新增 goofoo 2-1混色脚本，优化机型配置.

plugins/PostProcessingPlugin/scripts/ColorMix_goofoo.py

@@ -0,0 +1,282 @@
+# ColorMix_goofoo extruder color mix and blending
+# This script is specific for the goofoo dual extruder. 
+# -*- coding: UTF-8 -*-
+
+import re #To perform the search and replace.
+from ..Script import Script
+
+class ColorMix_goofoo(Script):
+    def __init__(self):
+        super().__init__()
+
+    def getSettingDataString(self):
+        return """{
+            "name":"ColorMix 2-1 goofoo",
+            "key":"ColorMix_goofoo",
+            "metadata": {},
+            "version": 2,
+            "settings":
+            {
+                "units_of_measurement":
+                {
+                    "label": "Units",
+                    "description": "Input value as mm or layer number.",
+                    "type": "enum",
+                    "options": {"mm":"mm","layer":"Layer"},
+                    "default_value": "layer"
+                },
+                "start_height":
+                {
+                    "label": "Start Height",
+                    "description": "Value to start at (mm or layer)",
+                    "type": "float",
+                    "default_value": 0,
+                    "minimum_value": "0"
+                },
+                "behavior":
+                {
+                    "label": "Fixed or blend",
+                    "description": "Select Fixed (set new mixture) or Blend mode (dynamic mix)",
+                    "type": "enum",
+                    "options": {"fixed_value":"Fixed","blend_value":"Blend"},
+                    "default_value": "fixed_value"
+                },
+                "mix_radio":
+                {
+                    "label": "mix ratio",
+                    "description": "First extruder percentage 0-100",
+                    "type": "int",
+                    "default_value": 100,
+                    "minimum_value": "0",
+                    "minimum_value_warning": "0",
+                    "maximum_value_warning": "100"
+                }
+            }
+        }"""
+    def getValue(self, line, key, default = None): #replace default getvalue due to comment-reading feature
+        if not key in line:
+            return default
+        subPart = line[line.find(key) + len(key):] #allows for string lengths larger than 1
+        if ";ChangeAtZ" in key:
+            m = re.search("^[0-4]", subPart)
+        elif ";LAYER:" in key:
+            m = re.search("^[+-]?[0-9]*", subPart)
+        elif ";LAYER_COUNT:" in key:
+            m = re.search("[0-9]*", subPart)
+        else:
+            #the minus at the beginning allows for negative values, e.g. for delta printers
+            m = re.search("^[-]?[0-9]*\.?[0-9]*", subPart)
+        if m == None:
+            return default
+        try:
+            return float(m.group(0))
+        except:
+            return default 
+    def analyData(self,data,layerObjs,setObj):
+        for active_layer in data:
+            lines = active_layer.split("\n")
+            for line in lines:#;GOOFOO_2-1:sRatio:5 fixed:1 layer 5
+                if ";GOOFOO_2-1:" in line:#checks for state change comment
+                    layerObjs.append({'sRatio':int(self.getValue(line,"sRatio",0)),'fixed':int(self.getValue(line,"fixed",1)),'layer':int(self.getValue(line,"layer",0)),'isUse':0})
+    def findItem(self,layerObjs,idx):
+        if None == layerObjs:
+            return None
+        arrCount = len(layerObjs)
+        if arrCount <= 0:
+            return None
+        itemObj = None
+        for i in range(arrCount):
+            itemObj = layerObjs[i]
+            if int(idx) == int(itemObj['layer']):
+                return itemObj
+        return None
+    def getSetObj(self,setObj,data,layerObjs):
+        sHei = self.getSettingValueByKey("start_height")
+        sMix = int(self.getSettingValueByKey("mix_radio"))
+        sMix = 100 - sMix
