diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..88a2326843
--- /dev/null
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_nylon-cf-slide
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC+ 0.6
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
new file mode 100644
index 0000000000..dc9870b7ff
--- /dev/null
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petcf
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC+ 0.6
+
+[values]
+infill_sparse_density = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_abs_0.2mm.inst.cfg
new file mode 100644
index 0000000000..928293a327
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_abs_0.2mm.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = draft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -2
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+cool_min_layer_time = 4
+cool_min_layer_time_fan_speed_max = 9
+cool_min_temperature = =material_print_temperature - 10
+retraction_prime_speed = 15
+support_interface_enable = False
+support_structure = tree
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_abs_0.3mm.inst.cfg
new file mode 100644
index 0000000000..a5a83362cc
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_abs_0.3mm.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -3
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+cool_min_layer_time = 4
+cool_min_layer_time_fan_speed_max = 9
+cool_min_temperature = =material_print_temperature - 10
+material_print_temperature = =default_material_print_temperature + 10
+retraction_prime_speed = 15
+support_interface_enable = False
+support_structure = tree
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.2mm.inst.cfg
new file mode 100644
index 0000000000..be16bb734f
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.2mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = draft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -2
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+cool_min_layer_time = 4
+material_print_temperature = =default_material_print_temperature + 5
+support_interface_enable = False
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.3mm.inst.cfg
new file mode 100644
index 0000000000..d058e1aef5
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.3mm.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -3
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+cool_min_layer_time = 4
+material_print_temperature = =default_material_print_temperature + 10
+support_interface_enable = False
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..a5f990f3d8
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.2mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = draft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -2
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+retraction_prime_speed = =retraction_speed
+support_interface_enable = False
+support_structure = tree
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..295b7efbfc
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.3mm.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -3
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+material_print_temperature = =default_material_print_temperature + 20
+retraction_prime_speed = =retraction_speed
+support_interface_enable = False
+support_structure = tree
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_tough-pla_0.2mm.inst.cfg
new file mode 100644
index 0000000000..f934c2bfa0
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_tough-pla_0.2mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_tough_pla
+quality_type = draft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -2
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+retraction_prime_speed = =retraction_speed
+support_interface_enable = False
+support_structure = tree
+
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_tough-pla_0.3mm.inst.cfg
new file mode 100644
index 0000000000..aa81282888
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_tough-pla_0.3mm.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_tough_pla
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = AA+ 0.6
+weight = -3
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+material_print_temperature = =default_material_print_temperature + 20
+retraction_prime_speed = =retraction_speed
+support_interface_enable = False
+support_structure = tree
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+
diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm.inst.cfg
new file mode 100644
index 0000000000..195c11a4e0
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_nylon-cf-slide
+quality_type = draft
+setting_version = 25
+type = quality
+variant = CC+ 0.6
+weight = -2
+
+[values]
+cool_min_layer_time_fan_speed_max = 11
+retraction_prime_speed = 15
+
diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.3mm.inst.cfg
new file mode 100644
index 0000000000..4f4f7f7eff
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.3mm.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_nylon-cf-slide
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = CC+ 0.6
+weight = -3
+
+[values]
+cool_min_layer_time_fan_speed_max = 11
+retraction_prime_speed = 15
+
diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm.inst.cfg
new file mode 100644
index 0000000000..52dc6f1a5e
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petcf
+quality_type = draft
+setting_version = 25
+type = quality
+variant = CC+ 0.6
+weight = -2
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+support_interface_enable = False
+
diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.3mm.inst.cfg
new file mode 100644
index 0000000000..cd42a93fec
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.3mm.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_petcf
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = CC+ 0.6
+weight = -3
+
+[values]
+bridge_skin_material_flow = 200
+bridge_wall_material_flow = 200
+material_print_temperature = =default_material_print_temperature + 10
+support_interface_enable = False
+wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+
diff --git a/resources/variants/ultimaker_s8_aa_plus06.inst.cfg b/resources/variants/ultimaker_s8_aa_plus06.inst.cfg
new file mode 100644
index 0000000000..1eabef191c
--- /dev/null
+++ b/resources/variants/ultimaker_s8_aa_plus06.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = AA+ 0.6
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 25
+type = variant
+
+[values]
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = AA+ 0.6
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.2
+retraction_prime_speed = =retraction_speed
+
diff --git a/resources/variants/ultimaker_s8_cc_plus06.inst.cfg b/resources/variants/ultimaker_s8_cc_plus06.inst.cfg
new file mode 100644
index 0000000000..2a1c43873f
--- /dev/null
+++ b/resources/variants/ultimaker_s8_cc_plus06.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s8
+name = CC+ 0.6
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 25
+type = variant
+
+[values]
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = CC+ 0.6
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.2
+retraction_prime_speed = =retraction_speed
+