diff --git a/resources/definitions/anycubic_kobra2.def.json b/resources/definitions/anycubic_kobra2.def.json
index aea6b4d344..965504338b 100644
--- a/resources/definitions/anycubic_kobra2.def.json
+++ b/resources/definitions/anycubic_kobra2.def.json
@@ -42,7 +42,7 @@
         "machine_max_jerk_xy": { "value": 10 },
         "machine_max_jerk_z": { "value": 2 },
         "machine_name": { "default_value": "Anycubic Kobra 2" },
-        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ; use absolute coordinates\nM82 ; use absolute distances for extrusion\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X5 Y0  F3000\nG1 Z0.3 ; set nozzle height\nG92 E0\nG1 X50 Y0 E20 F500 ; Extrude 20mm of filament in a 5cm line \nG92 E0 ; zero the extruded length again \nG1 E-4.5 F4800 ; Retract a little \nG92 E0\nG1 X120 F4000 ; Quickly wipe away from the filament line\nM117 ; Printing\u2026\nG5" },
+        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ; use absolute coordinates\nM82 ; use absolute distances for extrusion\nM104 S{material_print_temperature_layer_0} ; set extruder temp\nM140 S{material_bed_temperature_layer_0} ; set bed temp\nM190 S{material_bed_temperature_layer_0} ; wait for bed temp\nM109 S{material_print_temperature_layer_0} ; wait for extruder temp\nG28 ; home all axes\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X5 Y0  F3000\nG1 Z0.3 ; set nozzle height\nG92 E0\nG1 X50 Y0 E20 F500 ; Extrude 20mm of filament in a 5cm line \nG92 E0 ; zero the extruded length again \nG1 E-4.5 F4800 ; Retract a little \nG92 E0\nG1 X120 F4000 ; Quickly wipe away from the filament line\nM117 ; Printing\u2026\nG5" },
         "machine_width": { "default_value": 220 },
         "material_bed_temperature": { "maximum_value_warning": 110 },
         "material_bed_temperature_layer_0": { "maximum_value_warning": 110 },
diff --git a/resources/definitions/anycubic_kobra_go.def.json b/resources/definitions/anycubic_kobra_go.def.json
index 8c546bdbb7..686734d962 100644
--- a/resources/definitions/anycubic_kobra_go.def.json
+++ b/resources/definitions/anycubic_kobra_go.def.json
@@ -23,7 +23,7 @@
         "machine_heated_bed": { "default_value": true },
         "machine_height": { "default_value": 250 },
         "machine_name": { "default_value": "Anycubic Kobra Go" },
-        "machine_start_gcode": { "default_value": "M140 S[first_layer_bed_temperature]; Heat bed\nM104 S[first_layer_temperature\n            ]; Heat extruder\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM190 S[first_layer_bed_temperature\n            ]; Wait for bed to get up to temperature\nM109 S[first_layer_temperature\n            ]; Wait for extruder to get up to temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X2 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X2.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X2.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 F2400 E-1\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" },
+        "machine_start_gcode": { "default_value": "M140 S{material_bed_temperature_layer_0}; Heat bed\nM104 S{material_print_temperature_layer_0}; Heat extruder\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM190 S{material_bed_temperature_layer_0}; Wait for bed to get up to temperature\nM109 S{material_print_temperature_layer_0}; Wait for extruder to get up to temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X2 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X2.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X2.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 F2400 E-1\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" },
         "machine_width": { "default_value": 222 }
     }
 }
\ No newline at end of file