+        setObj['sRatio'] = sMix
+        isFixed = 0
+        if "fixed_value" == self.getSettingValueByKey("behavior"):
+            isFixed = 1
+        setObj['fixed'] = isFixed
+
+        isMMType = 0
+        if "mm" == self.getSettingValueByKey("units_of_measurement"):
+            isMMType = 1
+        
+        layerHeight = 0
+        for active_layer in data:
+            lines = active_layer.split("\n")
+            for line in lines:
+                if ";Layer height: " in line:
+                    layerHeight = self.getValue(line,";Layer height: ",layerHeight)
+                    break
+            if layerHeight != 0:
+                break
+        if 0 == layerHeight:
+            layerHeight = .2
+        setObj['layerHeight'] = layerHeight
+        layerCount = 0
+        for active_layer in data:
+            lines = active_layer.split("\n")
+            for line in lines:
+                if ";LAYER_COUNT:" in line:
+                    layerCount = int(self.getValue(line,";LAYER_COUNT:",layerCount))
+                    break
+            if layerCount != 0:
+                break
+        if 0 == layerCount:
+            layerCount = 1
+        setObj['layerCount'] = int(layerCount)
+        
+        if isMMType:
+            sHei = round(sHei / layerHeight)
+        if sHei < 0:
+            sHei = 1 
+        startLayer = int(sHei)
+        if startLayer > layerCount:
+            startLayer = layerCount
+            setObj['isSetEnd'] = 1
+        setObj['layer'] = startLayer
+        
+        itemObj = None
+        itemObj = self.findItem(layerObjs,startLayer)
+        if None == itemObj:
+            layerObjs.append({'sRatio':sMix,'incRation':0.0,'fixed':isFixed,'layer':startLayer,'isUse':0})
+        else:
+            itemObj['sRatio'] = sMix
+            itemObj['incRation'] = 0.0
+            itemObj['fixed'] = isFixed
+            itemObj['isUse'] = 0
+    def sortLayer(self,layerObjs,setObj):
+        itemObj = None
+        itemObj = self.findItem(layerObjs,0)
+        if None == itemObj:
+            layerObjs.append({'sRatio':100,'fixed':1,'layer':0})
+        itemObj = self.findItem(layerObjs,int(setObj['layerCount']))
+        if None == itemObj:
+            layerObjs.append({'sRatio':0,'fixed':1,'layer':int(setObj['layerCount'])})
+        else:
+            setObj['isSetEnd'] = 1
+    def analyIncRatio(self,layerObjs,setObj):
+        if None == layerObjs:
+            return None
+        layerCount = len(layerObjs)
+        if 0 >= layerCount:
+            return None
+        for i in range(layerCount-1):
+            itemObj = layerObjs[i]
+            nextObj = layerObjs[i+1]
+            if None != itemObj and None != nextObj:
+                # or setObj['isSetEnd'] == 1
+                # if 5 > int(itemObj['sRatio']):
+                #     itemObj['sRatio'] = 5
+                # if 95 < int(itemObj['sRatio']):
+                #     itemObj['sRatio'] = 95
+                # if 5 > int(nextObj['sRatio']):
+                #     nextObj['sRatio'] = 5
+                # if 95 < int(nextObj['sRatio']):
+                #     nextObj['sRatio'] = 95
+                if 0 == itemObj['fixed']:
+                    itemObj['incRation'] = float((nextObj['sRatio']-itemObj['sRatio'])/(nextObj['layer']-itemObj['layer']))
+                else:
+                    itemObj['incRation'] = 0.0
+            else:
+                itemObj['incRation'] = 0.0
+        layerObjs[layerCount-1]['incRation'] = 0.0
+    def findLayerInfo(self,layer,layerObjs):
+        if int(layer) < 0:
+            return None
+        if None == layerObjs:
+            return None
+        layerCount = len(layerObjs)
+        if layerCount <= 1:
+            return None
+        itemObj = None
+        for i in range(layerCount-1):
+            itemObj = layerObjs[i]
+            nextObj = layerObjs[i+1]
