True
-speed_print = 20
-machine_nozzle_size = 0.22
 layer_height = 0.06
-speed_wall_0 = 20
-raft_interface_line_spacing = 3.0
-speed_topbottom = 20
-speed_infill = 30
-infill_before_walls = False
-retraction_speed = 40.0
-infill_sparse_density = 22
-shell_thickness = 0.88
-cool_fan_speed_max = 100
-raft_airgap = 0.0
-material_bed_temperature = 70
-infill_overlap = 15
-speed_wall_x = 25
-skirt_minimal_length = 150.0
-speed_layer_0 = 20
-bottom_thickness = 0.72
-layer_height_0 = 0.15
-cool_fan_speed_min = 50
 top_bottom_thickness = 0.72
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
+layer_height_0 = 0.15
+brim_line_count = 32
+speed_wall_x = 25
+wall_thickness = 0.88
+speed_infill = 30
+speed_topbottom = 20
 adhesion_type = brim
-support_pattern = lines
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
+speed_print = 20
+cool_min_speed = 25
+line_width = 0.22
+infill_sparse_density = 22
+bottom_thickness = 0.72
+machine_nozzle_size = 0.22
+top_thickness = 0.72
+speed_wall_0 = 20
+cool_min_layer_time = 2
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile
index b92bb4ee20..3361af5fdd 100644
--- a/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile
+++ b/resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile
@@ -6,42 +6,24 @@ machine_variant = 0.4 mm
 material = ABS
 
 [settings]
-raft_surface_thickness = 0.27
-raft_base_line_width = 1.0
-raft_margin = 5.0
-cool_min_layer_time = 3
-support_enable = False
-speed_travel = 150
-cool_min_speed = 20
-brim_line_count = 20
-top_thickness = 0.75
-material_flow = 100.0
-cool_lift_head = True
-speed_print = 40
-machine_nozzle_size = 0.35
 layer_height = 0.15
-speed_wall_0 = 30
-raft_interface_line_spacing = 3.0
-speed_topbottom = 30
-speed_infill = 55
-infill_before_walls = False
-retraction_speed = 40.0
-infill_sparse_density = 18
-shell_thickness = 0.7
-cool_fan_speed_max = 100
-raft_airgap = 0.0
-material_bed_temperature = 70
-infill_overlap = 15
-speed_wall_x = 40
-skirt_minimal_length = 150.0
-bottom_thickness = 0.75
-layer_height_0 = 0.26
-cool_fan_speed_min = 50
 top_bottom_thickness = 0.75
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
+layer_height_0 = 0.26
+speed_print = 40
+speed_wall_x = 40
+wall_thickness = 0.7
+speed_infill = 55
+speed_topbottom = 30
+cool_min_layer_time = 3
+bottom_thickness = 0.75
+cool_min_speed = 20
+line_width = 0.35
+infill_sparse_density = 18
+top_thickness = 0.75
+machine_nozzle_size = 0.35
+speed_travel = 150
+speed_wall_0 = 30
 adhesion_type = brim
-support_pattern = lines
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile
index 1b1ae523b1..edc46ab0fa 100644
--- a/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile
+++ b/resources/profiles/ultimaker2+/abs_0.4_high.curaprofile
@@ -6,42 +6,23 @@ machine_variant = 0.4 mm
 material = ABS
 
 [settings]
-raft_surface_thickness = 0.27
-raft_base_line_width = 1.0
-raft_margin = 5.0
-cool_min_layer_time = 3
-support_enable = False
-cool_min_speed = 20
-brim_line_count = 20
-top_thickness = 0.72
-material_flow = 100.0
-cool_lift_head = True
-speed_print = 30
-machine_nozzle_size = 0.35
 layer_height = 0.06
-speed_wall_0 = 20
-raft_interface_line_spacing = 3.0
-speed_topbottom = 20
-speed_infill = 45
-infill_before_walls = False
-retraction_speed = 40.0
-infill_sparse_density = 22
-shell_thickness = 1.05
-cool_fan_speed_max = 100
-raft_airgap = 0.0
-material_bed_temperature = 70
-infill_overlap = 15
-speed_wall_x = 30
-skirt_minimal_length = 150.0
-speed_layer_0 = 20
-bottom_thickness = 0.72
-layer_height_0 = 0.26
-cool_fan_speed_min = 50
 top_bottom_thickness = 0.72
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
+layer_height_0 = 0.26
+speed_print = 30
+speed_wall_x = 30
+wall_thickness = 1.05
+speed_infill = 45
+speed_topbottom = 20
 adhesion_type = brim
-support_pattern = lines
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
+cool_min_speed = 20
+line_width = 0.35
+infill_sparse_density = 22
+bottom_thickness = 0.72
+machine_nozzle_size = 0.35
+top_thickness = 0.72
+speed_wall_0 = 20
+cool_min_layer_time = 3
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile
index 99f5dc61c3..a8d63d07db 100644
--- a/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile
@@ -6,38 +6,18 @@ machine_variant = 0.4 mm
 material = ABS
 
 [settings]
-raft_surface_thickness = 0.27
-raft_base_line_width = 1.0
-raft_margin = 5.0
-support_enable = False
-
-cool_min_speed = 20
-brim_line_count = 20
-material_flow = 100.0
-cool_lift_head = True
+layer_height_0 = 0.26
 speed_print = 30
+speed_wall_x = 30
+wall_thickness = 1.05
+speed_infill = 45
+speed_topbottom = 20
+cool_min_layer_time = 3
+cool_min_speed = 20
+line_width = 0.35
 machine_nozzle_size = 0.35
 speed_wall_0 = 20
-raft_interface_line_spacing = 3.0
-speed_topbottom = 20
-speed_infill = 45
-infill_before_walls = False
-retraction_speed = 40.0
-shell_thickness = 1.05
-cool_fan_speed_max = 100
-raft_airgap = 0.0
-material_bed_temperature = 70
-infill_overlap = 15
-speed_wall_x = 30
-skirt_minimal_length = 150.0
-speed_layer_0 = 20
-layer_height_0 = 0.26
-cool_fan_speed_min = 50
-cool_min_layer_time = 3
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
 adhesion_type = brim
-support_pattern = lines
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile
index d8c4b0fcb2..8b905b14e6 100644
--- a/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile
@@ -6,41 +6,23 @@ machine_variant = 0.6 mm
 material = ABS
 
 [settings]
-raft_surface_thickness = 0.27
-raft_base_line_width = 1.0
-raft_margin = 5.0
-cool_min_layer_time = 3
-support_enable = False
-cool_min_speed = 20
-brim_line_count = 14
-top_thickness = 1.2
-material_flow = 100.0
-cool_lift_head = True
-speed_print = 25
-machine_nozzle_size = 0.53
 layer_height = 0.15
-speed_wall_0 = 20
-raft_interface_line_spacing = 3.0
-speed_topbottom = 20
-speed_infill = 55
-infill_before_walls = False
-retraction_speed = 40.0
-shell_thickness = 1.59
-cool_fan_speed_max = 100
-raft_airgap = 0.0
-material_bed_temperature = 70
-infill_overlap = 15
-speed_wall_x = 30
-skirt_minimal_length = 150.0
-speed_layer_0 = 20
-bottom_thickness = 1.2
-layer_height_0 = 0.39
-cool_fan_speed_min = 50
 top_bottom_thickness = 1.2
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
+layer_height_0 = 0.39
+speed_print = 25
+speed_wall_x = 30
+wall_thickness = 1.59
+speed_infill = 55
+speed_topbottom = 20
 adhesion_type = brim
-support_pattern = lines
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
+brim_line_count = 14
+cool_min_speed = 20
+line_width = 0.53
+bottom_thickness = 1.2
+machine_nozzle_size = 0.53
+top_thickness = 1.2
+speed_wall_0 = 20
+cool_min_layer_time = 3
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile
index ce235a43c5..25a6ccdc6e 100644
--- a/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile
@@ -6,41 +6,23 @@ machine_variant = 0.8 mm
 material = ABS
 
