Merge pull request #12412 from Ultimaker/PP-19_also_increase_jerk_for_support

PP-19 - Also increase jerk for support

resources/definitions/ultimaker.def.json

@@ -92,9 +92,6 @@
         "meshfix_maximum_deviation": {
             "value": "machine_nozzle_size / 10"
         },
-        "jerk_travel": {
-            "value": "jerk_print"
-        },
         "acceleration_travel": {
             "value": "acceleration_wall"
         },
@@ -157,6 +154,53 @@
         },
         "bridge_fan_speed_3": {
              "value": "cool_fan_speed_min"
+        },
+        "jerk_print": {
+            "value": "20",
+            "minimum_value_warning": 20
+        },
+        "jerk_infill": {
+            "minimum_value_warning": 20
+        },
+        "jerk_wall": {
+            "minimum_value_warning": 20
+        },
+        "jerk_wall_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_roofing": {
+            "minimum_value_warning": 20
+        },
+        "jerk_topbottom": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support_infill": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support_interface": {
+            "minimum_value_warning": 20
+        },
+        "jerk_prime_tower": {
+            "minimum_value_warning": 20
+        },
+        "jerk_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_print_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_travel": {
+            "value": "jerk_print",
+            "minimum_value_warning": 20
+        },
+        "jerk_travel_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_skirt_brim": {
+            "minimum_value_warning": 20
         }
     }
 }

resources/definitions/ultimaker3.def.json

@@ -101,20 +101,6 @@
         "infill_wipe_dist": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },

resources/definitions/ultimaker_s3.def.json

@@ -93,20 +93,6 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },

resources/definitions/ultimaker_s5.def.json

@@ -95,20 +95,6 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg

@@ -16,12 +16,6 @@ is_experimental = True
 infill_sparse_density = 10
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 acceleration_print = 4000
 acceleration_wall = 2000

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg

@@ -16,12 +16,6 @@ is_experimental = True
 infill_sparse_density = 10
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 acceleration_print = 4000
 acceleration_wall = 2000

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg

@@ -16,12 +16,6 @@ is_experimental = True
 infill_sparse_density = 10
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 acceleration_print = 4000
 acceleration_wall = 2000

resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 12
 retraction_extrusion_window = 1

resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 multiple_mesh_overlap = 0

resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 6
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.06
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 7
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg

@@ -23,7 +23,6 @@ infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 7
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg

@@ -23,7 +23,6 @@ infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.06
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg

@@ -22,7 +22,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 jerk_print = 25
-jerk_roofing = 1
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5

resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -19,7 +19,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 material_bed_temperature_layer_0 = =material_bed_temperature + 5

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 material_final_print_temperature = =material_print_temperature - 10

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 7
 
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 7
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg

@@ -20,7 +20,6 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 jerk_print = 25
-jerk_roofing = 1
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -22,9 +22,7 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
-
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5

resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 multiple_mesh_overlap = 0

resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg

@@ -19,7 +19,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 material_bed_temperature_layer_0 = =material_bed_temperature + 5

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 material_final_print_temperature = =material_print_temperature - 10

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 6
 
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 material_final_print_temperature = =material_print_temperature - 10

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -16,7 +16,6 @@ cool_fan_speed_max = 50
 cool_min_speed = 7
 infill_overlap = 0
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 7
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg

@@ -23,7 +23,6 @@ infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg

@@ -22,7 +22,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg

@@ -21,9 +21,7 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
-
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg

@@ -21,9 +21,7 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
-
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5

resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 jerk_print = 25
-jerk_roofing = 1
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 
 machine_min_cool_heat_time_window = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker3_aa0.8.inst.cfg

@@ -17,7 +17,6 @@ default_material_print_temperature = 200
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker3_bb0.8.inst.cfg

@@ -22,11 +22,7 @@ gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
-jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20)
-jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20)
-jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20)
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_heat_up_speed = 1.5

resources/variants/ultimaker3_bb04.inst.cfg

@@ -15,9 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
-jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0

resources/variants/ultimaker3_extended_aa0.8.inst.cfg

@@ -17,7 +17,6 @@ default_material_print_temperature = 200
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker3_extended_bb0.8.inst.cfg

@@ -22,11 +22,7 @@ gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
-jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20)
-jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20)
-jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20)
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_heat_up_speed = 1.5

resources/variants/ultimaker3_extended_bb04.inst.cfg

@@ -15,9 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
-jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0

resources/variants/ultimaker_s3_aa0.8.inst.cfg

@@ -17,7 +17,6 @@ default_material_print_temperature = 200
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker_s3_bb0.8.inst.cfg

@@ -21,11 +21,7 @@ gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
-jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20)
-jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20)
-jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20)
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_heat_up_speed = 1.5

resources/variants/ultimaker_s3_bb04.inst.cfg

@@ -15,9 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
-jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0

resources/variants/ultimaker_s5_bb0.8.inst.cfg

@@ -21,11 +21,7 @@ gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
-jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_heat_up_speed = 1.5