+            if int(layer) >= int(itemObj['layer']) and int(layer) <= int(nextObj['layer']) and itemObj['isUse'] == 0:
+                if(itemObj['fixed'] == 1):
+                    itemObj['isUse'] = 1
+                return itemObj
+        return None
+    def createCommand(self,data,layerObjs,setObj):
+        index = 0
+        layer = -1
+        itemObj = None
+        isInitMaxHei = 0
+        nextLine = ""
+        findCount = 0
+        curLayer = 0
+        start = 0
+        for active_layer in data:
+            modified_gcode = ""
+            lineIndex = 0
+            lines = active_layer.split("\n")
+            for line in lines:
+                #dont leave blanks 
+                if ";MAX_Z_HEIGHT:" in line:
+                    isInitMaxHei = 1
+                if isInitMaxHei == 0:
+                    isInitMaxHei = 1
+                    modified_gcode = ";MAX_Z_HEIGHT:{0:f}\n".format(float(setObj['layerHeight'] * setObj['layerCount']))
+                
+                if start == 0 and ";LAYER_COUNT" in line:
+                    start = 1
+                if start == 1:
+                    if itemObj != None and "G1" in line or "G0" in line and "E" in line:
+                        modified_gcode += "M6050 S{0:2f} P{1:2f} Z{2:f}\n".format(float(firstExtruderValue/100.0),0.0,float(curHeight))
+                    if ("G1" in line or "G0" in line) and "Z" in line:
+                        itemObj = self.findLayerInfo(int(curLayer),layerObjs)
+                        if None != itemObj:
+                            firstExtruderValue = int(((curLayer - itemObj['layer']) * itemObj['incRation']) + itemObj['sRatio'])
+                            curHeight = self.getValue(line,"Z",0.0)
+                            modified_gcode += "M6050 S{0:2f} P{1:2f} Z{2:f}\n".format(float(firstExtruderValue/100.0),float(itemObj['incRation']/100),float(curHeight))
+                        curLayer+=1
+                if line != "":
+                    modified_gcode += line + "\n"
+                lineIndex += 1  #for deleting index
+            data[index] = modified_gcode
+            index += 1
+    def delFlag(self,data,layerObjs):
+        index = 0
+        for active_layer in data:
+            # lineIndex = 0
+            modified_gcode = ""
+            lines = active_layer.split("\n")
+            for line in lines:
+                if ";GOOFOO_2-1:" not in line and "M6050" not in line and "T0" not in line:
+                    modified_gcode += line + "\n"
+            data[index] = modified_gcode   
+            index += 1  
+        isInitFlag = 0
+        index = 0
+        for active_layer in data:
+            modified_gcode = ""
+            lines = active_layer.split("\n")
+            for line in lines:
+                if line != "":
+                    modified_gcode += line + "\n"
+                if ";GOOFOO_2-1:" in line:
+                    isInitFlag = 1
+                if isInitFlag == 0:
+                    isInitFlag = 1
+                    layerCount = len(layerObjs)
+                    itemObj = None
+                    for i in range(layerCount):
+                        itemObj = layerObjs[i]
+                        modified_gcode += ";GOOFOO_2-1:sRatio{0:d} fixed{1:d} layer{2:d}\n".format(itemObj['sRatio'],itemObj['fixed'],itemObj['layer'])
+            data[index] = modified_gcode   
+            index += 1            
+    def execute(self, data):
+        setObj = {'sRatio':100,'incRation':0,'fixed':1,'layer':0,'layerCount':1,'layerHeight':.2,'isSetEnd':0,"endlayer":1,'eRatio':100,'isUseSet':0}
+        layerObjs = []
+        self.getSetObj(setObj,data,layerObjs)
+        self.analyData(data,layerObjs,setObj)
+        self.sortLayer(layerObjs,setObj)
+        layerObjs = sorted(layerObjs,key=lambda e:e['layer'])
+        self.delFlag(data,layerObjs)
+        self.analyIncRatio(layerObjs,setObj)
+        self.createCommand(data,layerObjs,setObj)
+        return data

