From 6895a7c0f5ea96d36b083fded788a7d50eeca4e4 Mon Sep 17 00:00:00 2001 From: BluefireXD Date: Mon, 7 Jan 2019 02:55:13 +0100 Subject: [PATCH] Wrong place --- anycubic_chiron_normal.inst.cfg | 60 --------------------------------- 1 file changed, 60 deletions(-) delete mode 100644 anycubic_chiron_normal.inst.cfg diff --git a/anycubic_chiron_normal.inst.cfg b/anycubic_chiron_normal.inst.cfg deleted file mode 100644 index e0c583f25c..0000000000 --- a/anycubic_chiron_normal.inst.cfg +++ /dev/null @@ -1,60 +0,0 @@ -[general] -version = 4 -name = Normal -definition = anycubic_chiron - -[metadata] -setting_version = 5 -type = quality -quality_type = normal -weight = 1 - -[values] -acceleration_enabled = True -acceleration_print = 1800 -acceleration_travel = 3000 -adhesion_type = skirt -brim_width = 4.0 -cool_fan_full_at_height = 0.5 -cool_fan_speed = 100 -cool_fan_speed_0 = 100 -infill_overlap = 15 -infill_pattern = zigzag -infill_sparse_density = 25 -initial_layer_line_width_factor = 140 -jerk_enabled = True -jerk_print = 8 -jerk_travel = 10 -layer_height = 0.2 -layer_height_0 = 0.2 -material_bed_temperature = 60 -material_diameter = 1.75 -material_print_temperature = 200 -material_print_temperature_layer_0 = 0 -retract_at_layer_change = False -retraction_amount = 6 -retraction_hop = 0.075 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 1.5 -retraction_speed = 40 -skirt_brim_speed = 40 -skirt_gap = 5 -skirt_line_count = 3 -speed_infill = =speed_print -speed_print = 50 -speed_support = 30 -speed_topbottom = =math.ceil(speed_print * 20 / 50) -speed_travel = 100 -speed_wall = =speed_print -speed_wall_x = =speed_print -support_angle = 60 -support_enable = True -support_interface_enable = True -support_pattern = triangles -support_roof_enable = True -support_type = everywhere -support_use_towers = False -support_xy_distance = 0.7 -top_bottom_thickness = 1.2 -wall_thickness = 1.2