Merge branch '5.1' of github.com:Ultimaker/Cura

plugins/ImageReader/ConfigUI.qml

@@ -31,7 +31,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "Height (mm)")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea {
                 id: peak_height_label
@@ -64,7 +64,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "Base (mm)")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea
             {
@@ -98,7 +98,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "Width (mm)")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea {
                 id: width_label
@@ -132,7 +132,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "Depth (mm)")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea {
                 id: depth_label
@@ -166,7 +166,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: ""
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea {
                 id: lighter_is_higher_label
@@ -203,7 +203,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "Color Model")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea {
                 id: color_model_label
@@ -240,7 +240,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "1mm Transmittance (%)")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea {
                 id: transmittance_label
@@ -272,7 +272,7 @@ UM.Dialog
             Layout.fillWidth: true
             Layout.minimumWidth: UM.Theme.getSize("setting_control").width
             text: catalog.i18nc("@action:label", "Smoothing")
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
 
             MouseArea
             {

plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml

@@ -47,7 +47,7 @@ Item
         Column
         {
             Layout.fillWidth: true
-            Layout.alignment: Qt.AlignmentFlag.AlignTop
+            Layout.alignment: Qt.AlignTop
 
             spacing: base.columnSpacing
 
@@ -176,7 +176,7 @@ Item
         Column
         {
             Layout.fillWidth: true
-            Layout.alignment: Qt.AlignmentFlag.AlignTop
+            Layout.alignment: Qt.AlignTop
 
             spacing: base.columnSpacing
 

plugins/Marketplace/resources/qml/LicenseDialog.qml

@@ -48,7 +48,7 @@ UM.Dialog
                 font: UM.Theme.getFont("large")
                 anchors.verticalCenter: icon.verticalCenter
                 height: UM.Theme.getSize("marketplace_large_icon").height
-                verticalAlignment: Qt.AlignmentFlag.AlignVCenter
+                verticalAlignment: Qt.AlignVCenter
             }
         }
 

plugins/Marketplace/resources/qml/PackageDetails.qml

@@ -31,7 +31,7 @@ Item
 
         Cura.SecondaryButton
         {
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
             Layout.preferredHeight: UM.Theme.getSize("action_button").height
             Layout.preferredWidth: height
 
@@ -47,7 +47,7 @@ Item
 
         UM.Label
         {
-            Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+            Layout.alignment: Qt.AlignVCenter
             Layout.fillWidth: true
 
             text: detailPage.title

resources/qml/Preferences/Materials/MaterialsSyncDialog.qml

@@ -402,7 +402,7 @@ Window
                                 UM.Label
                                 {
                                     Layout.fillWidth: true
-                                    Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+                                    Layout.alignment: Qt.AlignVCenter
                                     text: catalog.i18nc("@text Asking the user whether printers are missing in a list.", "Printers missing?")
                                       + "\n"
                                       + catalog.i18nc("@text", "Make sure all your printers are turned ON and connected to Digital Factory.")
@@ -413,7 +413,7 @@ Window
                                 Cura.SecondaryButton
                                 {
                                     id: refreshListButton
-                                    Layout.alignment: Qt.AlignmentFlag.AlignVCenter
+                                    Layout.alignment: Qt.AlignVCenter
                                     text: catalog.i18nc("@button", "Refresh List")
                                     iconSource: UM.Theme.getIcon("ArrowDoubleCircleRight")
                                     onClicked: Cura.API.account.sync(true)

resources/qml/WelcomePages/WhatsNewContent.qml

@@ -65,7 +65,7 @@ Item
 
                 Rectangle
                 {
-                    Layout.alignment: Qt.AlignmentFlag.AlignHCenter
+                    Layout.alignment: Qt.AlignHCenter
                     color: UM.Theme.getColor("viewport_overlay")
                     width: whatsNewViewport.width
                     height: whatsNewViewport.height

resources/quality/anycubic_chiron/anycubic_chiron_draft.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/anycubic_chiron/anycubic_chiron_high.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/anycubic_chiron/anycubic_chiron_normal.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg

@@ -27,7 +27,6 @@ jerk_print = 8
 jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
-material_diameter = 1.75
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg

@@ -27,7 +27,6 @@ jerk_print = 8
 jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
-material_diameter = 1.75
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg

@@ -27,7 +27,6 @@ jerk_print = 8
 jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
-material_diameter = 1.75
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/crazy3dprint/crazy3dprint_global_0.10_fine.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.10
 layer_height_0 = 0.20
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 210
 material_print_temperature_layer_0 = 210
 speed_infill = =speed_print

resources/quality/crazy3dprint/crazy3dprint_global_0.20_normal.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.2
 layer_height_0 = 0.3
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 210
 material_print_temperature_layer_0 = 210
 speed_infill = =speed_print

resources/quality/crazy3dprint/crazy3dprint_global_0.30_draft.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.30
 layer_height_0 = 0.40
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 210
 material_print_temperature_layer_0 = 210
 speed_infill = =speed_print