resources/definitions/goofoo_e-one.def.json

@@ -1,7 +1,7 @@
 {
     "name": "goofoo_E-one",
     "version": 2,
-    "inherits": "goofoo_base",
+    "inherits": "goofoo_open",
     "overrides": {
         "machine_name": { "default_value": "e-one" },
         "machine_width": { "default_value": 300 },
@@ -10,7 +10,21 @@
     },
     "metadata": {
         "author": "goofoo",
-        "quality_definition": "goofoo_far",
+        "visible": true,
-        "visible": true
+        "exclude_materials": [
+            "goofoo_bronze_pla",
+            "goofoo_peek",
+            "goofoo_tpe_83a",
+            "goofoo_tpu_87a",
+            "goofoo_tpu_95a",
+            "goofoo_pa_cf",
+            "goofoo_pc",
+            "goofoo_pa",
+            "goofoo_asa",
+            "goofoo_abs",
+            "goofoo_pva",
+            "goofoo_hips",
+            "goofoo_pva"
+        ]
     }
 }

resources/definitions/goofoo_far.def.json

@@ -5,6 +5,12 @@
     "metadata": {
         "author": "goofoo",
         "quality_definition": "goofoo_far",
-        "visible": false
+        "visible": false,
+        "exclude_materials": [
+            "goofoo_bronze_pla",
+            "goofoo_tpe_83a",
+            "goofoo_tpu_87a",
+            "goofoo_tpu_95a"
+        ]
     }
 }

resources/definitions/goofoo_open.def.json

@@ -0,0 +1,22 @@
+{
+    "name": "goofoo_open",
+    "version": 2,
+    "inherits": "goofoo_base",
+    "metadata": {
+        "author": "goofoo",
+        "quality_definition": "goofoo_open",
+        "visible": false,
+        "exclude_materials": [
+            "goofoo_bronze_pla",
+            "goofoo_peek",
+            "goofoo_tpe_83a",
+            "goofoo_tpu_87a",
+            "goofoo_tpu_95a",
+            "goofoo_pa_cf",
+            "goofoo_pc",
+            "goofoo_pa",
+            "goofoo_asa",
+            "goofoo_abs"
+        ]
+    }
+}

resources/definitions/goofoo_t-one.def.json

@@ -17,6 +17,21 @@
             "0": "goofoo_tone_1st",
             "1": "goofoo_tone_2st"
         },
+        "exclude_materials": [
+            "goofoo_bronze_pla",
+            "goofoo_peek",
+            "goofoo_tpe_83a",
+            "goofoo_tpu_87a",
+            "goofoo_tpu_95a",
+            "goofoo_pa_cf",
+            "goofoo_pc",
+            "goofoo_pa",
+            "goofoo_asa",
+            "goofoo_abs",
+            "goofoo_pva",
+            "goofoo_hips",
+            "goofoo_pva"
+        ],
         "visible": true
     }
 }

resources/definitions/goofoo_tiny.def.json

@@ -1,7 +1,7 @@
 {
     "name": "goofoo_Tiny",
     "version": 2,
-    "inherits": "goofoo_far",
+    "inherits": "goofoo_small",
     "overrides": {
         "machine_name": { "default_value": "tiny" },
         "machine_width": { "default_value": 100 },

resources/definitions/goofoo_tinyadd.def.json

@@ -1,7 +1,7 @@
 {
     "name": "goofoo_Tiny+",
     "version": 2,
-    "inherits": "goofoo_far",
+    "inherits": "goofoo_small",
     "overrides": {
         "machine_name": { "default_value": "tinyadd" },
         "machine_width": { "default_value": 120 },

resources/quality/goofoo/goofoo_open_global_0.15_fine.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.25
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*6
+support_interface_height = =layer_height*8
+retraction_speed = 60

resources/quality/goofoo/goofoo_open_global_0.1_efine.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = efine
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*6
+support_interface_height = =layer_height*12
+retraction_speed = 60

resources/quality/goofoo/goofoo_open_global_0.20_standard.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.20
+layer_height_0 = 0.3
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*4
+support_interface_height = =layer_height*5
+retraction_speed = 60

resources/quality/goofoo/goofoo_open_global_0.3_draft.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.3
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*5
+support_interface_height = =layer_height*6
+adaptive_layer_height_enabled = true
+retraction_speed = 60

resources/quality/goofoo/goofoo_small_global_0.15_fine.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_small
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.25
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*6
+support_interface_height = =layer_height*8
+retraction_speed = 60

resources/quality/goofoo/goofoo_small_global_0.1_efine.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = goofoo_small
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = efine
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*6
+support_interface_height = =layer_height*12
+retraction_speed = 60

resources/quality/goofoo/goofoo_small_global_0.20_standard.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_small
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.20
+layer_height_0 = 0.3
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*4
+support_interface_height = =layer_height*5
+retraction_speed = 60

resources/quality/goofoo/goofoo_small_global_0.3_draft.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_small
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.3
+top_bottom_thickness = 0.8
+wall_thickness = =line_width*5
+support_interface_height = =layer_height*6
+adaptive_layer_height_enabled = true
+retraction_speed = 60

resources/quality/goofoo/hips/goofoo_far_0.40_hips_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/hips/goofoo_far_0.40_hips_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/hips/goofoo_far_0.40_hips_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/hips/goofoo_far_0.40_hips_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/hips/goofoo_near_0.40_hips_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/hips/goofoo_near_0.40_hips_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/hips/goofoo_near_0.40_hips_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/hips/goofoo_near_0.40_hips_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/hips/goofoo_open_0.40_hips_draft.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+material = goofoo_hips
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = skirt
+retraction_amount = 6

resources/quality/goofoo/hips/goofoo_open_0.40_hips_efine.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = efine
+material = goofoo_hips
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = skirt
+retraction_amount = 6

resources/quality/goofoo/hips/goofoo_open_0.40_hips_fine.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+material = goofoo_hips
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = skirt
+retraction_amount = 6

resources/quality/goofoo/hips/goofoo_open_0.40_hips_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+material = goofoo_hips
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = skirt
+retraction_amount = 6

resources/quality/goofoo/pc/goofoo_far_0.40_pc_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pc/goofoo_far_0.40_pc_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pc/goofoo_far_0.40_pc_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pc/goofoo_far_0.40_pc_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pc/goofoo_near_0.40_pc_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pc/goofoo_near_0.40_pc_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pc/goofoo_near_0.40_pc_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pc/goofoo_near_0.40_pc_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/peek/goofoo_far_0.40_peek_draft.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 6

resources/quality/goofoo/peek/goofoo_far_0.40_peek_efine.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 6

resources/quality/goofoo/peek/goofoo_far_0.40_peek_fine.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 6

resources/quality/goofoo/peek/goofoo_far_0.40_peek_standard.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 6

resources/quality/goofoo/peek/goofoo_near_0.40_peek_draft.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 4.5

resources/quality/goofoo/peek/goofoo_near_0.40_peek_efine.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 4.5

resources/quality/goofoo/peek/goofoo_near_0.40_peek_fine.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 4.5

resources/quality/goofoo/peek/goofoo_near_0.40_peek_standard.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 cool_fan_enabled = False
 retraction_amount = 4.5

resources/quality/goofoo/petg/goofoo_far_0.40_petg_fine.inst.cfg

@@ -13,5 +13,5 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*4
 speed_layer_0 = 15
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/petg/goofoo_far_0.40_petg_standard.inst.cfg

@@ -13,5 +13,5 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*4
 speed_layer_0 = 15
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/petg/goofoo_near_0.40_petg_fine.inst.cfg

@@ -13,5 +13,5 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*4
 speed_layer_0 = 15
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/petg/goofoo_near_0.40_petg_standard.inst.cfg

@@ -13,5 +13,5 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*4
 speed_layer_0 = 15
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/petg/goofoo_open_0.40_petg_fine.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/petg/goofoo_open_0.40_petg_standard.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/petg/goofoo_small_0.40_petg_fine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_small
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15
+adhesion_type = raft
+retraction_amount = 6

resources/quality/goofoo/petg/goofoo_small_0.40_petg_standard.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_small
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+speed_layer_0 = 15
+adhesion_type = raft
+retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_0.40_pla_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_0.40_pla_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_0.40_pla_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_0.40_pla_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_emarble_0.40_pla_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_draft.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_far
 setting_version = 16
 type = quality
 quality_type = draft
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_efine.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_far
 setting_version = 16
 type = quality
 quality_type = efine
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_fine.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_far
 setting_version = 16
 type = quality
 quality_type = fine
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_esilk_0.40_pla_standard.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_far
 setting_version = 16
 type = quality
 quality_type = normal
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_far_wood_0.40_pla_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 6

resources/quality/goofoo/pla/goofoo_near_0.40_pla_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_0.40_pla_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_0.40_pla_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_0.40_pla_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_draft.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 1
 retraction_speed = 10

resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_efine.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 1
 retraction_speed = 10

resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_fine.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 1
 retraction_speed = 10

resources/quality/goofoo/pla/goofoo_near_bronze_0.40_pla_standard.inst.cfg

@@ -12,6 +12,6 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 1
 retraction_speed = 10

resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_emarble_0.40_pla_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_draft.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_near
 setting_version = 16
 type = quality
 quality_type = draft
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_efine.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_near
 setting_version = 16
 type = quality
 quality_type = efine
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_fine.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_near
 setting_version = 16
 type = quality
 quality_type = fine
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_esilk_0.40_pla_standard.inst.cfg

@@ -7,10 +7,10 @@ definition = goofoo_near
 setting_version = 16
 type = quality
 quality_type = normal
-material = goofoo_eslik_pla
+material = goofoo_esilk_pla
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
 retraction_amount = 4.5

resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_draft.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
-retraction_amount = 4.5
+retraction_amount = 5

resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_efine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
-retraction_amount = 4.5
+retraction_amount = 5

resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_fine.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
-retraction_amount = 4.5
+retraction_amount = 5

resources/quality/goofoo/pla/goofoo_near_wood_0.40_pla_standard.inst.cfg

@@ -12,5 +12,5 @@ variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*2
-adhesion_type = raft
+adhesion_type = skirt
-retraction_amount = 4.5
+retraction_amount = 5

resources/quality/goofoo/pla/goofoo_open_0.40_pla_draft.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+material = goofoo_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 60

resources/quality/goofoo/pla/goofoo_open_0.40_pla_efine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = efine
+material = goofoo_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 60

resources/quality/goofoo/pla/goofoo_open_0.40_pla_fine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+material = goofoo_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 60

resources/quality/goofoo/pla/goofoo_open_0.40_pla_standard.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+material = goofoo_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 60

resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_draft.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+material = goofoo_emarble_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_efine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = efine
+material = goofoo_emarble_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_fine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+material = goofoo_emarble_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_emarble_0.40_pla_standard.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+material = goofoo_emarble_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_draft.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+material = goofoo_esilk_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_efine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = efine
+material = goofoo_esilk_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_fine.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+material = goofoo_esilk_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_esilk_0.40_pla_standard.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+material = goofoo_esilk_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 70

resources/quality/goofoo/pla/goofoo_open_wood_0.40_pla_draft.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Draft Quality
+definition = goofoo_open
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+material = goofoo_wood_pla
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*2
+adhesion_type = skirt
+retraction_amount = 6
+material_bed_temperature = 60