 [settings]
-raft_surface_thickness = 0.27
-raft_base_line_width = 1.0
-raft_margin = 5.0
-cool_min_layer_time = 3
-support_enable = False
-cool_min_speed = 15
-brim_line_count = 10
-top_thickness = 1.2
-material_flow = 100.0
-cool_lift_head = True
-speed_print = 20
-machine_nozzle_size = 0.7
 layer_height = 0.2
-speed_wall_0 = 20
-raft_interface_line_spacing = 3.0
-speed_topbottom = 20
-speed_infill = 40
-infill_before_walls = False
-retraction_speed = 40.0
-shell_thickness = 2.1
-cool_fan_speed_max = 100
-raft_airgap = 0.0
-material_bed_temperature = 70
-infill_overlap = 15
-speed_wall_x = 30
-skirt_minimal_length = 150.0
-speed_layer_0 = 20
-bottom_thickness = 1.2
-layer_height_0 = 0.5
-cool_fan_speed_min = 50
 top_bottom_thickness = 1.2
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
+layer_height_0 = 0.5
+speed_print = 20
+speed_wall_x = 30
+wall_thickness = 2.1
+speed_infill = 40
+speed_topbottom = 20
 adhesion_type = brim
-support_pattern = lines
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
+brim_line_count = 10
+cool_min_speed = 15
+line_width = 0.7
+bottom_thickness = 1.2
+machine_nozzle_size = 0.7
+top_thickness = 1.2
+speed_wall_0 = 20
+cool_min_layer_time = 3
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile
index 1031f6ad19..6664aa4436 100644
--- a/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile
@@ -6,41 +6,24 @@ machine_variant = 0.25 mm
 material = CPE
 
 [settings]
-cool_fan_speed_min = 50
-support_enable = False
-raft_airgap = 0.0
-raft_surface_thickness = 0.27
-raft_interface_line_spacing = 3.0
-bottom_thickness = 0.72
-raft_surface_line_spacing = 3.0
-adhesion_type = brim
-cool_min_layer_time = 2
-layer_height = 0.06
-raft_margin = 5.0
-speed_infill = 30
-speed_layer_0 = 20
-brim_line_count = 32
-cool_lift_head = True
-retraction_speed = 40.0
-cool_fan_speed_max = 100
-speed_print = 20
-shell_thickness = 0.88
-speed_wall_0 = 20
-material_flow = 100.0
-support_pattern = lines
-infill_sparse_density = 22
-raft_interface_line_width = 0.4
-layer_height_0 = 0.15
-material_bed_temperature = 70
-top_thickness = 0.72
-top_bottom_thickness = 0.72
-speed_wall_x = 25
 infill_overlap = 17
-infill_before_walls = False
-raft_surface_line_width = 0.4
-skirt_minimal_length = 150.0
+layer_height = 0.06
+wall_thickness = 0.88
+layer_height_0 = 0.15
+brim_line_count = 32
+speed_wall_x = 25
+top_bottom_thickness = 0.72
+speed_infill = 30
 speed_topbottom = 20
-skirt_gap = 3.0
-raft_base_line_width = 1.0
+cool_min_layer_time = 2
+speed_print = 20
+line_width = 0.22
+infill_sparse_density = 22
+bottom_thickness = 0.72
 machine_nozzle_size = 0.22
+top_thickness = 0.72
+speed_wall_0 = 20
+adhesion_type = brim
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile
index f2cae02169..41efd0a42b 100644
--- a/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile
+++ b/resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile
@@ -6,41 +6,24 @@ machine_variant = 0.4 mm
 material = CPE
 
 [settings]
-cool_fan_speed_min = 50
-raft_airgap = 0.0
-speed_travel = 150
-raft_surface_thickness = 0.27
-raft_interface_line_spacing = 3.0
-support_enable = False
-raft_surface_line_width = 0.4
-raft_surface_line_spacing = 3.0
-adhesion_type = brim
+infill_overlap = 17
 cool_min_layer_time = 3
 layer_height = 0.15
-raft_margin = 5.0
-speed_infill = 45
-bottom_thickness = 0.75
-brim_line_count = 20
-cool_lift_head = True
-retraction_speed = 40.0
-cool_fan_speed_max = 100
-speed_print = 30
-shell_thickness = 0.7
-speed_wall_0 = 30
-material_flow = 100.0
-support_pattern = lines
-infill_sparse_density = 18
-raft_interface_line_width = 0.4
+wall_thickness = 0.7
 layer_height_0 = 0.26
-material_bed_temperature = 70
-top_thickness = 0.75
-top_bottom_thickness = 0.75
+speed_print = 30
 speed_wall_x = 40
-infill_overlap = 17
-infill_before_walls = False
-skirt_minimal_length = 150.0
+top_bottom_thickness = 0.75
+speed_infill = 45
 speed_topbottom = 20
-skirt_gap = 3.0
-raft_base_line_width = 1.0
+speed_travel = 150
+line_width = 0.35
+infill_sparse_density = 18
+bottom_thickness = 0.75
 machine_nozzle_size = 0.35
+top_thickness = 0.75
+speed_wall_0 = 30
+adhesion_type = brim
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile
index 1b1688e089..8b8684522b 100644
--- a/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile
+++ b/resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile
@@ -6,41 +6,22 @@ machine_variant = 0.4 mm
 material = CPE
 
 [settings]
-cool_fan_speed_min = 50
-support_enable = False
-raft_airgap = 0.0
-raft_surface_thickness = 0.27
-raft_interface_line_spacing = 3.0
-bottom_thickness = 0.72
-raft_surface_line_spacing = 3.0
-adhesion_type = brim
-cool_min_layer_time = 3
 layer_height = 0.06
-raft_margin = 5.0
-speed_infill = 45
-speed_layer_0 = 20
-brim_line_count = 20
-cool_lift_head = True
-retraction_speed = 40.0
-cool_fan_speed_max = 100
-speed_print = 20
-shell_thickness = 1.05
-speed_wall_0 = 20
-material_flow = 100.0
-support_pattern = lines
-infill_sparse_density = 22
-raft_interface_line_width = 0.4
-layer_height_0 = 0.26
-material_bed_temperature = 70
-top_thickness = 0.72
 top_bottom_thickness = 0.72
+layer_height_0 = 0.26
+speed_print = 20
 speed_wall_x = 30
-infill_overlap = 15
-infill_before_walls = False
-raft_surface_line_width = 0.4
-skirt_minimal_length = 150.0
+wall_thickness = 1.05
+speed_infill = 45
 speed_topbottom = 20
-skirt_gap = 3.0
-raft_base_line_width = 1.0
+adhesion_type = brim
+line_width = 0.35
+infill_sparse_density = 22
+bottom_thickness = 0.72
 machine_nozzle_size = 0.35
+top_thickness = 0.72
+speed_wall_0 = 20
+cool_min_layer_time = 3
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile
index be166f6384..ae721733e5 100644
--- a/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile
@@ -6,36 +6,17 @@ machine_variant = 0.4 mm
 material = CPE
 
 [settings]
-support_enable = False
-raft_airgap = 0.0
-raft_surface_thickness = 0.27
-support_pattern = lines
-raft_interface_line_spacing = 3.0
-raft_surface_line_width = 0.4
-cool_fan_speed_min = 50
-adhesion_type = brim
-cool_min_layer_time = 3
-infill_before_walls = False
-speed_layer_0 = 20
-brim_line_count = 20
-cool_lift_head = True
-raft_interface_line_width = 0.4
-cool_fan_speed_max = 100
-speed_print = 20
-shell_thickness = 1.05
-speed_wall_0 = 20
-material_flow = 100.0
-raft_surface_line_spacing = 3.0
-raft_margin = 5.0
-retraction_speed = 40.0
 layer_height_0 = 0.26
-material_bed_temperature = 70
+speed_print = 20
 speed_wall_x = 30
-infill_overlap = 15
+wall_thickness = 1.05
 speed_infill = 45
-skirt_minimal_length = 150.0
 speed_topbottom = 20
-skirt_gap = 3.0
-raft_base_line_width = 1.0
+cool_min_layer_time = 3
+line_width = 0.35
 machine_nozzle_size = 0.35
+speed_wall_0 = 20
+adhesion_type = brim
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile
index f813d5b784..6fb87172b5 100644
--- a/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile
@@ -6,40 +6,23 @@ machine_variant = 0.6 mm
 material = CPE
 
 [settings]
-cool_fan_speed_min = 50
-support_enable = False
-raft_airgap = 0.0
-raft_surface_thickness = 0.27
-raft_interface_line_spacing = 3.0
-bottom_thickness = 1.2
-support_pattern = lines
-adhesion_type = brim
-cool_min_layer_time = 3
-layer_height = 0.15
-speed_infill = 40
-speed_layer_0 = 20
-brim_line_count = 14
-cool_lift_head = True
-retraction_speed = 40.0
-cool_fan_speed_max = 100
-speed_print = 20
-shell_thickness = 1.59
-speed_wall_0 = 20
-material_flow = 100.0
-raft_surface_line_spacing = 3.0
-raft_margin = 5.0
-raft_interface_line_width = 0.4
-layer_height_0 = 0.39
-material_bed_temperature = 70
-top_thickness = 1.2
-top_bottom_thickness = 1.2
-speed_wall_x = 30
 infill_overlap = 17
-infill_before_walls = False
-raft_surface_line_width = 0.4
-skirt_minimal_length = 150.0
+layer_height = 0.15
+top_bottom_thickness = 1.2
+layer_height_0 = 0.39
+brim_line_count = 14
+speed_wall_x = 30
+wall_thickness = 1.59
+speed_infill = 40
 speed_topbottom = 20
-skirt_gap = 3.0
-raft_base_line_width = 1.0
+cool_min_layer_time = 3
+speed_print = 20
+line_width = 0.53
+bottom_thickness = 1.2
 machine_nozzle_size = 0.53
+top_thickness = 1.2
+speed_wall_0 = 20
+adhesion_type = brim
+cool_lift_head = True
+cool_fan_speed_min = 50
 
diff --git a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile
index 9f0e7dcc0a..594083d5f6 100644
--- a/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile
+++ b/resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile
@@ -6,40 +6,23 @@ machine_variant = 0.8 mm
 material = CPE
 
 [settings]
-cool_fan_speed_min = 50
-support_enable = False
-raft_airgap = 0.0
-raft_surface_thickness = 0.27
-raft_interface_line_spacing = 3.0
-bottom_thickness = 1.2
-support_pattern = lines
-adhesion_type = brim
-cool_min_layer_time = 3
-layer_height = 0.2
-speed_infill = 40
-speed_layer_0 = 20
-brim_line_count = 10
-cool_lift_head = True
-retraction_speed = 40.0
-cool_fan_speed_max = 100
-speed_print = 20
-shell_thickness = 2.1
-speed_wall_0 = 20
-material_flow = 100.0
-raft_surface_line_spacing = 3.0
-raft_margin = 5.0
-raft_interface_line_width = 0.4
-layer_height_0 = 0.5
-material_bed_temperature = 70
-top_thickness = 1.2
-top_bottom_thickness = 1.2
-speed_wall_x = 30
 infill_overlap = 17
-infill_before_walls = False
-raft_surface_line_width = 0.4
-skirt_minimal_length = 150.0
+layer_height = 0.2
+top_bottom_thickness = 1.2
+layer_height_0 = 0.5
+brim_line_count = 10
+speed_wall_x = 30
+wall_thickness = 2.1
+speed_infill = 40
 speed_topbottom = 20
-skirt_gap = 3.0
-raft_base_line_width = 1.0
+cool_min_layer_time = 3
+speed_print = 20
+line_width = 0.7
+bottom_thickness = 1.2
 machine_nozzle_size = 0.7
+top_thickness = 1.2
+speed_wall_0 = 20
+adhesion_type = brim
+cool_lift_head = True
+cool_fan_speed_min = 50