resources/quality/crazy3dprint/crazy3dprint_global_0.40_coarse.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.4
 layer_height_0 = 0.4
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 210
 material_print_temperature_layer_0 = 210
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.08_ultra.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.08
 layer_height_0 = 0.12
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.12_super.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.12
 layer_height_0 = 0.16
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.16_adaptive.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.16
 layer_height_0 = 0.2
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.20_standard.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.2
 layer_height_0 = 0.28
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.28_low.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.28
 layer_height_0 = 0.32
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.32_draft.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.32
 layer_height_0 = 0.32
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.40_coarse.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.4
 layer_height_0 = 0.4
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 205
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/flashforge/flashforge_global_0.48_extra_coarse.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_speed_0 = 0
 layer_height = 0.48
 layer_height_0 = 0.48
 material_bed_temperature = 40
-material_diameter = 1.75
 material_print_temperature = 205
 material_print_temperature_layer_0 = 0
 speed_infill = =speed_print

resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg

@@ -30,7 +30,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg

@@ -30,7 +30,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg

@@ -30,7 +30,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg

@@ -29,7 +29,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_normal.inst.cfg

@@ -30,7 +30,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_thick.inst.cfg

@@ -30,7 +30,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_thin.inst.cfg

@@ -30,7 +30,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/gmax15plus/gmax15plus_global_very_thick.inst.cfg

@@ -29,7 +29,6 @@ retraction_combing = off
 retraction_amount = 0.75
 retraction_speed = 70
 material_flow = 98
-material_diameter = 1.75
 
 support_use_towers = False
 support_z_distance = 0.2

resources/quality/katihal/alya3dp_normal_generic_pla.inst.cfg

@@ -11,7 +11,6 @@ weight = 3
 material = generic_pla
 
 [values]
-material_diameter = 1.75
 speed_print = 40
 speed_topbottom = 30
 speed_wall_0 = 35

resources/quality/katihal/alyanx3dp_normal_generic_pla.inst.cfg

@@ -11,7 +11,6 @@ weight = 2
 material = generic_pla
 
 [values]
-material_diameter = 1.75
 speed_print = 40
 speed_topbottom = 30
 speed_wall_0 = 35

resources/quality/katihal/kupido_normal_generic_abs.inst.cfg

@@ -11,7 +11,6 @@ weight = 3
 material = generic_abs
 
 [values]
-material_diameter = 1.75
 speed_print = 40
 speed_topbottom = 30
 speed_wall_0 = 35

resources/quality/katihal/kupido_normal_generic_pla.inst.cfg

@@ -11,7 +11,6 @@ weight = 3
 material = generic_pla
 
 [values]
-material_diameter = 1.75
 speed_print = 40
 speed_topbottom = 30
 speed_wall_0 = 35

resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg

@@ -24,7 +24,6 @@ speed_travel = 120
 
 material_print_temperature = 246
 material_bed_temperature = 85
-material_diameter = 1.75
 
 retraction_speed = 50
 retraction_amount = 1.5

resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg

@@ -24,7 +24,6 @@ speed_travel = 120
 
 material_print_temperature = 246
 material_bed_temperature = 85
-material_diameter = 1.75
 
 retraction_speed = 50
 retraction_amount = 1.5

resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg

@@ -24,7 +24,6 @@ speed_travel = 120
 
 material_print_temperature = 246
 material_bed_temperature = 85
-material_diameter = 1.75
 
 retraction_speed = 50
 retraction_amount = 1.5

resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg

@@ -24,7 +24,6 @@ speed_travel = 120
 
 material_print_temperature = 246
 material_bed_temperature = 85
-material_diameter = 1.75
 
 retraction_speed = 50
 retraction_amount = 1.5

resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg

@@ -24,7 +24,6 @@ speed_travel = 120
 
 material_print_temperature = 246
 material_bed_temperature = 85
-material_diameter = 1.75
 
 retraction_speed = 50
 retraction_amount = 1.5

resources/quality/kemiq_q2/kemiq_q2_beta_pla_draft.inst.cfg

@@ -18,7 +18,6 @@ speed_print = 60
 
 material_print_temperature = 214
 material_bed_temperature = 60
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_beta_pla_extra_fine.inst.cfg

@@ -18,7 +18,6 @@ speed_print = 30
 
 material_print_temperature = 214
 material_bed_temperature = 60
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_beta_pla_fine.inst.cfg

@@ -18,7 +18,6 @@ speed_print = 40
 
 material_print_temperature = 214
 material_bed_temperature = 60
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_beta_pla_low.inst.cfg

@@ -18,7 +18,6 @@ speed_print = 60
 
 material_print_temperature = 214
 material_bed_temperature = 60
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_beta_pla_normal.inst.cfg

@@ -18,7 +18,6 @@ speed_print = 50
 
 material_print_temperature = 214
 material_bed_temperature = 60
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_gama_pla_draft.inst.cfg

@@ -17,7 +17,6 @@ adhesion_type = raft
 speed_print = 60
 
 material_print_temperature = 214
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg

@@ -23,7 +23,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 40)
 speed_travel = 120
 
 material_print_temperature = 214
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg

@@ -23,7 +23,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_travel = 120
 
 material_print_temperature = 214
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_gama_pla_low.inst.cfg

@@ -17,7 +17,6 @@ adhesion_type = raft
 speed_print = 60
 
 material_print_temperature = 214
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg

@@ -23,7 +23,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 60)
 speed_travel = 120
 
 material_print_temperature = 214
-material_diameter = 1.75
 
 retraction_speed = 40
 retraction_amount = 2.15

resources/quality/key3d/key3d_tyro_best.inst.cfg

@@ -46,7 +46,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/key3d/key3d_tyro_fast.inst.cfg

@@ -45,7 +45,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/key3d/key3d_tyro_normal.inst.cfg

@@ -45,7 +45,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg

@@ -47,7 +47,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a31/nwa3d_a31_e.inst.cfg

@@ -44,7 +44,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a31/nwa3d_a31_fast.inst.cfg

@@ -47,7 +47,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a31/nwa3d_a31_normal.inst.cfg

@@ -46,7 +46,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg

@@ -45,7 +45,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg

@@ -45,7 +45,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/nwa3d_a5/nwa3d_a5_normal.inst.cfg

@@ -45,7 +45,6 @@ gradual_infill_steps = 0
 infill_before_walls = False
 infill_support_enabled = False
 max_skin_angle_for_expansion = 90
-material_diameter = 1.75
 default_material_print_temperature = 220
 material_print_temperature = 220
 material_print_temperature_layer_0 = 220

resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg

@@ -14,7 +14,6 @@ global_quality = True
 brim_width = 4.0
 infill_pattern = zigzag
 layer_height = 0.3
-material_diameter = 1.75
 speed_infill = =speed_print
 speed_print = 50
 speed_support = 30

resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg

@@ -14,7 +14,6 @@ global_quality = True
 brim_width = 4.0
 infill_pattern = zigzag
 layer_height = 0.1
-material_diameter = 1.75
 speed_infill = =speed_print
 speed_print = 50
 speed_support = 30

resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg

@@ -14,7 +14,6 @@ global_quality = True
 brim_width = 4.0
 infill_pattern = zigzag
 layer_height = 0.2
-material_diameter = 1.75
 speed_infill = =math.ceil(speed_print * 60 / 50)
 speed_print = 50
 speed_support = 30

resources/quality/tinyboy/tinyboy_e10_draft.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_e10_high.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_e10_normal.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_e16_draft.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_e16_high.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_e16_normal.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_fabrikator15_draft.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
 material_bed_temperature = 60
-material_diameter = 1.75
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/tinyboy/tinyboy_fabrikator15_high.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
 material_bed_temperature = 60
-material_diameter = 1.75
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/tinyboy/tinyboy_fabrikator15_normal.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
 material_bed_temperature = 60
-material_diameter = 1.75
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075

resources/quality/tinyboy/tinyboy_ra20_draft.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_ra20_high.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tinyboy/tinyboy_ra20_normal.inst.cfg

@@ -29,7 +29,6 @@ jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
 material_bed_temperature = 60
-material_diameter = 1.75
 material_print_temperature = 200
 material_print_temperature_layer_0 = 0
 retract_at_layer_change = False

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Coarse_Quality.inst.cfg

@@ -29,7 +29,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Draft_Quality.inst.cfg

@@ -29,7 +29,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Extra_Coarse_Quality.inst.cfg

@@ -29,7 +29,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_High_Quality.inst.cfg

@@ -29,7 +29,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Normal_Quality.inst.cfg

@@ -29,7 +29,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg

@@ -38,7 +38,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg

@@ -38,7 +38,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_k25/tizyx_k25_high.inst.cfg

@@ -25,7 +25,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/tizyx/tizyx_k25/tizyx_k25_normal.inst.cfg

@@ -25,7 +25,6 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 2
 speed_print = 60
 cool_fan_speed_0 = 10

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_1p0_pro_copper_0.40_abs_coarse.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.4
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_1p0_pro_copper_0.40_abs_draft.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.3
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_1p0_pro_copper_0.40_abs_fine.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.1
 layer_height_0 = 0.2
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_1p0_pro_copper_0.40_abs_normal.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.2
 layer_height_0 = 0.35
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_coarse.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.4
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_draft.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.3
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_fine.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.1
 layer_height_0 = 0.2
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_normal.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.2
 layer_height_0 = 0.3
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_coarse.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.4
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_draft.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.3
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_fine.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.1
 layer_height_0 = 0.2
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_normal.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.2
 layer_height_0 = 0.35
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_1p0_pro_copper_0.40_antibact_coarse.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.4
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_1p0_pro_copper_0.40_antibact_draft.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.3
 layer_height_0 = 0.4
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_1p0_pro_copper_0.40_antibact_fine.inst.cfg

@@ -14,7 +14,6 @@ variant = Copper 0.4mm Nozzle
 [values]
 layer_height = 0.1
 layer_height_0 = 0.2
-material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature