diff --git a/resources/definitions/tronxy_d01.def.json b/resources/definitions/tronxy_d01.def.json index 141414f85f..ff8badd355 100644 --- a/resources/definitions/tronxy_d01.def.json +++ b/resources/definitions/tronxy_d01.def.json @@ -5,6 +5,7 @@ "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -22,8 +23,15 @@ "gantry_height": { "value": 30 }, "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y220.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y220.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish" }, - "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" }, + "machine_max_feedrate_x": { "value": 150 }, + "machine_max_feedrate_y": { "value": 150 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 }, + "machine_max_acceleration_x": { "value": 150 }, + "machine_max_acceleration_y": { "value": 150 }, + "machine_max_acceleration_z": { "value": 150 }, + "machine_max_acceleration_e": { "value": 150 }, "machine_acceleration": { "value": 120 } } } diff --git a/resources/definitions/tronxy_x5sa.def.json b/resources/definitions/tronxy_x5sa.def.json index a4ca9a510a..0e70dd72b4 100644 --- a/resources/definitions/tronxy_x5sa.def.json +++ b/resources/definitions/tronxy_x5sa.def.json @@ -1,10 +1,11 @@ { - "name": "Tronxy X5SA/X5ST/Pro/2E/D01 Plus", + "name": "Tronxy X5SA/X5ST/Pro", "version": 2, "inherits": "tronxy_x", "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,8 @@ ] }, "gantry_height": { "value": 40 }, - "retraction_amount": { "value": 4.5 }, - "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" }, - - "machine_acceleration": { "value": 150 } + "machine_start_gcode": { "default_value": "; X5SA Pro Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"}, + "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y0\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" } } } diff --git a/resources/definitions/tronxy_x5sa_400.def.json b/resources/definitions/tronxy_x5sa_400.def.json index d1448a3287..5604b17619 100644 --- a/resources/definitions/tronxy_x5sa_400.def.json +++ b/resources/definitions/tronxy_x5sa_400.def.json @@ -1,10 +1,11 @@ { - "name": "Tronxy X5SA/X5ST/Pro/2E 400mm", + "name": "Tronxy X5SA/X5ST/Pro 400", "version": 2, "inherits": "tronxy_x", "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,13 @@ ] }, "gantry_height": { "value": 40 }, - "retraction_amount": { "value": 6.5 }, - "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y290 F1500.0 E15 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E30 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" }, + "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y370.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y370.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish"}, + "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" }, - "machine_acceleration": { "value": 150 } + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 } } -} \ No newline at end of file +} diff --git a/resources/definitions/tronxy_x5sa_500.def.json b/resources/definitions/tronxy_x5sa_500.def.json index 44f8d1ba1a..b68a954115 100644 --- a/resources/definitions/tronxy_x5sa_500.def.json +++ b/resources/definitions/tronxy_x5sa_500.def.json @@ -1,10 +1,11 @@ { - "name": "Tronxy X5SA/X5ST/Pro/2E 500mm", + "name": "Tronxy X5SA/X5ST/Pro 500", "version": 2, "inherits": "tronxy_x", "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,13 @@ ] }, "gantry_height": { "value": 40 }, - "retraction_amount": { "value": 6.5 }, - "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y290 F1500.0 E15 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E30 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" }, + "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n "}, + "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" }, - "machine_acceleration": { "value": 150 } + "machine_max_feedrate_x": { "value": 150 }, + "machine_max_feedrate_y": { "value": 150 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 } } } diff --git a/resources/definitions/tronxy_xy2.def.json b/resources/definitions/tronxy_xy2.def.json index ce7966fc3b..eaae1dbb08 100644 --- a/resources/definitions/tronxy_xy2.def.json +++ b/resources/definitions/tronxy_xy2.def.json @@ -5,6 +5,7 @@ "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,18 @@ ] }, "gantry_height": { "value": 40 }, - "retraction_amount": { "value": 4.5 }, - "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" }, + "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"}, + "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0 ;Turn-off fan\nM104 S0\nM140 S0\n\nM84 X Y E\n" }, - "machine_acceleration": { "value": 150 } + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 }, + "machine_max_acceleration_x": { "value": 150 }, + "machine_max_acceleration_y": { "value": 150 }, + "machine_max_acceleration_z": { "value": 150 }, + "machine_max_acceleration_e": { "value": 150 }, + "machine_acceleration": { "value": 80 } } } diff --git a/resources/definitions/tronxy_xy2pro.def.json b/resources/definitions/tronxy_xy2pro.def.json index fb2bd70ea3..59e727bbb0 100644 --- a/resources/definitions/tronxy_xy2pro.def.json +++ b/resources/definitions/tronxy_xy2pro.def.json @@ -1,10 +1,11 @@ { - "name": "Tronxy XY-2 Pro/Pro 2E/XY3 SE", + "name": "Tronxy XY-2 Pro", "version": 2, "inherits": "tronxy_x", "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,23 @@ ] }, "gantry_height": { "value": 40 }, - "retraction_amount": { "value": 4.5 }, - "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" }, + "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"}, + "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" }, - "machine_acceleration": { "value": 150 } + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 }, + + "machine_max_acceleration_x": { "value": 120 }, + "machine_max_acceleration_y": { "value": 120 }, + "machine_max_acceleration_z": { "value": 120 }, + "machine_max_acceleration_e": { "value": 120 }, + "machine_acceleration": { "value": 150 }, + + "machine_max_jerk_xy": { "value": 20 }, + "machine_max_jerk_z": { "value": 0.4 }, + "machine_max_jerk_e": { "value": 5 } } } diff --git a/resources/definitions/tronxy_xy3.def.json b/resources/definitions/tronxy_xy3.def.json index 941ca7142f..db03c344f5 100644 --- a/resources/definitions/tronxy_xy3.def.json +++ b/resources/definitions/tronxy_xy3.def.json @@ -1,10 +1,11 @@ { - "name": "Tronxy XY-3/Pro", + "name": "Tronxy XY-3", "version": 2, "inherits": "tronxy_x", "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,18 @@ ] }, "gantry_height": { "value": 30 }, - "retraction_amount": { "value": 5 }, - "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" }, + "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"}, + "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" }, - "machine_acceleration": { "value": 150 } + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 }, + "machine_max_acceleration_x": { "value": 150 }, + "machine_max_acceleration_y": { "value": 150 }, + "machine_max_acceleration_z": { "value": 150 }, + "machine_max_acceleration_e": { "value": 150 }, + "machine_acceleration": { "value": 80 } } }